Smeg DWA4510X2 - Manuals

User instructions 6 2. Installation and hook-up Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit th...

User instructions 7 2.1 Water supply connection Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwasher mus...

User instructions 8 DRAIN CONNECTION Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm , or alternatively, place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose. It is important to prevent the ...

User instructions 9 Some components are live even with the ON/OFF button in the OFF position. Before maintenance work on the appliance, remove the plug or turn off the power supply at the wall switch. IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD: AN OMNIPOLAR CIRCUIT BREAKER IN OVERVOLTA...

User instructions 10 3. Description of the controls 3.1 Front panel All the dishwasher control are grouped on the front panel. Programming and option selection are only possible with the door closed . The panel shown is only a guideline example: the form of the lights and buttons may vary depending ...

User instructions 11 PROGRAMS TABLE PROGRAMME NUMBER & SYMBOL LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS DURATION CONSUMPTION MINUT ES (1) WAT ER LITRES POWER KWh (1) 1 SOAK Pans and dishes awaiting completion of the load Cold prew ash 15 5 0,02 2 NORMAL ECO (*) Croc kery and cutlery norm ally s...

User instructions 12 3.2 Washing programs The dishwasher is equipped with a control panel, described in chapter "3. Description of the controls", from which it is possible to carry out all the power switch-on, switch-off and programming operations. Before starting a washing program make sure...

User instructions 13 START PROGRAM To start the dishwasher, press the START/PAUSE button (3) for a few seconds, until the light of the first phase of the selected program starts to flash (confirmation beep). This phase, that updates itself during the cycle, is “indicative” since it is influenced by ...

User instructions 14 INTERRUPTION OF A PROGRAM In order to interrupt a running program it is necessary:  press the START/PAUSE button (3) , the light of the current phase goes out;  keep the button pressed until the PHASES/PROGRAM lights (6) come on (confirmation buzzer). TO CHANGE A PROGRAM To ch...

User instructions 15 TO SAVE ON ENERGY!…AND PROTECT THE ENVIRONMENT  Always use the dishwasher with a full load.  Do not wash the dishes in running water.  Use the washing program that is most appropriate for each type of load.  Do not carry out any preliminary rinsing.  If available, connect t...

User instructions 16 4. Operating instructions Once the dishwasher has been correctly installed, prepare it for use as follows:  Add rinse aid and detergent 4.1 Using the rinse aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door: the deterg...

User instructions 17 ADJUSTING THE RINSE AID DISPENSER SETTING The dishwasher is factory set for medium water hardness. However it possible to change the setting by turning the dispenser’s selector to the desired position: the amount of rinse aid dispensed is proportional to the selector position. ...

User instructions 19 4.2 General warnings and recommendations Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be washed and their loading. There are generally no constraints on the washing of domestic dishes, but in certa...

User instructions 21 4.3 Using the baskets The dishwasher has a capacity of 10 place-settings , including serving dishes. LOWER BASKET Used for items with a heavier degree of soiling. All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the...

User instructions 22 BOTTOM BASKET INSERTS Some models are equipped with bottom basket inserts which improve the drying of dishes. The inserts are supplied in the accessories bag; to use them, simply fit them into place as shown. CUTLERY BASKET The cutlery should be arranged in an orderly manner ins...

User instructions 23 UPPER BASKET It is recommended to load the upper basket with small or medium-sized items such as glasses, small plates and saucers, tea or coffee cups, shallow bowls and light objects made from heat resistant plastic. If the upper basket is used in the lowermost position, it can...

User instructions 24 ADJUSTING THE UPPER BASKET The height of the upper basket can be according to requirements and the size of the dishes in the lower basket. Pull-out adjustment system:  Turn the retainer E on both runners, right and left, through 90°  Remove the basket  Lift the basket and fit...

User instructions 25 5. Cleaning and maintenance Before carrying out any work, always unplug the appliance from the electrical supply or turn off the dual-pole dedicated switch. 5.1 General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and door...

User instructions 26 CLEANING THE OSCILLATING BOTTOM SPRAY ARM ● Take hold of the bottom spray arm unit and pull it upward to release. ● Separate the oscillating arm A from the spray arm B . ● Turn the oscillating arm A upside down to release the toothed wheel C by pressing the teeth D and turning t...

User instructions 27 CLEANING THE FILTER UNIT  The central filter should be cleaned regularly. To remove it, pull the spray arm assembly upwards.  Turn the microfilter M anticlockwise to release and extract it, then lift the stainless steel filter F .  Push the central filter H from below to extr...

User instructions 31 FAULT DESCRIPTION E7 Turbine flow-regulator malfunction (relevant models only) The intake water quantity is not being measured accurately. Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the proble...