Page 3 - Contents
Contents 1 1. Safety and operating instructions ___________________________ 2 2. Installation and hook-up __________________________________ 5 3. Description of the controls ________________________________ 9 4. Operating instructions ___________________________________ 20 5. Cleaning and maintenanc...
Page 4 - Safety instructions; Safety and operating instructions
Safety instructions 2 1. Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QU...
Page 7 - Installation instructions; - To build in the dishwasher, the special kit must be purchased from
Installation instructions 5 2. Installation and hook-up Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source...
Page 8 - Water supply connection; CONNECTING TO THE WATER SUPPLY
Installation instructions 6 2.1 Water supply connection Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwa...
Page 9 - Electrical connection and precautions; THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION.; IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:
Installation instructions 7 2.2 Electrical connection and precautions CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SA...
Page 10 - FOR GREAT BRITAIN ONLY:; THIS APPLIANCE MUST BE EARTHED.; Fuse replacement
Installation instructions 8 FOR GREAT BRITAIN ONLY: THIS APPLIANCE MUST BE EARTHED. Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows: 1. Remove t...
Page 11 - User instructions; Description of the controls; Front panel
User instructions 9 3. Description of the controls 3.1 Front panel The ON/OFF is on the top edge of the panel, and all the dishwasher’s other controls and monitoring devices are on the central display. Programming and option selection are only possible with the door closed. NOTA: The displays illust...
Page 13 - PROGRAMS TABLE
User instructions 11 Flexi Tabs Option recommended for the use of multi-function tablet detergent. HYCLEAN Increases the temperature of the final hot rinse to 70°C to ensure a further reduction in the bacteria level. Spread HALF LOAD WASH Allows washing of just a few dishes placed in both baskets. P...
Page 14 - NORMAL; Reference program as per AS/NZS 2007; or 2 cold rinses depending on the model.
User instructions 12 PROGRAMME, NUMBER & SYMBOL LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS DURATION CONSUMPTION MINUTES (1) WATER LITRES POWER KWh (1) 1 SOAK Pans and dishes awaiting completion of the load. Cold prewash 15 3,5 0,02 2 NORMAL ECO (*) Crockery and cutlery normally soiled Cold prewa...
Page 15 - QUICK TIME PROGRAMS; (see relevant section for explanation of functioning modes)
User instructions 13 QUICK TIME PROGRAMS (see relevant section for explanation of functioning modes) The ENERSAVE option cannot be used with soak, ultra clean, or any programs which do not include the final drying stage. PROGRAMME NUMBER E SYMBOL LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS DURATION C...
Page 16 - Washing programs; Before starting a washing program make sure that:; SWITCHING ON
User instructions 14 3.2 Washing programs The dishwasher is equipped with a control panel, described in chapter "3. Description of the controls", from which it is possible to carry out all the power switch-on, switch-off and programming operations. Before starting a washing program make sure...
Page 17 - STARTING THE PROGRAM; To interrupt a program in progress:; CHANGING; To change the running program it is necessary:; to interrupt the running program (see “I; select the new program; start the program (see “S
User instructions 15 STARTING THE PROGRAM To start the dishwasher, press the START/PAUSE button (3) for a few seconds, until the light of the first phase of the selected program starts to flash (confirmation beep). As the program runs, the PHASES/PROGRAM lights (5) will indicate the current cycle st...
Page 18 - ANNULLING A PROGRAM; To annul the program; Keep the START/PAUSE button (3) pressed until the PROGRAM; ” will appear; ”. The program will resume from the; (available in all programs except the soak program)
User instructions 16 ANNULLING A PROGRAM To annul the program • press the START/PAUSE button (3 ) for a few seconds; the light of the phase in progress remains on and the light of the program in progress flashes (confirmation beep); • Keep the START/PAUSE button (3) pressed until the PROGRAM PHASES ...
Page 19 - ENERSAVE
User instructions 17 ENERSAVE This option can be selected with the wash programme of choice to further reduce energy consumption. This ensures perfect drying and greater control of rinsing temperatures, which can be kept at lower levels for significant energy saving. Enersave is activated automatica...
Page 20 - be pressed again, to set the delay required (; is pressed for a few seconds, the DISPLAY (9) shows the time left (time; , duration of the
User instructions 18 PROGRAM DELAY The PROGRAM DELAY button can be pressed to delay the start of the washing program by from 1 to 12/24 hours depending on the model. This option allows the dishwasher to be operated at the time of day of the user's choice. The first time the PROGRAM DELAY button is p...
Page 21 - ENERGY MANAGEMENT
User instructions 19 ENERGY MANAGEMENT After 5 minutes of waiting (washing cycle completed, stopped or set but not started) the dishwasher switches to a standby state to reduce energy consumption. In this state, the dishwasher indicator panel (lights or display depending on model) functions more slo...
Page 22 - Operating instructions; Adjust the water softening system; Using the water softening system
User instructions 20 4. Operating instructions Once the dishwasher has been correctly installed, prepare for use as follows: • Adjust the water softening system; (present only on some models) • Add the regenerating salt; (only on some models) • Add the rinse aid and detergent. 4.1 Using the water so...
Page 23 - ADJUSTING THE WATER SOFTENING SYSTEM
User instructions 21 • Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system. • When necessary, refill the regenerating salt container before starting the washing program. In this way, the excess saline solution will be immediately removed ...
Page 24 - WATER HARDNESS TABLE; SETTING; Using the rinse aid and detergent dispensers; The
User instructions 22 WATER HARDNESS TABLE WATER HARDNESS SETTING German degrees (°dH) French Degrees (°dF) 0 - 6 0 - 11 H 0 NO SALT 7 - 10 12 - 18 H 1 11 - 15 19 - 27 H 2 16 - 21 28 - 37 H 3 22 - 28 38 - 50 H 4 29 - 35 51 - 62 H 5 36 - 50 63 - 90 H 6 Contact your local water board for information on...
Page 25 - ADDING THE RINSE AID; Rotate the container cap anticlockwise by 1⁄4 of a turn and remove it.; ADJUSTING THE RINSE AID DISPENSER SETTING
User instructions 23 ADDING THE RINSE AID The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door. To add rinse aid: • Open the ...
Page 26 - ADDING THE DETERGENT; - Detergents containing phosphates are more effective against
User instructions 24 ADDING THE DETERGENT To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully. During the washing cycle, the dispenser will be opened automatically. • When a program with hot prewash is selected (see program table), extra det...
Page 27 - General warnings and recommendations
User instructions 25 The introduction of detergent into the rinse aid dispenser, even in liquid form, will damage the dishwasher. 4.3 General warnings and recommendations Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be...
Page 29 - Using the baskets; The dishwasher has a capacity of 15 place-settings.
User instructions 27 4.4 Using the baskets The dishwasher has a capacity of 15 place-settings. LOWER BASKET The lower basket receives the full force of the lower spray arm, and should therefore be used for the “toughest” items with a heavier degree of soiling. All types and combinations of loads are...
Page 31 - LOADING THE LOWER BASKET
User instructions 29 To lie completely flat, lift the end and turn it towards you so that the retainer F rotates into place above point S. LOADING THE LOWER BASKET Carefully load flat plates, soup plates, dessert and serving dishes, positioning them vertically. Pots, pans and their covers must be lo...
Page 32 - FLEXI DUO TOP RACK (on some models only)
User instructions 30 FLEXI DUO TOP RACK (on some models only) This comprises two independent sliding, pull-out tray racks for easier loading/unloading of cutlery. Various loading systems and configurations are possible. For example, tea cups can be loaded with the right-hand rack set in the low posi...
Page 33 - CUTLERY BASKET
User instructions 31 CUTLERY BASKET The basket has removable top grids into which items of cutlery should be inserted to keep them properly spaced and allow water to pass between them effectively. The top grids and central lid are in the bag of accessories. The central lid functions as a lid only. T...
Page 34 - UPPER BASKET
User instructions 32 UPPER BASKET It is recommended to load the upper basket with small- or medium-sized items such as glasses, small plates, tea or coffee cups, shallow bowls and light objects made from heat resistant plastic. If the upper basket is used in the lowermost position, it can also be lo...
Page 36 - ADJUSTING THE UPPER BASKET; Pull out both the basket guides.; Return the stops to their original position.
User instructions 34 ADJUSTING THE UPPER BASKET The height of the top basket can be adjusted to allow large dishes or pans to be placed in the bottom basket. The adjustment procedure may be type A or B, depending on the dishwasher model purchased. Version A: pull-out with adjustment in two positions...
Page 37 - Cleaning and maintenance; Avoid the use of acidic or abrasive detergents.; ORBITAL
User instructions 35 5. Cleaning and maintenance Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device. 5.1 General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and...
Page 38 - CLEANING THE FILTER UNIT; remove the centre filter by lifting it upwards.
User instructions 36 CLEANING THE FILTER UNIT • It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove the filter, grip the tabs, turn them anticlockwise and lift upwards; • push the centre filter D from the underside to remove it from the micro-filter:...
Page 39 - Plug the power cord back into the socket.
User instructions 37 BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE: • Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes. • Plug the power cord back into the socket. • Reconnect the water ...
Page 40 - there is rinse aid inside the special container
User instructions 38 If the dishes fail to dry or remain dull, check that: • there is rinse aid inside the special container; • the rinse aid dispenser setting is correct; • the detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box...
Page 41 - TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM
User instructions 39 6. Troubleshooting The dishwasher is equipped with a self-diagnostics system that is capable of detecting and signalling a number of possible faults TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM FAULT DESCRIPTION Er 01 The anti-flooding system (where present) has been ...
Page 42 - TECHNICAL DATA; 5 Standard place settings; Water supply pressure; See rating plate
User instructions 40 TECHNICAL DATA Width 597 ÷ 599 mm Depth measured flush with the outer edge of the control panel Free standing: 600 mm Semi-integrated: 570 mm Height (depending on models) Free standing: from 850 mm to 890 mm from 890 mm to 930 mm Semi-integrated: from 820 mm to 890 mm from 860 m...
