Siemens SC9000 - Manuals

DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 2 of 4 Install M Series Arm 1. The Slide has (2) ¼-20 x ¾” SHSS set screws that, when tightened, secure the Arm at the desired location within the Channel. 2. While supporting the bottom of the Arm with one hand, guide the Slide (at the rear of the arm) ...

DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 3 of 4 INSTRUCTIONS FOR USE – M Series Pivot Arm Pivot 1. To pivot the Arm (near the wall), simply push on the side of the Arm or mounted device. 2. To adjust the pivot tension at the Slide, use a ½” (or 13mm) socket driver to tighten or loosen the Pivot...

DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 4 of 4 Cleaning 1. The mounting assembly may be cleaned with most mild, non-abrasive solutions commonly used in the hospital environment (e.g. diluted bleach, ammonia, or alcohol solutions). 2. The surface finish will be permanently damaged by strong che...