Sharp LC-42SH7E - Manuals - manualsarea.com

Page 2 - operation manual; Contents; the actual operations.; enGliSH; Automatically switch the TV to standby; ENGLISH

operation manual Contents The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from • the actual operations. enGliSH Contents �� 1 introduction ��...

Page 3 - precautions when transporting the tV; mounting that results in accident or injury.; introduction; Dear SHarp customer

Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to • clean the product. Do not use liquid cleaners or aerosol cleaners.Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, • laundry tub, swimming pool and in a we...

Page 4 - BI; remote control unit; oœpπ; To select the subpage when the

introduction BI (poWer) Press to turn the LCD TV on or enter standby mode. Ø (input SourCe) Select an input source. 0-9 DiGit ButtonS To select a TV channel directly. epG Press this button to display electronic programme guide when watching digital channels. pre pr To display the previous selected T...

Page 5 - Remote control sensor; AC IN

introduction tV (Front view) B (Standby/On) indicator Remote control sensor tV (rear view) AC IN 75Ω 19” 75Ω AC IN POWER button Volume buttons MENU button COMMONINTERFACEslot Composite(AV IN, AV/LR) Earphone Output AC IN COMMONINTERFACEslot Composite(AV IN, AV/LR) S-VIDEO Service socket HDMI 3 PC IN...

Page 6 - preparation; Supplied accessories; Operation Manual; mount the tV stand; Put the TV face down on a safe surface that is; To detach the TV stand, perform the steps in reverse; Wall mounting; Screw type; note; At the time of purchasing wall bracket, please check if; Bundling the cables

preparation Supplied accessories Operation Manual Quick Setup Guide Operation Manual Quick Setup Guide AC cord (x1)Product shape variesin some countries ECO EPG YPbPr PR LIST FREEZE MENU /EXIT P PRE PR Remote control (×1)AAA battery (×2) Cable clamp (x1)Attached in back of the TV. x 3 19” x 4 Stand ...

Page 7 - installation of batteries; using the remote control; EPG; menu / eXit to return to the previous; Menu; exit the menu Screen

preparation installation of batteries Insert two AAA batteries into Remote control. 1� Make sure ( k ) and ( l ) are facing the proper direction. Replace the cover. 2� note If the remote control will not to be used for a long • time, remove the batteries to avoid remote control damage. Caution Impro...

Page 8 - Quick guide; initial installation overview; language setting; Country setting; Start searching channels; Watch tV

Quick guide initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. preparation Connect antenna cable to the antenna terminal. 75Ω If necessary, insert CA card into the...

Page 9 - Watching tV; Daily operation; turning on/off the power; Changing channels; Standby mode; If you are not going to use this TV for a long period of; Selecting external video source; The direct control menu screen will disappear if left

Watching tV Daily operation turning on/off the power Press B on the TV. Switch it off by pressing B on the TV. MENU Changing channels With p <> : YPbPr P Standby mode E to standby mode If the TV set is switched on, you can switch it to standby by pressing B on the remote control. E Switching o...

Page 10 - View a list of currently broadcast digital programmes.; Switch on epG; The first time you use EPG, you may be prompted; epG on the remote control, the “Now; colour buttons on the remote control; prev page

Watching tV epG (electronic programme Guide) EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes. There are two types of EPG, “Now and Next” and “7 or 8 day” EPG. “Now and Next” is a...

Page 11 - teletext; Teletext will not work if the selected signal type is RGB.; Buttons for teletext operations; rs; Select a teletext language

Watching tV teletext What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchan...

Page 12 - use smart picture; Apart from manually adjusting picture settings, you; Sound; adjust sound settings; This section describes how to adjust sound settings.; picture; adjust picture settings; tV menu

use smart picture Apart from manually adjusting picture settings, you can use Smart picture to set your TV to a predefined picture setting. Press 1� menu / eXit on the remote control and select picture. Press 2� oK or ≥ to enter picture and select Smart picture� Press 3� ≤≥ to select one of the foll...

Page 13 - Description): Adjusts the volume of visually; use Sound mode; Speech; tV; Re-installing channels modifies the channel list.; Select a digital audio language; If your selected audio language is not broadcasted, the; automatically install channels

Balance: • Sets the balance of the left and right speakers to best fit your listening position.Virtual Surround: • Automatically switches the TV to the best surround sound mode available from a broadcast. Select on or off. Digital audio out: • Selects the type of digital audio out to pCm / off / Dol...

Page 14 - update Scan

tV menu E Step 3: automatic installation Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels. Press 1� menu / eXit on the remote control and select tV ≥ Channels� note You are prompted to enter current password to enter • Channel...

Page 15 - Channel Skip

tV menu In the 3� Start Frequency (mHz) box, enter the frequency by using the digit buttons on the remote control. Press 4� <> to select Scan up or Scan Down to scan the next available analogue channel from the frequency you have entered. Press 5� oK or ≥ to start scanning. When complete, foll...

Page 16 - Change picture format; auto; analogue Ch Fine tune

tV menu Features Change picture format Change the picture format to suit your content. Press 1� ∏ repeatedly to select one of the following picture formats. Alternatively, press menu / eXit and select Features > picture format. P auto The Automatic format for DTV transports streams with AFD infor...

Page 17 - automatically switch the tV off (off time); Off time switches the TV to standby at a specified time.; Before using off time function, you have to set the time; Sleep timer switches the TV to standby after a defined; When you press any button on the remote control with; Wide; When source input is PC mode, only Full screen and 4:3; Change the time zone

Select 4� auto Synchronization and press ≤≥ to select: on: • Sets the clock automatically the same with the digital signal time. (Only if digital signal is available). off: • Press <> to set your system Date or system time manually by using the digit buttons on your remote control. When the cl...

Page 18 - use subtitles; If your selected subtitle language is not broadcasted, the; st Subtitle; language you selected is not; nd Subtitle; language will be displayed.; HDmi overscan; auto to scan the picture automatically.; Select; underscan to disable.; Select; overscan to activate.; reset Default; parental; access parental menu

tV menu use subtitles You can enable subtitles for each TV channel. Subtitles are broadcasted via teletext or DVB-T digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language. E Set analogue subtitles Press 1� menu / eXit on the remote cont...

Page 19 - lock one or more channels; Select your country”; “Access Parental menu”; lock one or more connected devices; “Access Parental menu”; italy; Select your country”; Set / Change password; “Access Parental menu”; Clear all parental settings; “Access Parental menu”; eco

note: You have to enter a 4-digit password everytime to • access parental menu. Enter “0000” as the default password. • If you forget your password, enter “5351” to override • any existing passwords. lock one or more channels Enter your password to access the 1� parental menu. (See page 17 “Access P...

Page 20 - Connecting external devices; HDmi connection; example of connectable devices; DVD; Using an DVI/HDMI adapter cable, the digital video; Supported video signal:; VCR; Before connecting ��; HDMI cable; Component cable

Connecting external devices HDmi connection example of connectable devices E DVD E Blu-ray player/recorder The HDMI connections (High Definition Multimedia Interface) permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are tra...

Page 21 - SCart connection; Decoder; SCART cable; recorder; Audio cable

SCart connection example of connectable devices E Decoder E When using the SCart 1 Full SCART, which transmits RGB, S-Video and CVBS in, and CVBS tuner out. SCART SCART 1 19” 26”32”42” example of connectable devices E VCR E DVD recorder E When using the SCart 2 Half SCART, which transmits S-Video or...

Page 22 - Speaker / amplifier connection; Connecting an amplifier with digital audio; inserting a Ca Card; inserting the Ca Card into the Ci module; access Ci module service; Digital audio in

Connecting external devices Speaker / amplifier connection E Connecting an amplifier with digital audio input / analogue audio input SPDIF OUT R L R L AUDIO OUT AUDIO IN 19”26”32” 26”32” 42” 42” inserting a Ca Card In order to receive coded digital stations, a Common Interface Module (CI Module) and...

Page 23 - Digital connection; analogue connection; Connecting external device; Connecting a pC; Supported display resolutions; Resolution; Resolution

Digital connection HDMI DVI PC IN PC HDMI 19” 26”32” 19”26”32” 42” 42” analogue connection DVI-I PC HDMI VGA 19” PC IN 26”32”42” Connecting external device Connecting a pC Supported display resolutions Computer formats (pC) Resolution Refresh rate 640 x 480 60Hz 800 x 600 56Hz 800 x 600 60Hz 1024 x ...

Page 24 - appendix; problem; troubleshooting

appendix problem possible Solution No picture 1. Connect power cord correctly. 2. Turn on power. 3. Connect signal cable correctly. 4. Press any button on the LCD TV. Abnormal colours Connect signal cable correctly. Twisted picture 1. Connect signal cable correctly. 2. Please use compatible signal. ...

Page 25 - item; Specification

appendix item 19 o lCD Colour tV, model: lC-19SH7e 26 o lCD Colour tV, model: lC-26SH7e 32 o lCD Colour tV, model: lC-32SH7e LCD screen size 19 o diagonal 26 o diagonal 32 o diagonal Number of dots 3,147,264 dots (1366 g 768 g 3 dots) 3,147,264 dots (1366 g 768 g 3 dots) 3,147,264 dots (1366 g 768 g...

Page 26 - Refer to the inside back cover for dimensional drawings.

appendix item 42 o lCD Colour tV, model: lC-42SH7e LCD screen size 42 o diagonal Number of dots 6,220,800 dots (1920 g 1080 g 3 dots) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function TV-Standard Analogue CCIR (B/G, I, D/K, L/L’) Digital DVB-T (2K/8K OFDM) Receiving Channel VHF/UH...

Page 27 - are held by SHARP or by third parties.; Software developed by SHarp and open source software; other license agreement.; acknowledgements; • linux kernel • modutils • glibc • zlib • libpng; environmental specifications; Cautions regarding use in high and low temperature environments; other information

information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHarp and open source software The copyrights for the s...

Page 28 - trademarks; of HDMI Licensing LLC.”

appendix trademarks “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks • of HDMI Licensing LLC.” The “HD ready” Logo is a trademark of EICTA. • The “HD TV” Logo is a trademark of EICTA. • The “HD TV 1080p” Logo is a trademark of EICTA. • The DVB log...