Shark AH450 26 - Manuals - manualsarea.com

Page 2 - Contents; Thank you for; Shark

1 A U S T : 1 8 0 0 8 9 0 8 4 0 TECHNICAL SPECIFICATIONS: Voltage: 220~240V, 50/60Hz Watts: 600W Contents Getting to Know Your Shark ® Rocket ® Powerhead Vacuum ��3 Assembly ��...

Page 3 - READ ALL INSTRUCTIONS BEFORE USE; IMPORTANT SAFEGUARDS; always be observed, including the following:; necessary to keep appliance out of reach of children during use.; CAUTION; THE MOTORIZED POWER NOZZLE, TELESCOPING WAND, AND HANDLE; • These are not seviceable parts�; WARNING; DO NOT use if the appliance is not working, has been dropped, dropped; GENERAL USE; SAVE THESE INSTRUCTIONS

2 N Z : 0 8 0 0 0 0 2 9 9 9 READ ALL INSTRUCTIONS BEFORE USE IMPORTANT SAFEGUARDS When using an electrical appliance, basic safety precautions should always be observed, including the following: WARNING This appliance is not intended for use by persons with reduced physical, sensory or mental capabi...

Page 4 - GETTING TO KNOW YOUR SHARK

MAIN UNIT1 Power/LO/HI Switch 2 Upper Cord Hook 3 Height Adjust Button/ Telescoping Wand 4 Lower Cord Hook 5 Dust Cup Release Foot Pedal 6 Suction Release 7 Brushroll Indicator Light 8 Dust Cup 9 Brushroll Cover Release ACCESSORIES10 All-Surface Brushroll 3 A U S T : 1 8 0 0 8 9 0 8 4 0 GETTING TO K...

Page 5 - WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?

STEP 1 ASSEMBLY IMPORTANT: Always inspect wires for damage before assembly� 1 Insert the upper part of the Telescoping Wand into the lower portion while pressing the HEIGHT ADJUST button� Make sure not to pinch the wires� Push the two parts together until you hear them click in place� VACUUMING STEP...

Page 6 - SUCTION RELEASE; STORAGE; LO; USAGE; CHOOSING THE APPROPRIATE SETTING

SUCTION RELEASE This unit has a Suction Control Button to help with push and pull on high-pile carpets and to release suction when vacuuming area rugs� Open to minimize suction� Be sure to close again for maximum suction� T H I C K C A R P E T RELEASE T H I C K C A R P E T RELEASE The Shark ® Rocket...

Page 7 - MAINTENANCE; Make sure unit is off and cord is unplugged.

FI LT ER ACCESS EMPTYING THE DUST CUP1 Detach the removable Dust Cup from the Motorized Floor Nozzle by pressing the Dust Cup Release Foot Pedal located on the left side near the Nozzle� 2 Holding the Dust Cup by the handle, lift it up to remove it from the Motorized Floor Nozzle� 3 Hold the Dust Cu...

Page 8 - CLEANING THE POWERHEAD; IMPORTANT

MAINTENANCE - cont. IMPORTANT: Remove Brushroll from unit before rinsing. IMPORTANT: Make sure Brushroll is completely dry before replacing in the vacuum. Make sure unit is off and cord is unplugged. CLEANING THE POWERHEAD TO ACCESS THE BRUSHROLL1 Slide the Brushroll Cover Release Buttons out� 2 Pul...

Page 9 - TROUBLESHOOTING GUIDE

8 N Z : 0 8 0 0 0 0 2 9 9 9 Vacuum is not picking up dirt. No suction or light suction.• Check filters to see if they need cleaning� Follow instructions for rinsing and completely air-drying the filters before re-inserting into the vacuum� • Dust Cup may be full; empty Dust Cup�• Check Motorized Flo...

Page 10 - NOTES

Page 11 - FIVE (5) YEAR LIMITED REPLACEMENT WARRANTY STATEMENT

1 0 N Z : 0 8 0 0 0 0 2 9 9 9 Euro-Pro, Rocket and Shark are registered trademarks of Euro-Pro Operating LLC� FIVE (5) YEAR LIMITED REPLACEMENT WARRANTY STATEMENT If your product becomes defective due to faulty material or workmanship within a period of 5 years from the date of purchase, we warrant ...

Page 12 - Exclusively Distributed

AH450ANZ _26_150922_1 © 2015 Euro-Pro Operating LLC Illustrations may differ from actual product� We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice� Printed in China GMA-102233-EA-012 Exclusively Distributed Through...