Schneider Electric ION7650 - Manuals

Schneider Electric ION7650 – Manual in PDF format online.

Manuals:

Manual

Manual Schneider Electric ION7650

Summary

Page 3 - Danger; Installation Considerations; ANGER; FCC Notice

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 3 Danger This symbol indicates the presence of dangerous voltage within and outside the product enclosure that may constitute a risk of electric shock, serious injury or death to persons if proper precaut...

Page 4 - Network Compatibility Notice for the Internal Modem

PowerLogic ION7550 / ION7650 Installation Guide 4 © 2007 Schneider Electric. All rights reserved. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. O...

Page 5 - Integrated Display Model; Available Options

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 5 PowerLogic ION7550 / ION7650 Models Integrated Display Model Comes with front optical port. TRAN (transducer) Model The TRAN model has no display. Available Options Notes 1 Standard = password protected...

Page 6 - Before You Begin; Recommended Tools; Meter Overview; Front Panel Button Functions

PowerLogic ION7550 / ION7650 Installation Guide 6 © 2007 Schneider Electric. All rights reserved. Before You Begin Before installing the meter, familiarize yourself with the steps in this guide and read the safety precautions presented on the “Installation Considerations” page. D ANGER Do not power ...

Page 7 - Unit Dimensions; Basic Model — Rear View

Page 8 - Step 1: Mount the Meter; Environmental Specifications; Step 2: Wire the Ground Terminal

PowerLogic ION7550 / ION7650 Installation Guide 8 © 2007 Schneider Electric. All rights reserved. Step 1: Mount the Meter Environmental Specifications Meter Batter y Considerations The meter’s battery life expectancy depends on both temperature and the amount of time the meter is without power. For ...

Page 9 - Form C Digital Outputs: Mechanical Relays R1 - R3

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 9 Step 3: Wire the Digital I/O and Analog I/O Form C Digital Outputs: Mechanical Relays R1 - R3 Form A Digital Outputs: Solid State Relays D1 - D4 Type Form C (R1, R2, R3) Contacts K (common), Y (NO), Z (...

Page 11 - OTE

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 11 Analog Inputs (Meter Ordering Option): AI1 to AI4 N OTE Do not connect the analog inputs of the I/O card to the analog outputs on the same I/O card. Analog Outputs (Meter Ordering Option): AO1 to AO4 N...

Page 12 - Step 4: Wire the Voltage and Current Inputs; Voltage Inputs

PowerLogic ION7550 / ION7650 Installation Guide 12 © 2007 Schneider Electric. All rights reserved. Step 4: Wire the Voltage and Current Inputs Voltage Inputs Current Inputs: Class 20 Current Inputs (5A Option) Current Inputs: Class 2 Current Inputs (1A Option) N OTE The appropriate Volts Mode settin...

Page 13 - LINE

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 13 4-Wire Wye, 3-Element, Direct Connection Diagram 347 V L-N / 600 V L-L max.VOLTS MODE = 4W-Wye 4-Wire Wye, 3-Element, 3 PTs Connection Diagram Use PTs for voltages over 347 V L-N / 600 V L-L.Wye (Star)...

Page 15 - Single Phase Connection Diagram

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 15 3-Wire Delta, 2½-Element, 2 PTs & 3 CTs Use PTs for voltages over 600 V L-LVOLTS MODE = Delta Single Phase Connection Diagram 277 V L-N / 554 V L-L max. Use PTs for higher voltages.VOLTS MODE = Sin...

Page 16 - Step 5: Wire the Communications

PowerLogic ION7550 / ION7650 Installation Guide 16 © 2007 Schneider Electric. All rights reserved. Step 5: Wire the Communications RS-232 Connections (COM1) RS-485 Connections (COM1 and COM2) Infrared Connections (COM4) Null modem cable pinout Pin 3 - Transmit Data - Pin 2 Pin 2 - Receive Data - Pin...

Page 17 - Ethernet TCP/IP Ser vice Ports; Internal Modem Connection (COM3 if equipped)

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 17 Ethernet Connections (if equipped) 10BASE-T / 100BASE-TX 100BASE-FX (Fiber) Ethernet TCP/IP Ser vice Ports Internal Modem Connection (COM3 if equipped) Pin 1: Transmit Data +Pin 2: Transmit Data -Pin 3...

Page 19 - Password; Selecting the Front Panel Language

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 19 Password A password is required for all front panel configuration changes and to enter the Security Setup menu. The password is set to 0 (zero) in the factory. The front panel only prompts you for the ...

Page 20 - Front Panel Setup Menu Settings

PowerLogic ION7550 / ION7650 Installation Guide 20 © 2007 Schneider Electric. All rights reserved. Front Panel Setup Menu Settings The following table lists all settings that can be configured via the front panel. Menu Setting Description Range (Values) Default BASIC SETUP VOLTS MODE The power syste...

Page 23 - Step 9: Verify Meter Operation

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 23 1 A baud rate of 300 bps is only intended for paging applications. 2 Serial number = PA-0302B222-01, Unit ID = 2222 3 Default IP ADDRESS = 172.16.xxx.xxx, where the last two bytes (decimal) match the l...

Page 24 - Phasor Diagrams; DELTA phasors for UNITY Power Factor (resistive load)

PowerLogic ION7550 / ION7650 Installation Guide 24 © 2007 Schneider Electric. All rights reserved. The LEDs on the front panel indicate the following: Phasor Diagrams You can also view the meter’s phasor diagram in real time. Use the Phasor Viewer available in PowerLogic ION Setup v2.1 and later (fr...

Page 27 - Step 10: View Meter Data; Display Screens

PowerLogic ION7550 / ION7650 Installation Guide © 2007 Schneider Electric. All rights reserved. 27 Step 10: View Meter Data Use the softkeys to select which data to display. Use the left and right arrow buttons to scroll through the available display screens. Display Screens * Additional display scr...