Schneider Electric 400 - Manuals

Schneider Electric 400 – Manual in PDF format online.

Manuals:

Manual

Manual Schneider Electric 400

Summary

Page 3 - Foreword

TAC AB, 2003-07-01 0-004-7771-2 (GB), 3 (36) TAC Xenta 400 I/O modules Foreword Foreword This handbook describes the I/O modules of the TAC Xenta 400family. The descriptions of these were previously included in the manual“TAC Xenta 400 Handbook”, but as the handbooks for the TAC Xenta300 and 401 wer...

Page 4 - List of revisions

TAC Xenta 400 I/O modules Foreword 4 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 List of revisions Part no. Comment Author Date 0-004-7771-0 Original edition. KW 1999-11-20 0-004-7771-1 TAC Xenta 471 and 491/492 added. KW 2000-09-01 0-004-7771-2 Operation temp. for Operation TAC Xenta 421XT and 422XT...

Page 5 - TAC Xenta

TAC AB, 2003-07-01 0-004-7771-2 (GB), 5 (36) TAC Xenta 400 I/O modules Contents TAC Xenta ® 400 I/O modules This document contains proprietary information of TAC AB and is made available solely to those who operate and maintain TAC AB equipment. Disclosure,reproduction or use of either the documents...

Page 7 - Introduction; TAC Xenta 400 I/O modules; The manual has the following contents:; Chapter 2

TAC AB, 2003-07-01 0-004-7771-2 (GB), 7 (36) TAC Xenta 400 I/O modules 1 Introduction 1 Introduction 1.1 TAC Xenta 400 I/O modules The TAC Xenta 400 is a series of input/output modules designed to beconnected to the TAC Xenta 300 or 401 type controllers. The installation procedures and technical dat...

Page 8 - More information; • a brief installation instruction, “0FL”, included at delivery

8 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 1 Introduction 1.3 More information The TAC Xenta 400 I/O modules and the other TAC Xenta units arealso described in the following documents: • the “TAC Xenta 300 and 401 Handbook”, part no. 0-004-7768 • the “TAC Xenta OP Handboo...

Page 9 - I/O modules in the TAC Xenta 400 series; Hardware units; I/O expansion modules

TAC AB, 2003-07-01 0-004-7771-2 (GB), 9 (36) TAC Xenta 400 I/O modules 2 I/O modules in the TAC Xenta 400 series 2 I/O modules in the TAC Xenta 400 series 2.1 Hardware units The TAC Xenta freely-programmable controllers consist of the follow-ing units. • The TAC Xenta 301/302/401 controller . The co...

Page 11 - Configurations

TAC AB, 2003-07-01 0-004-7771-2 (GB), 11 (36) TAC Xenta 400 I/O modules 2 I/O modules in the TAC Xenta 400 series 2.2 Configurations The I/O modules of the TAC Xenta 400 series can be used in differentconfigurations, for example:• Together with a stand-alone controller.• With controllers and OPs in ...

Page 13 - Technical description; Common features

TAC AB, 2003-07-01 0-004-7771-2 (GB), 13 (36) TAC Xenta 400 I/O modules 3 Technical description 3 Technical description 3.1 Common features 3.1.1 Terminals In all the modules, the first four screw terminals are used in the sameway, i.e. two for the power supply and two for networkcommunication. ~ 0 ...

Page 14 - except

14 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 3 Technical description 3.1.3 Technical data, common to all Supply voltage (G, G0) ................................. 24 V AC ±20%, 50/60 Hz ................................................................................. or 19–...

Page 15 - The TAC Xenta 411/412 Digital Input module; Type

TAC AB, 2003-07-01 0-004-7771-2 (GB), 15 (36) TAC Xenta 400 I/O modules 3 Technical description 3.2 The TAC Xenta 411/412 Digital Input module The modules have ten digital inputs and these inputs can also be usedas pulse counters. In addition, the TAC Xenta 412 is equipped with LED status indicators...

Page 16 - The TAC Xenta 421/422 Digital Input and Output module; or

16 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 3 Technical description 3.3 The TAC Xenta 421/422 Digital Input and Output module The modules have four digital inputs and five digital outputs. The inputscan also be used as pulse counters. In addition, the TAC Xenta 422 is equ...

Page 18 - The TAC Xenta 451/452 Analog Input and Output module

18 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 3 Technical description 3.4 The TAC Xenta 451/452 Analog Input and Output module The modules have four universal inputs, four thermistor inputs and twoanalog outputs. The universal inputs can also be used as digital inputsor pul...

Page 19 - –as Thermistor Inputs

TAC AB, 2003-07-01 0-004-7771-2 (GB), 19 (36) TAC Xenta 400 I/O modules 3 Technical description Technical data TAC Xenta 451 and 452 Universal inputs (U1–U4): Quantity .......................................................................................... 4A/D-resolution ............................

Page 20 - The TAC Xenta 471 Analog Input module; internal; Restore to default values

20 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 3 Technical description 3.5 The TAC Xenta 471 Analog Input module The module has eight universal analog inputs (U). The analog inputscan independently be used for current input or as voltage inputs. Thecurrent inputs use either ...

Page 21 - Technical data TAC Xenta 471; – as current input with an; The TAC Xenta 491/492 Analog Output module; The modules have eight analog outputs.

TAC AB, 2003-07-01 0-004-7771-2 (GB), 21 (36) TAC Xenta 400 I/O modules 3 Technical description • Network Management Authentication = Off• Pre-emption Timeout = Forever• The inputs will be configured as voltage inputs. Technical data TAC Xenta 471 Universal inputs (U1–U8): Quantity ....................

Page 22 - Restoring to the default values

22 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 3 Technical description Type No. TAC Menta Block type Terminal ref. Override (492) Analog outputs 8 AO - Analog outputs Y1 -Y8 – / Man-Auto Restoring to the default values If you press the Service Pin for seven seconds during th...

Page 23 - Installation; Mounting

TAC AB, 2003-07-01 0-004-7771-2 (GB), 23 (36) TAC Xenta 400 I/O modules 4 Installation 4 Installation 4.1 Mounting The TAC Xenta controllers and I/O modules are designed formounting on a DIN rail inside a cabinet. They can also be mounteddirectly on a wall. In such cases, a wide range of standard en...

Page 24 - Electrical installation; (or other relevant safety standard for example

24 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 4 Installation 4.2 Electrical installation 4.2.1 General considerations Installation is normally treated as category CAT III (IEC 664), whichin principle means permanent connection to a 230 V AC mains supply.For the Xenta 400, t...

Page 25 - Connections; PU

TAC AB, 2003-07-01 0-004-7771-2 (GB), 25 (36) TAC Xenta 400 I/O modules 4 Installation Connections When cabinet mounting is used, jumpers may be used betweenM (measurement neutral) terminal pairs, as shown in the figure belowand on the next page. All G0 points must be connected to protectiveground. ...

Page 26 - TAC Xenta 471 I/O module

26 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 4 Installation When connecting G0 to ground, each TAC Xenta unit must have itsown connection to the ground rail, i.e. jumpers cannot be used for theG0 terminals. Please refer to the figure on the next page. Several units may sha...

Page 28 - Power and Communication

28 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 4 Installation 4.2.3 Cables Power and Communication G and G0 (Power supply): G, min. cross-sectional area ............................................... 0.75 mm²G0 to TAC Xenta, min. cross-sectional area ..........................

Page 30 - not; Commissioning

30 (36), 0-004-7771-2 (GB) TAC AB, 2003-07-01 TAC Xenta 400 I/O modules 4 Installation TAC Xenta 400 I/O modules Terminals type X: Min. cross-sectional area ................................................... 0.25 mm²Max. cable length ....................................................................

Page 31 - Index; Analog Input and Output

TAC AB, 2003-07-01 0-004-7771-2 (GB), 31 (36) TAC Xenta 400 I/O modules Index Index A Analog Input and Output module 18 Analog Input module 20Analog Output module 21 B B1–B4 19 C C1 and C2 28cabinet 25Cables 28Connections 25 D Digital Input and Output module 16 Digital Input module 15DIN rail 23 E e...

Page 33 - You can help to make this manual even better!; TAC AB; I suggest the following improvements:

You can help to make this manual even better! Please help us to make our documentation as good as possible. Use this form to let us know of anyerrors, unclear descriptions or to suggest improvements. Send the form to: Or e-mail it to: TAC AB [email protected] HelpdeskJägershillgatan 18SE-213 75 MALMÖS...