Savin 4700WD - Manuals - manualsarea.com

Page 7 - ENERGY STAR Program; Low Power mode; Clear Modes/Energy Saver; Power mode, see p.25 “Energy Saver Timer”

i ENERGY STAR Program ❖ ❖ ❖ ❖ Low Power mode This product automatically lowers its power consumption 15 minutes afterthe last copying or printing job has been completed. Printing is available inthis mode, but if you use the copier, press the { Clear Modes/Energy Saver } key. • For details about how ...

Page 8 - ii; Specification

ii Specification Recycled paper In accordance with the ENERGY STAR Program, we recommended use of recy-cled paper which is environment friendly. Please contact your sales representa-tive for recommended paper. Low Power mode Power consumption 200Wh or less Default interval 15 minutes Recovery time –...

Page 9 - iii; How to Read this Manual; Symbols; In this manual, the following symbols are used:

iii How to Read this Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result indeath or serious injury when you misuse the machine without following the in-structions under this symbol. Be sure to read the in...

Page 10 - iv; Terms in this Manual; Guide to Option Components

iv Terms in this Manual Guide to Option Components In this manual, the following abbreviations are used.• Roll Holder Unit Type A → Roll holder • 2nd Roll Tray Type A → Lower tray • Stamp Board Type A → Stamp board • Original Tray Type G → Original Tray • Hard Disk Drive Option Type 470 → HDD • Prin...

Page 11 - TABLE OF CONTENTS; Combined Function Operations

v TABLE OF CONTENTS Manuals for This Machine......................................................................... 1 What You Can Do with This Machine ...................................................... 2 Copier Function ............................................................................

Page 13 - Manuals for This Machine

1 Manuals for This Machine This machine has several functions and can be used as a copier, printer, or scan-ner. The manuals for the machine are therefore divided into a manual that de-scribes common operations and functions, and separate manuals for the copier,printer and scanner functions. Please ...

Page 14 - What You Can Do with This Machine; Copier Function

2 What You Can Do with This Machine If you install the options available for this machine, you can further increase itsfunctionality. If you want to add any of the options, please contact your servicerepresentative. Copier Function The machine has all the basic copier functions, plus density adjustm...

Page 15 - Counters; • Copy; Total Counter

3 Counters This keeps a separate count o f thenumber sheets output by the machinef o r t h e v a r i o u s f u n c t i o n s ; C o p i e rfunction and Printer function. Youcan view or print the totals in thesecounters.• Total Counter This is the combined total for thecopier and printer counters. • C...

Page 17 - Operations; Operation Panel; Program

5 1. Combined Function Operations Operation Panel 1. Screen contrast knob Adjusts the brightness of the screen. 2. Indicators These indicators show errors or the statusof the machine. 3. { User Tools/Counter } key Press this key to change the default set-tings and operation conditions to matchyour r...

Page 18 - Start; Note

Combined Function Operations 6 1 11. { Start } key Press to start copying. The default settingis for the originals to be scanned first, andthen copied. You can also use this key toresume an interrupted copy job (RestartC o p y ) o r r e p e a t a c o p y j o b ( R e p e a tCopy). 12. Operation Switc...

Page 19 - Switching between Functions

Switching between Functions 7 1 Switching between Functions You can use this machine not only as a copier, but optionally as a printer or scan-ner machine as well. Command from your computer to switch between func-tions. Note ❒ Depending on the options you have installed, you may not be able to swit...

Page 20 - Using the Machine as a Copier; Switching to Copier Mode; Reference; Interrupting Other Functions to Use Copier Functions; Limitation; Press the; The Interrupt copier screen is displayed.; Set your desired settings, and make the copies.

Combined Function Operations 8 1 Using the Machine as a Copier Switching to Copier Mode When the printer or scanner function is not using, or finished, the copier screento be displayed normally. Reference For details about using the copier functions, see the Copy Reference manual. Interrupting Other...

Page 21 - Using the Machine as a Printer; Switching to Printer Mode; When you send print job from your computer, the job will be printed.; Print the job as you usually do from your computer.

Using the Machine as a Printer 9 1 Using the Machine as a Printer Switching to Printer Mode When you send print job from your computer, the job will be printed. A Print the job as you usually do from your computer. The "Printing..." message is displayed, and printing starts. Reference For de...

Page 22 - Using the Machine as a Scanner; Switching to Scanner Mode; Scan the job as you usually do from your computer.

Combined Function Operations 10 1 Using the Machine as a Scanner Switching to Scanner Mode A Scan the job as you usually do from your computer. The "Scanning..." message is displayed. B Place your originals. C Specify the scan settings from your computer. D Scan the originals from your compu...

Page 25 - Accessing the User Tools (System Settings); Preparation; Saver; The System Settings menu appears.

13 2. User Tools (System Settings) Accessing the User Tools (System Settings) This section is for the key operators in charge of this machine. You can changeor set the machine's default settings. Preparation Any changes you make with the User Tools remain in effect even if the mainpower switch or th...

Page 26 - OK; Cancel; Exiting from the User Tools; Exit

User Tools (System Settings) 14 2 A screen is displayed describing the setting for item you selected. Reference ⇒ p.15 “User Tools Menu (System Settings)” D Change the settings by following the instructions on the screen, and thenpress the [ OK ] key. Note ❒ Use the { · } key to enter a decimal poin...

Page 28 - Fusing Adjustment: Paper Tray

User Tools (System Settings) 16 2 Settings You Can Change with the User Tools For details on how to display the settings, see p.13 “Accessing the User Tools(System Settings)”. General Features 1/3 ❖ ❖ ❖ ❖ Fusing Adjustment: Paper Tray Specifies the characteristics of the paper roll in the paper tray...

Page 29 - Bypass Tray Paper Type; Original Size Detect; • Inch version; Metric version; • For A series; Inch version; When switching Engineering

Settings You Can Change with the User Tools 17 2 ❒ When Translucent Paper modes 1 or 2 are selected, and you change the pa-per type from Plain or Film to Translucent Paper, it may take longer for themachine to get ready for copying. (Up to two minutes). ❖ ❖ ❖ ❖ Bypass Tray Paper Type Specifies the t...

Page 30 - Tray Paper Size; • A Series

User Tools (System Settings) 18 2 Reference See "User Auto R/E Original Size Detect" in the Copy Reference manual.See "User Auto Reduce/Enlarge" in the Copy Reference manual. ❖ ❖ ❖ ❖ Tray Paper Size Specifies the size of the paper roll in the paper tray separately.• Metric version • ...

Page 31 - Paper Volume Setting; Tray Paper Type

Settings You Can Change with the User Tools 19 2 Note ❒ Default: • Metric version: • Paper Roll 1: 841mm• Paper Roll 2: 841mm• Paper Roll 3: 594mm • Inch version: • Paper Roll 1: 34"• Paper Roll 2: 17"• Paper Roll 3: 22" ❖ ❖ ❖ ❖ Paper Volume Setting Specifies how the paper volume should ...

Page 32 - Original Output Tray; Clear; Copy Output Tray; Paper Edge Hold; On

User Tools (System Settings) 20 2 ❖ ❖ ❖ ❖ Original Output Tray Specifies the original output to use when the power is turned on, or the { Clear Modes/Energy Saver } key is pressed. • Upper• Rear Straight: Edge Hold• Rear Straight: Release• Rear (Document Roller) Note ❒ Default: Upper ❒ Select the ou...

Page 33 - Original Feed Delay 1; Original Feed Delay 2; Function Reset Timer; System Reset Timer

Settings You Can Change with the User Tools 21 2 General Features 2/3 ❖ ❖ ❖ ❖ Original Feed Delay 1 Specifies the length of the delay before an original is fed into the machine afterit has been set. If the originals are frequently fed at a slant, or you are usingspecial originals, set the delay to a...

Page 34 - Fine Magnification: Copier

User Tools (System Settings) 22 2 ❖ ❖ ❖ ❖ Fine Magnification: Copier Depending on the type of paper, and on the effects of humid or hot condi-tions, the copy paper can expand or shrink slightly. This can mean that thesize of the copy and the original do not match, If this happens, you can specifythe...

Page 35 - Auto Paper Roll Switching

Settings You Can Change with the User Tools 23 2 ❖ ❖ ❖ ❖ Auto Paper Roll Switching The machine can automatically switch to another paper tray with the samepaper size and paper type, if available, when the paper from one paper trayruns out during copying.This setting specifies whether or not to autom...

Page 36 - Panel Tone; Ready Tone; Copy Count Display; Up; key, the display counts upwards, if you press the; Down; Panel Off Level

User Tools (System Settings) 24 2 General Features 3/3 ❖ ❖ ❖ ❖ Panel Tone Specifies whether or not the machine should emit a tone when the keys on thepanel are pressed.• On• Off Note ❒ Default: On ❖ ❖ ❖ ❖ Ready Tone Specifies whether or not the machine should emit a tone when the "Ready"mess...

Page 37 - Panel Off Timer; Energy Saver Timer; Weekly Output Volume; Date; Set the date for the machine's internal clock.; Time; Set the time for the machine's internal clock.

Settings You Can Change with the User Tools 25 2 ❖ ❖ ❖ ❖ Panel Off Timer After copying, or no other key operations, have been performed the machineswitches to standby mode after a specified period.• 0, 10 – 999 sec.• 60 sec. Note ❒ Default: 60 seconds ❒ The time can be set to 0 and from 10 to 999 se...

Page 38 - Key Operator Access; User Code Access; Key Counter Access; Copier; Set Key Card; Copier; Auto Off Timer

User Tools (System Settings) 26 2 Key Operator Tools If the access code function has been set, you cannot access the key operator func-tion unless you enter the access code (up to 8 digits). ❖ ❖ ❖ ❖ Key Operator Access The encrypted code used to access the management settings is called the ac-cess c...

Page 39 - Optional Hard Disk

Settings You Can Change with the User Tools 27 2 ❖ ❖ ❖ ❖ Optional Hard Disk When the optional hard disk is not installed, this should be left set to not in-stalled.When the optional hard disk is installed, if the hard disk should fail, you canstill use the machine temporarily if you turn the hard di...

Page 40 - INDEX

28 INDEX A Accessing the User Tools (System Settings) , 13 Auto Off Timer , 26 Auto Paper Roll Switching , 23 B Bypass Tray Paper Type , 17 C Clear Modes/Energy Saver , 5 Clear/Stop , 5 Combined Function Operations , 5 Copy Count Display , 24 Copy Output Tray , 20 Counters , 3 D Date , 25 Date/Time ...

Page 42 - MEMO

30 EE GB B010 MEMO DolphinGB-Syst-F_V4_FM.book Page 30 Wednesday, May 2, 2001 1:19 PM