Samsung WW90T4020CT - Manuals

Engl ish English   5 Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:1. This appliance is not to be used by persons (including children) with reduced physical, sensory o...

Engl ish Safety information English 6 6. For appliances with ventilation openings in the base, a carpet must not obstruct the openings. 7. For use in Europe : Children of less than 3 years should be kept away unless continuously supervised. 8. CAUTION : In order to avoid a hazard due to inadvertent ...

Engl ish Safety information English 8 Following the repair by a non-authorized service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which ...

Engl ish English   9 Do not open the washing machine door by force while it is operating (high-temperature washing/drying/spinning).• Water flowing out of the washing machine may result in burns or cause the floor to be slippery. This may result in injury. • Opening the door by force may result in d...

Engl ish Safety information English 12 Do not use water from water cooling/heating devices.• This may result in problems with the washing machine.Do not use natural hand-washing soap for the washing machine.• If it hardens and accumulates inside the washing machine, it may result in problems with th...

Engl ish English   13 Instructions about the WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories ...

Engl ish English 14 Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or the pa...

Engl ish Installation English 16 Installation requirements Electrical supply and grounding • AC 220-240 V / 50 Hz fuse or circuit breaker is required. • Use an individual branch circuit specific to the washing machine. To ensure proper grounding, the washing machine comes with a power cord featuring...

Engl ish English   17 Flooring For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces are not a good resistance to vibrations and may cause the washing machine...

Engl ish Installation English 18 Step-by-step installation STEP 1  Select a location Location requirements:• Solid, level surface without carpeting or flooring that may obstruct ventilation• Away from direct sunlight• Adequate room for ventilation and wiring• The ambient temperature is always higher...

Engl ish English   21 STEP 3  Adjust the levelling feet 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner. CAUTION ...

Engl ish Installation English 22 STEP 4  Connect the water hose The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose. Connecting to a threaded water tap 1. Connect the water hose to the water tap, and then turn the connector cl...

Engl ish English   25 Aqua hose (applicable models only) A The aqua hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak. NOTE The end of the aqua stop hose must be fitted to the water tap and not the machine. STEP 5  Positi...

Engl ish English   27 STEP 6  Power on Plug the power cord into a wall socket that is correctly rated, grounded, and protected by a fuse or circuit breaker. Then, press Power to turn on the washing machine. A NOTE Door latch (lever) (A) is originally designed to be loose a little, because it may mak...

Engl ish English 28 Before you start NOTE Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum. Initial settings Run Calibration (recommended) Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty b...

Engl ish English   29 STEP 2  Empty pockets Empty all the pockets of your laundry items • Metal objects such as coins, pins, and buckles on clothing may damage other laundry items as well as the drum. Turn clothing with buttons and embroideries inside out • If pants or jacket zippers are open while ...

Engl ish Before you start English 32 Detergent recommendation The recommendations apply to the temperature ranges given in the cycle chart.  Recommended  Liquid detergent only – Not recommended  Powder detergent only Cycle Detergent Temp. (°C) Universal Delicates and woollens Specialist ECO 40-60...

Engl ish English   33 Detergent drawer guidelines The washing machine provides a three-compartment dispenser: the left compartment for the main wash, the centre for fabric softeners, and the right for the preliminary wash. A 1. Prewash compartment : Apply prewash detergent or starch. 2. Main-wash co...

Engl ish Before you start English 34 To apply washing agents to the detergent drawer 1. Slide open the detergent drawer. 2. Apply laundry detergent to the main-wash compartment as instructed or recommended by the manufacturer. To use liquid detergent, see page 35 . A 3. Apply fabric softener to the ...

Engl ish English   35 CAUTION • Do not apply powder detergent to the liquid detergent guide. • Concentrated fabric softener must be diluted with water before applied. • Do not apply main-wash detergent to the softener compartment . To use liquid detergent (applicable models only) A First insert the ...

Engl ish English 36 Operations Control panel AddWash 01 02 03 04 05 06 07 08 09 Non AddWash 01 02 03 04 05 06 07 08 09 01 Cycle Selector Turn the dial to select a cycle. 02 Display The display shows current cycle information and estimated time remaining, or an information code when a problem occurs....

Engl ish English   37 05 Options Press to select an option from Intensive, Prewash, and Rinse+. Press again to deselect. 06 Delay End Delay End lets you set the end time of the current cycle. Based on your settings, the start time of the cycle will be determined by the machine’s internal logic. For ...

Engl ish Operations English 38 Cycle overview Standard cycles Cycle Description Max load (kg) 9 kg 8 kg 7 kg ECO 40-60 • For cleaning normally soiled cotton items which are declared to be washable at 40 °C or 60 °C, together in the same cycle. This cycle is used to assess the compliance with the EU ...

Engl ish Operations English 40 Options Option Description Rinse+ • Press this button to add additional rinse cycles. Prewash • This will add a preliminary washing cycle before the main wash cycle. Intensive • For badly soiled laundry. The operation time for each cycle is longer than normal. Delay En...

Engl ish English   41 Special features AddWash (applicable models only) 1. Press Start/Pause to stop operation. 2. Press the upper area of the AddWash Door until you hear a clicking sound to unlock. Pull the handle of the AddWash Door to open. 3. Open the AddWash Door and put additional laundry or s...

Engl ish Operations English 42 • When the AddWash Door closes, the door seals up and no water can leak. However, you may encounter what appears to be water leak around the door - some residual water remaining around the AddWash Door may form water drops. This is normal. • Neither the main door or th...

Engl ish English   43 Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. Drum clean Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water between 60 °C and 70 °C, and it also removes accumul...

Engl ish Maintenance English 44 Smart Check To enable this function, you must first download the Samsung Smart Washer app at the Play Store or the App Store, and install it on a mobile device featuring a camera function.The Smart Check function has been optimised for Galaxy & iPhone series (appl...

Engl ish English   45 Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. A 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover (A) to open. B 3. Put an empty, spacious contain...

Engl ish Maintenance English 46 Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. AddWash Door (applicable models only) A 1. Open the AddWash Door. 2. Use a wet cloth to clean the AddWash Door. - Do not use c...

Engl ish English   47 Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord. 2. Close the water tap. 3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to prevent wat...

Engl ish Maintenance English 48 Debris filter Clean the debris filter bi-monthly to prevent clogging. A clogged debris filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum. See the “ Emergency drain ” section. 3...

Engl ish English   49 Detergent drawer A 1. While holding down the release lever (A) on the inner of the drawer, slide open the drawer. 2. Remove the release lever and the liquid detergent guide from the drawer. 3. Clean the drawer components in flowing water using a soft brush. 4. Clean the drawer ...

Engl ish Maintenance English 50 Recovery from freezing The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4. Pour...

Engl ish English   51 Troubleshooting Checkpoints If you encounter a problem with the washing machine, first check the table below and try the suggestions. Problem Action Does not start. • Make sure the washing machine is plugged in.• Make sure the door is properly closed.• Make sure the water taps ...

Engl ish English   55 Information codes If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action 4C Water is not supplied.• Make sure the water taps are open.• Make sure the water hoses are not clogged.• Make s...

Engl ish English 58 Specifications Fabric care chart The following symbols provide garment care direction. The Clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domesti...

Engl ish English   59 Ironing Iron at maximum sole plate temperature of 200 °C.Iron at maximum sole plate temperature of 150 °C.Iron at maximum sole plate temperature of 110 °C. Caution when using steam irons (work without steam). Do not iron. NOTE The dots indicate the temperature ranges for ironin...

Engl ish Specifications English 60 Protecting the environment • This appliance is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the li...

Engl ish English   63 EPREL information To access the EPREL registration of the model : 1. Go to https://eprel.ec.europa.eu 2. Get the model identifier from the energy label of the product and type it in the search box 3. Energy Labelling information of the model is shown * You can directly access t...

2 _ Safety Instructions WARNING WHILE SERVICING • Check if the power plug and outlet are damaged, flattened, cut or otherwise degraded. 4 If faulty, replace it immediately. Failing to do so may result in electric shock or fire. • Completely remove any dust or foreign material from the housing, wirin...

Safety Instructions _ 3 CAUTION BEFORE SERVICING • Do not sprinkle water onto the washing machine directly when cleaning it. 4 This may result in electric shock or fire, and may shorten the product lifetime. • Do not place any containers with water or any other liquid on the washing machine 4 If the...

Features and Specifications _ 4 2. FEATURES AND SPECIFICATIONS 2-1. SPECIFICATIONS MODEL WW90T654DLH WW10T754DBH WW90T986DSH WW90T684DLH WW90T534DAW WW90T4540AX Model name Front loading washing machine Dimensions (mm) 600x850x550 600x850x600 600x850x600 600x850x550 600x850x550 600x850x550 Water pres...

5 _ Features and Specifications 2-2. COMPARING SPECIFICATIONS WITH EXISTING MODELS Model name WW90T654DLH WW10T754DBH WW90T986DSH WW90T684DLH WW90T534DAW WW90T4540AX WW6500K Image Capacity 9 10.5 9 9 9 9 9 Main Spec Drum Volume 63 70.5 65.9 63 63 63 63 Max RPM 1400 1400 1600 1400 1400 1400 1400 Moto...

Features and Specifications _ 6 2-3. OPTIONS SPECIFICATIONS NO Unit Part Code Figure Description Qty 1 Bolt Spanner DC60-40146A To remove the shipping bolts To adjust the leveling leg 1 2 Assy Hose Water DC97-17845A (Cold) DC97-17845B (Hot) To setup water supply. Cold only 1, Cold+Hot 2( ★ ) 3 Hose ...

Disassembly and Reassembly _ 7 3. DISASSEMBLY AND REASSEMBLY 3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY Tool Type Remarks Box driver 10mm Heater(1),Tub(12), Fixer screw(5), Motor(2), Balance(9) 13mm Shock Absorber (2 holes each in left/right), Damper(2), Damper(friction 2) 19mm Pulley(1) Double-ended...

8 _ Disassembly and Reassembly 3-2. STANDARD DISASSEMBLY DRAWINGS ► This is a standard disassembly diagram and may differ from the actual product. Use this material as a reference when disassembling and reassembling the product.  Disassembly Part Figure Description Assy Cover Top 1. Remove 2 screws...

Disassembly and Reassembly _ 9  Reassembly Part Figure Description Assy Drawer 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Make sure to fit the rail when reassembling the Assy drawer. 3. Put the drawer in the right direction.

10 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Pull to open the Drawer by hand. 2. While holding down the release lever inside the drawer (red box) , slide open the drawer. 3. Disassemble the Cover Drawer by hand. 4. Pull up the Cap Rinse to remo...

Disassembly and Reassembly _ 11  Reassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Assemble the Cover Drawer by hand. 3. Make sure to fit the rail when reassembling the Assy drawer. 4. Place the drawer in the right...

12 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (Simple) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) ...

Disassembly and Reassembly _ 13  Reassembly Part Figure Description Assy Panel Control (Simple) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Be careful not to break the hook. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the ...

14 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (LED) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) scr...

Disassembly and Reassembly _ 15  Reassembly Part Figure Description Assy Panel Control (LED) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the hook of housing drawer and aseemble s...

16 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Housing-Drawer Before you start, disassemble Assy Cover Top, Assy Panel Control.1. Remove 4 screws to disassemble frame plate- up using (+) screw driver. 2. Remove the Band-ring. (2ea) Be careful not to break the hose.

Disassembly and Reassembly _ 17 Part Figure Description Assy Housing-Drawer 3. Separate the water valve hose with long nose plier. 4. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, disassemble Water Valve. Be careful not to break the hook.

18 _ Disassembly and Reassembly Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Disassemble the 6 screws holding the pump with (+) screw driver. To fully separate, disassemble Water Valve. 2. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, d...

Disassembly and Reassembly _ 19 Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. 2. Assemble the 6 screws holding the pump with (+) screw driver.

20 _ Disassembly and Reassembly  Reassembly Part Figure Description Assy Housing-Drawer 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. Be careful not to break the hose. 2. Assemble the water valve hose with long nose plier. Be careful not to break the hook. Make sur...

Disassembly and Reassembly _ 21 Part Figure Description Assy Housing-Drawer 3. Assemble the Band rings. (2ea) Make sure to insert the hoses and assemble the clamp, band rings correctly. There’re risks of leakage or poor performance when it’s misassembled. 4. Remove 4 screws to disassemble frame plat...

22 _ Disassembly and Reassembly  Disassembly Part Figure Description Frame Front Before you start, disassemble Assy Cover Top, Assy Panel Control. Be careful not to tear up the diaphragm. 1. Using long nose pliers, pick up one of the rings on Wire-Diaphragm which connect the spring and the wire end...

Disassembly and Reassembly _ 23 Part Figure Description Frame Front 6. Remove cover filter by hand. 7. Press the hook to remove Guide cover filter using (-) screw driver. Be careful not to break the hook. 8. Pull the Guide filter towards you. 9. Lift Frame front up to disassemble. Cover-Back Unfaste...

24 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Door Before you start, disassemble Assy Cover Top, Assy Panel Control and Frame Front. 1. Remove the wire by disassembling the 3 hooks using long nose plier. 2. Disassemble the terminal and remove the holders using long nose ...

Disassembly and Reassembly _ 25  Reassembly Part Figure Description Assy Door BACK SIDE FRONT SIDE 1. Put the terminal through the biggest hole and assemble 3 hooks as shown in the pictures. 2. Assemble the door with Frame Front by fitting the two hooks and assemble 2 screws holding the Assy door w...

26 _ Disassembly and Reassembly  Disassembly Part Figure Description Door-Lock S/W Before you start, disassemble Assy Cover Top and Assy Panel Control.1. Open the Door. Remove the Wire Diaphragm and remove the Frame Front. 2. Remove 2 screws with (+) screw driver. 3. Remove Cover Door Switch by gen...

Disassembly and Reassembly _ 27  Reassembly Part Figure Description Door-Lock S/W 1. Assemble the terminals. (2ea) Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the Cover Door Switch by gently pushing the red box part with hand. Make sure the Wire harness are not gett...

28 _ Disassembly and Reassembly  Disassembly Part Figure Description Diaphragm Before you start, remove cover top, Assy Drawer, Assy Panel Control and Frame Front.1. Remove hose and clamp with long nose plier, and unfasten the screw with (+) screw driver. 2. Pull diaphragm towards you. Be careful n...

Disassembly and Reassembly _ 29  Reassembly Part Figure Description Diaphragm 1. Assemble the Diaphragm with tub by hand. Diaphragm and tub has triangle part make sure to fit them correctly. 2. Assemble hose and clamp with long nose plier, and fasten the screw with (+) screw driver.

Wiring Diagram _ 35 5. WIRING DIAGRAM 5-1. WIRING DIAGRAM (SIMPLE) ► This Document can not be used without Samsung’s authorization. n REFERENCE INFORMATION BLK BLACK BLU BLUE GRN GREEN GRY GRAY NTR NATURAL ORG ORANGE PNK PINK RED RED SKYBLU SKYBLUE VIO VIOLET WHT WHITE YEL YELLOW

38 _ Reference 6. REFERENCE 6-1. WW6000T PROJECT NAME ► Door 10-Digit DOOR DESIGN DOOR COLOR DECO COLOR S Best Black D.silver B Better Black Black W Better Black White L Good Black D.silver H Good White D.silver A Basic Black Black T Basic White White C Old Basic Black - E Old Basic White - ► Region...