Samsung WW70A6S28AE - Manuals

English English   5 Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:1. This appliance is not to be used by persons (including children) with reduced physical, sensory or...

English Safety information English 6 9. This appliance is intended to be used in household only and it is not intended to be used such as: ‒ staff kitchen areas in shops, offices and other working environments; ‒ farm houses; ‒ by clients in hotels, motels and other residential type environments; ‒ ...

English English   7 Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight or water (rain drops).Do not install this appliance in a location exposed to low temperatures.• Frost may cause the tubes to burst.Do not install this appliance in a loca...

English Safety information English 8 Critical usage warnings WARNING If the appliance is flooded, turn off the water & power supplies immediately and contact your nearest service centre.• Do not touch the power plug with wet hands.• Failure to do so may result in electric shock.If the appliance ...

English English   9 Do not attempt to repair, disassemble, or modify the appliance yourself.• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.• When the appliance needs to be repaired or reinstalled, contact your nearest service centre.• Failure to do so may result in...

English Safety information English 12 Sort the laundry by colour on the basis of its colorfastness and select the recommended cycle, water temperature and additional functions.• This may result in discolouration or fabric damage.Take care that children’s fingers are not caught in the door when you c...

English English   13 Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or the p...

English English   15 Installation requirements Electrical supply and grounding • Use an individual branch circuit specific to the washing machine. To ensure proper grounding, the washing machine comes with a power cord featuring a three-prong grounding plug for use in a properly installed and ground...

English Installation English 16 Flooring For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not resist vibration well and may cause the washing machine ...

English English   17 Step-by-step installation STEP 1  Select a location Location requirements:• Solid, level surface without carpeting or flooring that may obstruct ventilation• Away from direct sunlight• Adequate room for ventilation and wiring• The ambient temperature is always higher than the fr...

English Installation English 20 STEP 3  Adjust the levelling feet 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner...

English English   21 STEP 4  Connect the water hose The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose. Connecting to a threaded water tap 1. Connect the water hose to the water tap, and then turn it to the right to tighten. ...

English Installation English 22 Connecting to a non-threaded water tap A B 1. Remove the adaptor (A) from the water hose (B) . 2. Use a Phillips screwdriver to loosen four screws on the adaptor. C 3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*). C 4. Insert the ...

English English   25 STEP 5  Position the drain hose The drain hose can be positioned in three ways: A Over the edge of a wash basin The drain hose must be placed between 60 cm and 90 cm (*) above from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A) . Sec...

English Installation English 26 In a sink drain pipe branch The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.(*) : 60 cm CAUTION Remove the lid on the sink drain pipe branch before connecting the drain pipe to it. STEP 6  Power on Plu...

English English   27 Before you start NOTE Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum. Initial setup • When you turn on the washing machine for the first time, the screen shows the initial setup process. Follow the on-screen instruc...

English Before you start English 28 Laundry guidelines STEP 1  Sort Sort the laundry according to these criteria: • Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon.• colour: Separate whites from colours.• Size: Mixing different sized items together in the...

English Before you start English 30 Laundry capsules To get the best results from using laundry capsules, please follow these instructions. 1. Put the capsule in the bottom of the empty drum towards the rear. 2. Put the laundry in the drum on top of the capsule. CAUTION For cycles using cold water o...

English English   31 Detergent recommendation The recommendations apply to the temperature ranges given in the cycle chart.  Recommended  Liquid detergent only – Not recommended  Powder detergent only Cycle Detergent Temp. (°C) Universal Delicates and woollens Specialist Eco 40-60  - - 40~60 Cot...

English Before you start English 32 Detergent drawer guidelines The washing machine provides a three-compartment dispenser: the left compartment for the main wash, the front-right for fabric softeners, and the rear-right for the preliminary wash. A 1. Prewash compartment : Apply prewash detergent. 2...

English English   33 To apply washing agents to the manual dispenser A 1. Slide open the detergent drawer. 2. Apply laundry detergent to the main-wash compartment as instructed or recommended by the manufacturer. To use liquid detergent, see page 34 . Do not exceed the max line (A) when adding deter...

English English   35 Operations NOTE The cycle and function names that appeared in this manual may differ from your product. Control panel 01 03 02 04 10 05 06 07 08 09 01 Power Tap to turn the washing machine on or off.• If you do not manipulate the control panel for 10 minutes after the washing ma...

English Operations English 36 10 Smart Control Tap to activate or deactivate the Smart Control function.Tap and hold to enter pairing mode to connect to the SmartThings app.• When the Smart Control function is activated, you can control your washing machine remotely using the SmartThings app on your...

English English   37 Cycle overview Cycle Description Max load (kg) Eco 40-60 • For cleaning normally soiled cotton items which are declared to be washable at 40 °C or 60 °C, together in the same cycle. This cycle is used to assess the compliance with the EU Ecodesign legislation. • This cycle is se...

English Operations English 40 Additional functions Using Additional Functions 1. Tap . 2. Turn the Navigation dial to select the desired additional function. 3. Tap to change the selected function’s settings or start the function. NOTE • To return to the main screen, tap again or turn the Navigation...

English English   41 Bubble Soak This function helps remove a wide variety of stubborn stains. With Bubble Soak selected, laundry is thoroughly soaked in water bubbles for effective washing. 1. Select a cycle and change the cycle settings as necessary. 2. Tap . 3. Turn the Navigation dial to select ...

English Operations English 42 Delay End You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle and change the cycle settings as ...

English English   43 System functions Using System Functions 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial and select the desired system function, and then tap . 3. Tap to change the selected function’s settings or start the function. NOTE To return to the main screen, tap again or turn...

English Operations English 44 Wi-Fi You can turn the washing machine's Wi-Fi on or off. 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial to select Wi-Fi , and then tap . 3. Tap to select On or Off . - The washing machine's Wi-Fi is off as a factory default setting. However, the washing mac...

English English   45 Special features Smart control (applicable models only) You can connect to the SmartThings app and control your washing machine remotely. Connecting your washing machine1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS). 2. Tap to turn on t...

English Operations English 46 NOTE • The washing machine switches to standby power saving mode when operation is paused even if the machine is not connected to the SmartThings app. • In some circumstances, only the Door Lock icon may be illuminated. SmartThings Wi-Fi connection On your smartphone or...

English English   47 Open Source Announcement The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by contacting our support team via http://opensource.samsung.co...

English English   49 Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. A A 1. Power off and unplug the washing machine from the electrical outlet. 2. Open the filter cover (A) . - TYPE 1: Gently press the top area of the filter cover (A) to op...

English Maintenance English 50 Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power...

English English   51 Debris filter It is advisable to clean the debris filter every 2 months to prevent its clogging. A clogged debris filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum. See the Emergency drai...

English Maintenance English 52 Detergent drawer A 1. While holding down the release lever (A) inside the drawer, slide open the drawer. 2. Remove the release lever and the liquid detergent guide from the drawer. 3. Clean the drawer components in flowing water using a soft brush. 4. Clean the drawer ...

English English   53 Defrosting your washing machine The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4. Pour w...

English English 54 Troubleshooting If there is any problem, check the information message on the LCD screen and follow the on-screen instructions.If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the table below a...

English Troubleshooting English 58 Information codes If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action Check drainage Water is not draining.• Make sure the drain hose is not frozen or clogged.• Make sure...

English English 60 Specifications Fabric care chart The following symbols provide garment care direction. The Clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic...

English English   61 Ironing Iron at maximum sole plate temperature of 200 °C.Iron at maximum sole plate temperature of 150 °C.Iron at maximum sole plate temperature of 110 °C. Caution when using steam irons (work without steam).Do not iron. NOTE The dots indicate the temperature ranges for ironing ...

English Specifications English 62 Spare parts guarantee We guarantee that the following spare parts will be available to professional repairers and end-users for a minimum period of 10 years after placing the last unit of the model on the market.• Door, door hinges and seals, other seals, door locki...

English English   63 Type Front loading washing machine Model name WW80A**2*** WW70A**2*** Dimensions A (Width) 600 mm B (Height) 850 mm C (Depth) 450 mm D 510 mm E 980 mm Water pressure 50-1000 kPa Net weight 56.0 kg (W********P*) 55.0 kg (W********A*, W********B*, W********T*, W********W*) Maximum...

English Specifications English 64 Indicative information (According to EU 2019/2023) Model Cycles Capacity (kg) Program Time (HH:MM) Energy Consumption (kWh/Cycle) Water Consumption (L/cycle) Maximum Temperature (°C) Remaining Moisture Content (%) Spinning Speed (RPM) WW80A**2*** Eco 40-60 8.0 3:38 ...

English English   65 Contact information QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/support IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support GERMANY 06196 77 555 77 www.samsung.com/de/support FRANCE 01 48 63 00 00 www.samsung.com/fr/support SPA...

2 _ Safety Instructions WARNING WHILE SERVICING • Check if the power plug and outlet are damaged, flattened, cut or otherwise degraded. 4 If faulty, replace it immediately. Failing to do so may result in electric shock or fire. • Completely remove any dust or foreign material from the housing, wirin...

Safety Instructions _ 3 CAUTION BEFORE SERVICING • Do not sprinkle water onto the washing machine directly when cleaning it. 4 This may result in electric shock or fire, and may shorten the product lifetime. • Do not place any containers with water or any other liquid on the washing machine 4 If the...

4 _ Safety Instructions CAUTION AFTER SERVICING • Ensure that all components are reassembled correctly and are safe before connecting the appliance to the mains supplies. 4 Ensure all electrical safety tests are carried out, before and after any work is carried out on the appliance. • To comply with...

Features and Specifications _ 5 2. FEATURES AND SPECIFICATIONS 2-1. CONCEPT ■ COMMON FEATURES Features Description COTTON • For cotton, bed linens, table linens, underwear, towels, or shirts. The washing time and the rinse count are automatically adjusted according to the load. • For cleaning lightl...

6 _ Features and Specifications Features Description Baby Care • Featuring a high-temperature wash and extra rinses to help remove the remaining detergent effectively. Silent Wash • For reducing operating noise and vibration. Mixed Load(applicable models only) • For mixed load consisting of cotton a...

Features and Specifications _ 7 2-2. SPECIFICATIONS MODEL WW70A6S28 WW80A6S28 WW70AFS28 WW80AFS28 WW70A6S23 WW80A6S24 Model name Front loading washing machine Dimensions (mm) 600x850x450 Water pressure 50kPa-800kPa Wash and spin capacity 7.0 kg 8.0 kg 7.0 kg 8.0 kg 7.0 kg 8.0 kg Power consumption Wa...

8 _ Features and Specifications 2-3. COMPARING SPECIFICATIONS WITH EXISTING MODELS Project (PLM) WW6100A WW6100A WW6100A WW6100A Model Name WW80AFS28** WW80A6S28** WW80A6S24** WW70A6S23** Drum Volume (ℓ) 48 48 48 41 Porthole Size (mm) 311 311 311 311 Dooropening angle 125 125 125 125 Region CIS CIS ...

Features and Specifications _ 9 Project (PLM) WW6100A WW6100A WW6100A WW6100A Model Name WW80A6S28** WW70AFS28** WW70A6S28** WW80A6S24** Drum Volume (ℓ) 48 41 41 48 Porthole Size (mm) 311 311 311 311 Dooropening angle 125 125 125 125 Region Europe CIS CIS Europe Regulation NEW EU IEC/ERP IEC/ERP NEW...

Features and Specifications _ 10 2-4. OPTIONS SPECIFICATIONS NO Unit Part Code Figure Description Qty 1 Bolt Spanner DC60-40146A To remove the shipping bolts To adjust the leveling leg 1 2 Assy Hose Water DC97-17845A (Cold) DC97-17845B (Hot) To setup water supply. Cold only 1, Cold+Hot 2( ★ ) 3 Hose...

Disassembly and Reassembly _ 11 3. DISASSEMBLY AND REASSEMBLY 3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY Tool Type Remarks Box driver 10mm Heater(1),Tub(12), Fixer screw(5), Motor(2), Balance(9) 13mm Shock Absorber (2 holes each in left/right), Damper(2), Damper(friction 2) 19mm Pulley(1) Double-ende...

12 _ Disassembly and Reassembly 3-2. STANDARD DISASSEMBLY DRAWINGS ► This is a standard disassembly diagram and may differ from the actual product. Use this material as a reference when disassembling and reassembling the product.  Disassembly Part Figure Description Assy Cover Top 1. Remove 2 screw...

Disassembly and Reassembly _ 13  Reassembly Part Figure Description Assy Drawer 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Make sure to fit the rail when reassembling the Assy drawer. 3. Put the drawer in the right direction.

14 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (Simple) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) ...

Disassembly and Reassembly _ 15 Part Figure Description Assy Panel Control (Simple) 6. Disassemble the blue part hook first by hand and remove red part hooks by (-) screw driver to remove the PBA for repair / replacement. FRONT SIDE BACK SIDE 7. Disassemble Knob Encoder by removing green hooks using...

16 _ Disassembly and Reassembly  Reassembly Part Figure Description Assy Panel Control (Simple) 1. Assemble the red part hooks and blue part hook by hand. The blue part hook will show you the right directionality. Be careful not to break the hook. 2. The direction of the PBA is shown by blue box. B...

Disassembly and Reassembly _ 17 Part Figure Description Assy Panel Control (Simple) 4. Connect the terminal by hand. Take a look at the hook and put it in the right place. Be careful not to break the hook. Make sure the Wire harness are not getting stuck in other parts. 5. Assemble PCB to both hooks...

18 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Housing-Drawer Before you start, disassemble Assy Cover Top, Assy Panel Control.1. Remove 4 screws to disassemble frame plate- up using (+) screw driver. 2. Remove the Band-ring. (2ea) Be careful not to break the hose. 3. Sep...

Disassembly and Reassembly _ 19 Part Figure Description Assy Housing-Drawer 4. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, disassemble Water Valve. Be careful not to break the hook.

20 _ Disassembly and Reassembly  Reassembly Part Figure Description Assy Housing-Drawer 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. Be careful not to break the hose. 2. Assemble the water valve hose with long nose plier. Be careful not to break the hook. Make sur...

Disassembly and Reassembly _ 21 Part Figure Description Assy Housing-Drawer 3. Assemble the Band rings. (2ea) Make sure to insert the hoses and assemble the clamp, band rings correctly. There’re risks of leakage or poor performance when it’s misassembled. 4. Remove 4 screws to disassemble frame plat...

22 _ Disassembly and Reassembly  Disassembly Part Figure Description Water Valve 1. Separate the Assy Cover Top. 2. Separate the 3 connectors and clamps by hand and remove 3 hoses with long nose pliers. 3. Remove 2 screws holding the water supply valve using (+) screw driver.  Reassembly Part Figu...

Disassembly and Reassembly _ 23  Disassembly Part Figure Description Frame Front Before you start, disassemble Assy Cover Top, Assy Panel Control. Be careful not to tear up the diaphragm. 1. Using long nose pliers, pick up one of the rings on Wire-Diaphragm which connect the spring and the wire end...

24 _ Disassembly and Reassembly Part Figure Description Frame Front 6. Remove cover filter by hand. 7. Press the hook to remove Guide cover filter using (-) screw driver. Be careful not to break the hook. 8. Pull the Guide filter towards you. 9. Lift Frame front up to disassemble. Cover-Back Unfaste...

Disassembly and Reassembly _ 25  Disassembly Part Figure Description Belt Before you start, disassemble Cover-Back. 1. Separate the belt by pulling the belt towards your body and slowly rotate the pulley. Be careful not to get your finger pinched.  Reassembly Part Figure Description Belt 1. Assemb...

26 _ Disassembly and Reassembly  Disassembly Part Figure Description Leakage Sensor (Option) - Before you start, disassemble the Cover-Back.1. Disconnect two wire connectors. 2. Remove 4 screws at the bottom of set using (+) screw driver. 3. Remove 2 screws using (+) screw driver.

Disassembly and Reassembly _ 27  Disassembly Part Figure Description Water Level Sensor Separate the Assy Cover Top. 1. Disconnect the wire and hose between the PRESSURE HOSE and the water level sensor for repair / replacement. 2. Push the clip of the water level sensor from one side of the frame a...

28 _ Disassembly and Reassembly  Reassembly Part Figure Description Water Level Sensor 1. Connect the wire and hose between the PRESSURE HOSE and the water level sensor. 2. Push the clip of the water level sensor to fit the hole located on the right side of the frame. 3. Assemble the terminal with ...

Disassembly and Reassembly _ 29  Disassembly Part Figure Description Drain Pump Before you start, disassemble Assy Cover Top, Assy Panel Control and Frame Front. The pump is located in the blue box.

30 _ Disassembly and Reassembly Part Figure Description Drain Pump 1. Remove the remaining water through the drainage hose. Place a bowl under the drainage hose to catch any water that may flow out. 2. Remove 2 screws holding the drain pump using (+) screw driver. FRONT BACK 3. Remove the cover on t...

Disassembly and Reassembly _ 31  Reassembly Part Figure Description Drain Pump 1. Assemble the pump in the right position as shown in the picture, pull the drainage hose towards you. Be careful not to rip the drainage hose. 2. Assemble 2 screws holding the drain pump using (+) screw driver. 3. Asse...

32 _ Disassembly and Reassembly  Disassembly Part Figure Description Door-Lock S/W 1. Remove the 2 screws holding the Door Hinge and separate the door. 2. Remove the 7 screws holding the Holder Glass, separate the Holder Glass and replace the hinge.

Disassembly and Reassembly _ 33 Part Figure Description Door-Lock S/W Before you start, disassemble Assy Cover Top and Assy Panel Control.1. Open the Door. Remove the Wire Diaphragm and remove the Frame Front. 2. Remove 2 screws with (+) screw driver. 3. Remove Cover Door Switch by gently pushing th...

34 _ Disassembly and Reassembly  Reassembly Part Figure Description Door-Lock S/W 1. Assemble the terminals. (2ea) Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the Cover Door Switch by gently pushing the red box part with hand. Make sure the Wire harness are not gett...

Disassembly and Reassembly _ 35  Disassembly Part Figure Description Heater 1. Separate the Cover Back. The Heater is located in the blue box. 2. Separate the Connection Housing (4ea) and Holder. 3. Remove the nut holding the heater and separate the heater using the 10mm box driver.

36 _ Disassembly and Reassembly  Reassembly Part Figure Description Heater 1. Assemble the heater and using the 10mm box d ssemble the nut holding the heater. 2. Connect the Connection Housing (4ea) and Holder. Make sure the Wire harness are not getting stuck in other parts.

Disassembly and Reassembly _ 37  Disassembly Part Figure Description Thermostats 1. Separate the Cover Back. The Heater is located in the blue box. 2. Separate the Connection Housing (1ea) and Holder 3. Remove the thermostat by grabbing a rubber part and pulling it.

38 _ Disassembly and Reassembly  Reassembly Part Figure Description Thermostats 1. Assemble the thermostat by pushing it. Yellow&Red blue green red 2. Assemble the terminals as shown in the picture. Make sure the Wire harness are not getting stuck in other parts.

Disassembly and Reassembly _ 39  Disassembly Part Figure Description Spring & Damper Before you start, disassemble Assy Cover Top, Assy Panel Control and Frame Front. 1. Disassemble Frame Plate-Up by removing 4 screws using (+) screw driver. 1. Remove 2 bolts holding damper on both sides using ...

40 _ Disassembly and Reassembly  Reassembly Part Figure Description Spring & Damper 1. Assemble 2 bolts with the Tub using 13mm Box driver. 2. Assemble the spring with Tub. 3. Grab both side of spring and assemble the tub with the frame. 4. Assemble 2 bolts holding damper on both sides using bo...

Troubleshooting _ 41 4. TROUBLESHOOTING 4-1. INFORMATION CODE ► When an abnormal condition occurs, melody sounds and displays Info. code indications as shown in the following Info. codes are shown until the status has cleared. No. Information Type Information Code Causes Corrective Actions 1 Water L...

42 _ Troubleshooting No. Information Type Information Code Causes Corrective Actions 5 Communication AC - The signals between the sub and main PBAs are not sensed because of a communications error. - Check the connector connections between the sub and main PBAs carefully. → Check for incorrect or lo...

Troubleshooting _ 43 No. Information Type Information Code Causes Corrective Actions 10 Water Leakage LC LC1 - Heater engagement fault. (out of place)- The air hose is out of place and water leakage occurs during the spin cycle. - The tub back at the safety bolts fixing part is broken. - Water leaka...

44 _ Troubleshooting No. Information Type Information Code Causes Corrective Actions 14 Power UC (9C) - Power condition fault.- This occurs when under or over voltage is supplied.- Extension lead or plug adapter is being used.- Main PBA fault (sometimes) • Check the power supply, polarity and voltag...

Troubleshooting _ 45 PROBLEM SOLUTION The washing machine won’t start. • Make sure the washing machine is plugged in. • Make sure the door is properly closed. • Make sure the water tap is open. • Tap Start or Press Start/Pause button again. Water supply is insufficient, or no water is supplied. • Op...

46 _ Wiring Diagram 5. WIRING DIAGRAM 5-1. WIRING DIAGRAM ► This Document can not be used without Samsung’s authorization. n REFERENCE INFORMATION BLK BLACK BLU BLUE GRN GREEN GRY GRAY NTR NATURAL ORG ORANGE PNK PINK RED RED SKYBLU SKYBLUE VIO VIOLET WHT WHITE YEL YELLOW

47 _ Reference 6. REFERENCE 6-1. WW6100A PROJECT NAME TYPE Volume Year Design Type FEATURE 1 WW 80 T 7 S 4 Function Code Code Year Code Design UX Code Type Auto Detergent Turbidity Code RPM MOTOR Code 01.Washer WW 9 90 2021 A Simple Best 7 Slim ● ● M 1400 DIT 4 8.5 85 2022 B Simple Basic 6 Slim ● X ...

This Service Manual is a property of Samsung Electronics Co.,Ltd.Any unauthorized use of Manual can be punished under applicable International and/or domestic law. © 2022 Samsung Electronics Co.,Ltd. All rights reserved.Printed in Korea GSPN (GLOBAL SERVICE PARTNER NETWORK) Area Web Site Europe, CIS...