Samsung WW12TP04DSB - Manuals

Engl ish English   5 Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:1. This appliance is not to be used by persons (including children) with reduced physical, sensory o...

Engl ish Safety information English 6 6. For appliances with ventilation openings in the base, a carpet must not obstruct the openings. 7. For use in Europe : Children of less than 3 years should be kept away unless continuously supervised. 8. CAUTION : In order to avoid a hazard due to inadvertent ...

Engl ish Safety information English 8 Following the repair by a non-authorized service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which ...

Engl ish English   9 Do not open the washing machine door by force while it is operating (high-temperature washing/drying/spinning).• Water flowing out of the washing machine may result in burns or cause the floor to be slippery. This may result in injury. • Opening the door by force may result in d...

Engl ish Safety information English 12 Do not use water from water cooling/heating devices.• This may result in problems with the washing machine.Do not use natural hand-washing soap for the washing machine.• If it hardens and accumulates inside the washing machine, it may result in problems with th...

Engl ish English   13 Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or the ...

Engl ish Installation English 14 * The design of the drawer and/or the lever differs with the model. Spanner Bolt caps Hose guide Cold water hose Hot water hose Liquid detergent guide (applicable models only) Accessories (not supplied) • Stacking kit • WW**T5*****, WW7*T******, WW8*T6*****, WW8*T7**...

Engl ish English   15 • Liquid detergent guide: Insert it in the detergent compartment to use liquid detergent. Installation requirements Electrical supply and grounding • Use an individual branch circuit specific to the washing machine. • Do not remove or modify the grounding pin of power cord to r...

Engl ish Installation English 16 Flooring For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not resist vibration well and may cause the washing machine...

Engl ish English   17 Step-by-step installation STEP 1  Select a location Location requirements:• Solid, level surface without carpeting or flooring that may obstruct ventilation• Away from direct sunlight• Adequate room for ventilation and wiring• The ambient temperature is always higher than the f...

Engl ish Installation English 20 STEP 3  Adjust the levelling feet 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanne...

Engl ish English   21 STEP 4  Connect the water hose The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose. Connecting to a threaded water tap 1. Connect the water hose to the water tap, and then turn it to the right to tighten....

Engl ish English   23 D 6. While pulling down part (D) on the water hose, connect the water hose to the adaptor. Then, release part (D) . The hose fits into the adaptor with a clicking sound. 7. To complete connecting the water hose, see 2 and 3 on the “ Connecting to a threaded water tap ” section....

Engl ish English   25 STEP 5  Position the drain hose The drain hose can be positioned in three ways: A Over the edge of a wash basin The drain hose must be placed between 60 cm and 90 cm (*) above from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A) . Se...

Engl ish Installation English 26 In a sink drain pipe branch The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.(*) : 60 cm CAUTION Remove the lid on the sink drain pipe branch before connecting the drain pipe to it. STEP 6  Power on Pl...

Engl ish English   27 Before you start Initial setup • When you turn on the washing machine for the first time, the screen shows the initial setup process. Follow the on-screen instructions to complete it. • Initial setup will not repeat after you’ve finalized it. In order to finalize the initial se...

Engl ish Before you start English 28 Laundry guidelines STEP 1  Sort Sort the laundry according to these criteria: • Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon.• colour: Separate whites from colours.• Size: Mixing different sized items together in th...

Engl ish Before you start English 30 Laundry capsules To get the best results from using laundry capsules, please follow these instructions. 1. Put the capsule in the bottom of the empty drum towards the rear. 2. Put the laundry in the drum on top of the capsule. CAUTION For cycles using cold water ...

Engl ish English   31 Detergent drawer guidelines The manual dispenser models provide a three-compartment dispenser: the left compartment for the main wash, the centre for fabric softeners, and the right for the preliminary wash. A 1. Prewash compartment : Apply prewash detergent. 2. Main-wash compa...

Engl ish English   33 To use liquid detergent manually A First insert the provided liquid detergent container in the main-wash compartment . Then, apply liquid detergent to the container below the marked max line (A) . Untitled-3 33 2021-01-25 12:36:51

Engl ish English 34 Operations Control panel 01 03 02 04 10 05 06 07 08 09 01 Power Tap to turn the washing machine on or off.• If you do not manipulate the control panel for 10 minutes after the washing machine is turned on, the washing machine automatically turns off. • The washing machine automat...

Engl ish English   35 10 Smart Control Tap to activate or deactivate the Smart Control function.Tap and hold to enter pairing mode to connect to the SmartThings app.• When the Smart Control function is activated, you can control your washing machine remotely using the SmartThings app on your smartph...

Engl ish Operations English 36 Operating a cycle 2 5 3 4 6 1 1. Tap turn on the washing machine. 2. Turn the Navigation dial to select the cycle you want. - For more information on Cycle overview , see page 37 . 3. Tap , , or to change the default cycle settings. 4. Tap , and then turn the Navigatio...

Engl ish English   37 Cycle overview Cycle Description Max load (kg) 12 kg 8.5 kg Cotton • For cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the rinse count are automatically adjusted according to the load. • For cleaning lightly soiled cotton items at a nomin...

Engl ish Operations English 40 Additional functions Using Additional Functions 1. Tap . 2. Turn the Navigation dial to select the desired additional function. 3. Tap to change the selected function’s settings or start the function. NOTE • To return to the main screen, tap again or turn the Navigatio...

Engl ish English   41 Bubble Soak (applicable models only) This function helps remove a wide variety of stubborn stains. With Bubble Soak selected, laundry is thoroughly soaked in water bubbles for effective washing. 1. Select a cycle and change the cycle settings as necessary. 2. Tap . 3. Turn the ...

Engl ish Operations English 42 Delay End You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle and change the cycle settings as...

Engl ish English   43 System functions Using System Functions 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial and select the desired system function, and then tap . 3. Tap to change the selected function’s settings or start the function. NOTE To return to the main screen, tap again or tur...

Engl ish Operations English 44 Wi-Fi You can turn the washing machine's Wi-Fi on or off. 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial to select Wi-Fi , and then tap . 3. Tap to select On or Off . - The washing machine's Wi-Fi is off as a factory default setting. However, the washing ma...

Engl ish English   45 Special features AddWash (applicable models only) To add laundry after the wash starts, use the AddWash door. 1. Tap and hold to stop the wash cycle. 2. Press the upper area of the AddWash door to unlock the door. The door will move inward slightly when you press it and then op...

Engl ish Operations English 46 • When using hot water for the wash, the AddWash door may appear to leak water after opening and closing the AddWash door. This is normal, simply because steam emerging from the open AddWash door has cooled and formed water drops on the surface. • When the AddWash door...

Engl ish English   47 • If the washing machine's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you turn of the power. Stay Connect Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a cycle. Your washing machine stays...

Engl ish Operations English 48 SmartThings Wi-Fi connection On your smartphone or tablet, go to Settings and turn on the wireless connection and select an AP (Access Point).• This appliance supports the Wi-Fi 2.4 GHz protocols. Download On an app market (Google Play Store, Apple App Store, Samsung G...

Engl ish English   49 Open Source Announcement The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by contacting our support team via http://opensource.samsung.c...

Engl ish English 50 Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. Drum clean+ Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water between 60 °C and 70 °C, and it also removes accumula...

Engl ish English   51 Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover to open. A 3. Put an empty, spacious container aro...

Engl ish Maintenance English 52 Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. AddWash door (applicable models only) A 1. Open the AddWash door. 2. Use a wet cloth to clean the AddWash door. - Do not use c...

Engl ish English   53 Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord. 2. Close the water tap. 3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to prevent wat...

Engl ish Maintenance English 54 Debris filter It is advisable to clean the debris filter every 2 months to prevent its clogging. A clogged debris filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum. See the Eme...

Engl ish English   55 Detergent drawer 1. While holding down the release lever inside the drawer, slide open the drawer. 2. Clean the drawer components in flowing water using a soft brush. 3. Clean the drawer recess using a soft brush. 4. Reinsert the liquid detergent container to the drawer. 5. Sli...

Engl ish Maintenance English 56 Defrosting your washing machine The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water...

Engl ish English   57 Troubleshooting If there is any problem, check the information message on the LCD screen and follow the on-screen instructions.If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the table belo...

Engl ish English   61 Information codes If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action Check drainage Water is not draining.• Make sure the drain hose is not frozen or clogged.• Make sure the drain ho...

Engl ish English   63 Code Action 8C The MEMS sensor is not working properly.• Turn the machine off, and restart the cycle.• If the information code remains, contact a customer service centre. AC6 Check communications between the main and the inverter PBAs.• Depending on the state, the machine may a...

Engl ish English 64 Specifications Fabric care chart The following symbols provide garment care direction. The Clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domesti...

Engl ish English   65 Ironing Iron at maximum sole plate temperature of 200 °C.Iron at maximum sole plate temperature of 150 °C.Iron at maximum sole plate temperature of 110 °C. Caution when using steam irons (work without steam). Do not iron. NOTE The dots indicate the temperature ranges for ironin...

Engl ish Specifications English 66 Specification sheet “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). A B C D E Untitled-3 66 2021-01-25 12:37:04