Samsung WW10T684DLH - Manuals

English   5 Safety information Do not use a damaged power plug, damaged power cord, or loose wall socket.• This may result in electric shock or fire.Do not pull or excessively bend the power cord.Do not twist or tie the power cord.Do not hook the power cord over a metal object, place a heavy object ...

English 6   Safety information Do not open the washing machine door by force while it is operating (high-temperature washing/drying/spinning).• Water flowing out of the washing machine may result in burns or cause the floor to be slippery. This may result in injury. • Opening the door by force may r...

English   9 Safety information Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it.Do not use a strong acidic cleaning agent.Do not use benzene, thinner or alcohol to clean the appliance.• This may result in discolouration, deformation, damage, electric s...

English 10   Safety information Declaration of conformity Hereby, Samsung declares that this radio equipment is in compliance with Directive 2014/53/EU and with the relevant statutory requirements in the UK. The full text of the EU declaration of conformity and the UK declaration of conformity is av...

English   11 Installation Installation Follow these instructions carefully to ensure proper installation of the washing machine and prevent accidents when doing laundry. Installation requirements Electrical supply and grounding Use an individual branch circuit specific to the washing machine. To ens...

English 12   Installation Flooring For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not resist vibrations well and may cause the washing machine to mo...

English   13 Installation STEP 2  Remove the shipping bolts  B 1. Unpack the product package and remove all shipping bolts. 2. Insert the bolt caps (B) into the holes (marked with circles in the figure). NOTE The number of shipping bolts may differ depending on the model. WARNING • To avoid injury,...

English 14   Installation STEP 4  Connect the water hose NOTE These instructions are for the threaded water tap. For more detailed instructions or instructions for connecting the water hose to a non-threaded water tap, please visit the website on the cover of this manual and check the web manual.  ...

English   15 Installation Run Calibration • Initial setup includes the calibration process which comes after the language selection. You must proceed calibration before using the washing machine. • Empty the drum, and then tap to start calibration.• When calibration is complete, power turns off and ...

English 16   Installation Setting the amount of detergent/softener input Follow these instructions to increase or decrease the amount of detergent/softener dispensed automatically. Eco 40-60 For optimal performance  Eco 40-60 For optimal performance  Dose per Wash ‘OK’ to set auto dispense Med. 1....

English   17 Operations Operations For detailed information on using the washing machine, see the provided one-sheet manual. (Washing machine operation guide) NOTE The cycle and function names that appeared in this manual may differ from your product. Cycle and Option list Cycle Eco 40-60 Cotton AI ...

English 18   Operations System Functions Tap and hold for 3 seconds to enter the system functions menu to change the following options. Water Hardness Softener AI Pattern Alarm Calibration Wi-Fi Language Factory Reset • Alarm: You can turn on or off the melody of cycle completion. However, the other...

English   19 Operations SmartThings Wi-Fi connection On your smartphone or tablet, go to Settings and turn on the wireless connection and select an AP (Access Point). • This appliance supports the Wi-Fi 2.4 GHz protocols. Download On an app market (Google Play Store, Apple App Store, Samsung Galaxy ...

English 20   Maintenance Maintenance For instructions on cleaning the washing machine, please visit the website on the cover of this manual and check the web manual. Cleaning Detergent drawer 1. While holding down the release lever on the inner of the drawer, pull the detergent drawer to remove. 2. ...

English 22   Troubleshooting Troubleshooting If there is any problem, check the information message on the LCD screen and follow the on-screen instructions.If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the tab...

English 26   Specifications Specifications Protecting the environment • This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power s...

English   27 Specifications Specification sheet “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). A B C D E Type Front loading washing machine Model name WW1*T****** Dimensions A (Width) 600 mm B (Height) 850 mm C (Depth) 600 mm D 680 mm E 1115 mm Water pressure 50-1000 kPa Net w...

Memo U-PJT_WASHER-AD_SimpleUX_MANUAL_DC68-04197A-04_EN.indd 30 2022/7/13 17:38:24

2 _ Safety Instructions WARNING WHILE SERVICING • Check if the power plug and outlet are damaged, flattened, cut or otherwise degraded. 4 If faulty, replace it immediately. Failing to do so may result in electric shock or fire. • Completely remove any dust or foreign material from the housing, wirin...

Safety Instructions _ 3 CAUTION BEFORE SERVICING • Do not sprinkle water onto the washing machine directly when cleaning it. 4 This may result in electric shock or fire, and may shorten the product lifetime. • Do not place any containers with water or any other liquid on the washing machine 4 If the...

Features and Specifications _ 4 2. FEATURES AND SPECIFICATIONS 2-1. SPECIFICATIONS MODEL WW90T654DLH WW10T754DBH WW90T986DSH WW90T684DLH WW90T534DAW WW90T4540AX Model name Front loading washing machine Dimensions (mm) 600x850x550 600x850x600 600x850x600 600x850x550 600x850x550 600x850x550 Water pres...

5 _ Features and Specifications 2-2. COMPARING SPECIFICATIONS WITH EXISTING MODELS Model name WW90T654DLH WW10T754DBH WW90T986DSH WW90T684DLH WW90T534DAW WW90T4540AX WW6500K Image Capacity 9 10.5 9 9 9 9 9 Main Spec Drum Volume 63 70.5 65.9 63 63 63 63 Max RPM 1400 1400 1600 1400 1400 1400 1400 Moto...

Features and Specifications _ 6 2-3. OPTIONS SPECIFICATIONS NO Unit Part Code Figure Description Qty 1 Bolt Spanner DC60-40146A To remove the shipping bolts To adjust the leveling leg 1 2 Assy Hose Water DC97-17845A (Cold) DC97-17845B (Hot) To setup water supply. Cold only 1, Cold+Hot 2( ★ ) 3 Hose ...

Disassembly and Reassembly _ 7 3. DISASSEMBLY AND REASSEMBLY 3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY Tool Type Remarks Box driver 10mm Heater(1),Tub(12), Fixer screw(5), Motor(2), Balance(9) 13mm Shock Absorber (2 holes each in left/right), Damper(2), Damper(friction 2) 19mm Pulley(1) Double-ended...

8 _ Disassembly and Reassembly 3-2. STANDARD DISASSEMBLY DRAWINGS ► This is a standard disassembly diagram and may differ from the actual product. Use this material as a reference when disassembling and reassembling the product.  Disassembly Part Figure Description Assy Cover Top 1. Remove 2 screws...

Disassembly and Reassembly _ 9  Reassembly Part Figure Description Assy Drawer 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Make sure to fit the rail when reassembling the Assy drawer. 3. Put the drawer in the right direction.

10 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Pull to open the Drawer by hand. 2. While holding down the release lever inside the drawer (red box) , slide open the drawer. 3. Disassemble the Cover Drawer by hand. 4. Pull up the Cap Rinse to remo...

Disassembly and Reassembly _ 11  Reassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Assemble the Cover Drawer by hand. 3. Make sure to fit the rail when reassembling the Assy drawer. 4. Place the drawer in the right...

12 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (Simple) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) ...

Disassembly and Reassembly _ 13  Reassembly Part Figure Description Assy Panel Control (Simple) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Be careful not to break the hook. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the ...

14 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (LED) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) scr...

Disassembly and Reassembly _ 15  Reassembly Part Figure Description Assy Panel Control (LED) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the hook of housing drawer and aseemble s...

16 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Housing-Drawer Before you start, disassemble Assy Cover Top, Assy Panel Control.1. Remove 4 screws to disassemble frame plate- up using (+) screw driver. 2. Remove the Band-ring. (2ea) Be careful not to break the hose.

Disassembly and Reassembly _ 17 Part Figure Description Assy Housing-Drawer 3. Separate the water valve hose with long nose plier. 4. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, disassemble Water Valve. Be careful not to break the hook.

18 _ Disassembly and Reassembly Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Disassemble the 6 screws holding the pump with (+) screw driver. To fully separate, disassemble Water Valve. 2. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, d...

Disassembly and Reassembly _ 19 Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. 2. Assemble the 6 screws holding the pump with (+) screw driver.

20 _ Disassembly and Reassembly  Reassembly Part Figure Description Assy Housing-Drawer 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. Be careful not to break the hose. 2. Assemble the water valve hose with long nose plier. Be careful not to break the hook. Make sur...

Disassembly and Reassembly _ 21 Part Figure Description Assy Housing-Drawer 3. Assemble the Band rings. (2ea) Make sure to insert the hoses and assemble the clamp, band rings correctly. There’re risks of leakage or poor performance when it’s misassembled. 4. Remove 4 screws to disassemble frame plat...

22 _ Disassembly and Reassembly  Disassembly Part Figure Description Frame Front Before you start, disassemble Assy Cover Top, Assy Panel Control. Be careful not to tear up the diaphragm. 1. Using long nose pliers, pick up one of the rings on Wire-Diaphragm which connect the spring and the wire end...

Disassembly and Reassembly _ 23 Part Figure Description Frame Front 6. Remove cover filter by hand. 7. Press the hook to remove Guide cover filter using (-) screw driver. Be careful not to break the hook. 8. Pull the Guide filter towards you. 9. Lift Frame front up to disassemble. Cover-Back Unfaste...

24 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Door Before you start, disassemble Assy Cover Top, Assy Panel Control and Frame Front. 1. Remove the wire by disassembling the 3 hooks using long nose plier. 2. Disassemble the terminal and remove the holders using long nose ...

Disassembly and Reassembly _ 25  Reassembly Part Figure Description Assy Door BACK SIDE FRONT SIDE 1. Put the terminal through the biggest hole and assemble 3 hooks as shown in the pictures. 2. Assemble the door with Frame Front by fitting the two hooks and assemble 2 screws holding the Assy door w...

26 _ Disassembly and Reassembly  Disassembly Part Figure Description Door-Lock S/W Before you start, disassemble Assy Cover Top and Assy Panel Control.1. Open the Door. Remove the Wire Diaphragm and remove the Frame Front. 2. Remove 2 screws with (+) screw driver. 3. Remove Cover Door Switch by gen...

Disassembly and Reassembly _ 27  Reassembly Part Figure Description Door-Lock S/W 1. Assemble the terminals. (2ea) Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the Cover Door Switch by gently pushing the red box part with hand. Make sure the Wire harness are not gett...

28 _ Disassembly and Reassembly  Disassembly Part Figure Description Diaphragm Before you start, remove cover top, Assy Drawer, Assy Panel Control and Frame Front.1. Remove hose and clamp with long nose plier, and unfasten the screw with (+) screw driver. 2. Pull diaphragm towards you. Be careful n...

Disassembly and Reassembly _ 29  Reassembly Part Figure Description Diaphragm 1. Assemble the Diaphragm with tub by hand. Diaphragm and tub has triangle part make sure to fit them correctly. 2. Assemble hose and clamp with long nose plier, and fasten the screw with (+) screw driver.

Wiring Diagram _ 35 5. WIRING DIAGRAM 5-1. WIRING DIAGRAM (SIMPLE) ► This Document can not be used without Samsung’s authorization. n REFERENCE INFORMATION BLK BLACK BLU BLUE GRN GREEN GRY GRAY NTR NATURAL ORG ORANGE PNK PINK RED RED SKYBLU SKYBLUE VIO VIOLET WHT WHITE YEL YELLOW

38 _ Reference 6. REFERENCE 6-1. WW6000T PROJECT NAME ► Door 10-Digit DOOR DESIGN DOOR COLOR DECO COLOR S Best Black D.silver B Better Black Black W Better Black White L Good Black D.silver H Good White D.silver A Basic Black Black T Basic White White C Old Basic Black - E Old Basic White - ► Region...