Samsung WD80TA046BE - Manuals

English 5 Safety inf ormation Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. This appliance is not to be used by persons (including children) with reduced physical,...

8 English Saf ety inf ormation Safety information Critical installation warnings WARNING The installation of this appliance must be performed by a qualified technician or service company. • Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury. The a...

English 9 Safety inf ormation Do not install this appliance in a location where gas may leak. • This may result in electric shock or fire. Do not use an electric transformer. • This may result in electric shock or fire. Do not use a damaged power plug, damaged power cord, or loose wall socket. • Thi...

10 English Saf ety inf ormation Safety information Critical usage warnings WARNING If the appliance is flooded, turn off the water & power supplies immediately and contact your nearest service centre. • Do not touch the power plug with wet hands. • Failure to do so may result in electric shock. ...

English 11 Safety inf ormation • This may result in electric shock, burns or injury. Do not insert your hand or a metal object under the washing machine while it is operating. • This may result in injury. Do not unplug the appliance by pulling the power cord. Always grip the plug firmly and pull it ...

14 English Saf ety inf ormation Safety information Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent. • This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil. Do not use water from w...

English 15 Safety inf ormation Do not use benzene, thinner or alcohol to clean the appliance. • This may result in discolouration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, unplug the appliance from the wall socket. • Failure to do so may result in elect...

16 English Ins tallation Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or t...

18 English Ins tallation Installation Installation requirements Electrical supply and grounding • AC 220-240 V / 50 Hz fuse or circuit breaker is required • Use an individual branch circuit specific to the washing machine To ensure proper grounding, the washing machine comes with a power cord featur...

20 English Ins tallation Installation Step-by-step installation STEP 1 Select a location Location requirements: • Solid, level surface without carpeting or flooring that may obstruct ventilation • Away from direct sunlight • Adequate room for ventilation and wiring • The ambient temperature is alway...

22 English Ins tallation Installation B 3. Insert the bolt caps (B) to the holes (marked with circle in the figure). STEP 3 Adjust the levelling feet 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting t...

24 English Ins tallation Installation STEP 4 Connect the water hose The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose. Connecting to a threaded water tap 1. Connect the water hose to the water tap, and then turn the connecto...

28 English Ins tallation Installation STEP 5 Position the drain hose The drain hose can be positioned in three ways: A Over the edge of a wash basin The drain hose must be placed at a height of between 60 cm and 90 cm (*) from the floor. To keep the spout of the drain hose bent, use the supplied pla...

English 29 Installation In a sink drain pipe branch The drain pipe branch mush be above the sink siphone so that the end of the hose is at least 60 cm above the ground. (*) : 60 cm CAUTION Remove the lid on the sink drain pipe branch before connecting the drain pipe to it. CAUTION Do not put the dra...

30 English Be for e y ou s tar t Before you start Initial settings Run Calibration (recommended) Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration. 1. Power off, and then power on the washing machine. 2. Hold down Temp. and D...

English 31 Befor e you s tar t Turn clothing with buttons and embroideries inside out • If pants or jacket zippers are open while washing, the drum may be damaged. Zippers should be closed and fixed with a string. • Clothing with long strings may become entangled with other clothes. Make sure to tie...

English 33 Befor e you s tar t Detergent recommendation The recommendations apply to the temperature ranges given in the cycle chart.  Recommended  Liquid detergent only – Not recommended  Powder detergent only Cycle Detergent Temp.( oC ) Universal Delicates and woollens Specialist ECO 40-60  – ...

34 English Be for e y ou s tar t Before you start Detergent drawer guidelines The washing machine provides a three-compartment dispenser: the left compartment for the main wash, the centre compartment for fabric softeners, and the right compartment for the preliminary wash. A 01 Prewash compartment:...

English 37 Befor e you s tar t Operations Control panel 11 09 02 10 08 03 04 05 06 07 01 01 Cycle Selector Turn the dial to select a cycle. 02 Display The display shows current cycle information and estimated timeremaining, or an information code when a problem occurs. 03 Temp. Press to change the w...

38 English Oper ations Operations 08 Delay End Delay End lets you set the end time of the current cycle. Based on your settings, the start time of the cycle will be determined by the machine’s internal logic. For example, this setting is useful for programming your machine to finish a wash at the ti...

English 39 Oper ations Drying Only 1 4 3 2 You can dry your clothes directly or dry the washed clothes according to the following procedures. 1. Press Power button to turn on the washing machine. 2. Turn the Cycle Selector to select the appropriate drying cycle. 3. Press Dry Option button to select ...

40 English Oper ations Operations Cycle overview Standard ccycles Cycle Description & Max load (kg) Max load (kg) 9kg model 8kg model 7kg model ECO 40-60 • For cleaning normally soiled cotton items which are declared to be washable at 40 °C or 60 °C, together in the same cycle. This cycle is use...

44 English Oper ations Operations Settings Child Lock To prevent children or infants from accidentally starting or setting the washing machine, Child Lock locks all buttons except for the Power button. • To set the Child Lock function, hold down Temp. and Rinse simultaneously for 3 seconds. To activ...

English 45 Maint enanc e Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. Drum clean Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water between 60 °C and 70 °C. 1. Press Power to turn o...

46 English Maint enanc e Maintenance Smart check To enable this function, you must first download the Samsung Smart Washer app at the Play Store or the Apple Store , and install it on a mobile device featuring a camera function. The Smart Check function has been optimized for Galaxy & iPhone ser...

English 47 Maint enanc e Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. A 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover (A) to open. B 3. Put an empty, spacious cont...

48 English Maint enanc e Maintenance Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the...

English 51 Maint enanc e Recovery from freezing The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4. Pour warm w...

52 English Tr ouble shoo ting Troubleshooting If there is any problem, check the information message on the LED screen and follow the on-screen instructions.If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the ta...

56 English Tr ouble shoo ting Troubleshooting Problem Action No bubbles are seen (Bubble models only). • You may not be able to see bubbles if there is too much items in the drum. • Severely contaminated laundry may not generate bubbles. If a problem persists, contact a service center. The number of...

English 59 Speci fic ations Specifications Fabric care chart The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manuf...

60 English Speci fic ations Specifications Protecting the environment • This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power s...

Memo WD80TA046BE_04200B-03_EN(Indicative).indd 65 2021/2/24 14:58:28

consejos útiles para la lavadora de tambor ✔ Las instrucciones y las ilustraciones de este documento puede diferir de las del producto que haya adquirido. Si desea obtener más información, consulte el manual del usuario. INSTALACIÓN DE LA LAVADORA • Si instala la lavadora en una superficie resbaladiz...

INTENTE LO SIGUIENTE... La puerta no se abre La puerta no se abre cuando la temperatura interior de la lavadora es alta o cuando el tambor está lleno de agua. • Cuando la temperatura interna del aire tras el lavado supera los 70 °C o la temperatura del agua supera los 55 °C. Espere a que disminuya l...

suggerimenti utili per il cestello della lavabiancheria ✔ Le descrizioni e le immagini contenute in questo documento possono differire dal prodotto acquistato. Per informazioni dettagliate, consultare il manuale dell’utente. INSTALLAZIONE DELLA LAVABIANCHERIA • L’installazione della lavabiancheria s...

PROVARE LE SEGUENTI... Se lo sportello non si apre Lo sportello non si apre quando la temperatura all’interno della lavabiancheria è elevata o il cestello è pieno d’acqua. • Quando la temperatura interna dell’aria dopo un lavaggio è superiore a 70 °C, o la temperatura dell’acqua è superiore a 55 °C....

sugestões úteis para a sua máquina de lavar roupa com tambor ✔ As instruções e imagens neste documento podem ser diferentes do produto que adquiriu. Para mais informações, consulte o manual de utilizador. INSTALAR A MÁQUINA DE LAVAR ROUPA • Instalar a sua máquina de lavar roupa num local escorregadi...

полезные советы при использовании стиральной машины с барабаном ✔ Описания и изображения, приведенные в данном документе, могут отличаться от реального приобретаемого продукта. Для получения дополнительной информации см. руководство пользователя. УСТАНОВКА СТИРАЛЬНОЙ МАШИНЫ • Установка стиральной ма...

ПОПЫТАЙТЕСЬ ВЫПОЛНИТЬ СЛЕДУЮЩЕЕ... Дверца не открывается. Дверца не открывается, когда температура внутри машины высокая или бак наполнен водой. • Когда температура внутри машины после стирки выше 70 °C или температура воды более 55 °C. Подождите, пока температура внутри машины не понизится. • Бак н...

2 _ Safety Instructions WARNING WHILE SERVICING • Check if the power plug and outlet are damaged, flattened, cut or otherwise degraded. 4 If faulty, replace it immediately. Failing to do so may result in electric shock or fire. • Completely remove any dust or foreign material from the housing, wirin...

Safety Instructions _ 3 CAUTION BEFORE SERVICING • Do not sprinkle water onto the washing machine directly when cleaning it. 4 This may result in electric shock or fire, and may shorten the product lifetime. • Do not place any containers with water or any other liquid on the washing machine 4 If the...

Features and Specifications _ 4 2. FEATURES AND SPECIFICATIONS 2-1. SPECIFICATIONS MODEL WD90T654DBH WD10T734DBH WD90T984DSH WD80T534DBN WD70T4046EW Model Name Front loading washing machine Water Pressure 50kPa-800kPa NET weight (kg) 68 80 86 68 63 Wash & Spin Capacity 9 10.5 9 8 7 Dry Capacity ...

5 _ Features and Specifications 2-2. COMPARING SPECIFICATIONS WITH EXISTING MODELS Model name WD90T654DBH WD10T734DBH WD90T984DSH WD80T534DBN WD70T4046EW WD10K64**** Image Capacity 9 10.5 9 8 7 10.2 Dry Capacity 6 6 6 5 4 6 Main Spec Drum Volume 63 70.5 65.9 58 60.1 63 Max RPM 1400 1400 1400 1400 14...

Features and Specifications _ 6 2-3. OPTIONS SPECIFICATIONS NO Item Code QTY Remarks 1 FASTENER-BOLT DC60-00104A 1 Default 2 CAP-FIXER DC67-00307A 4(8kg model)5(9kg model) For specific models only 3 CAP-FIXER DC67-00208B 1 For specific models only 4 ASSY HOSE WATER DC97-16921A ★ For specific models ...

Disassembly and Reassembly _ 7 3. DISASSEMBLY AND REASSEMBLY 3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY Tool Type Remarks Box driver 10mm Heater(1),Tub(12), Fixer screw(5), Motor(2), Balance(9) 13mm Shock Absorber (2 holes each in left/right), Damper(2), Damper(friction 2) 19mm Pulley(1) Double-ended...

8 _ Disassembly and Reassembly 3-2. STANDARD DISASSEMBLY DRAWINGS ► This is a standard disassembly diagram and may differ from the actual product. Use this material as a reference when disassembling and reassembling the product.  Disassembly Part Figure Description Assy Cover Top 1. Remove 2 screws...

Disassembly and Reassembly _ 9  Reassembly Part Figure Description Assy Drawer 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Make sure to fit the rail when reassembling the Assy drawer. 3. Put the drawer in the right direction.

10 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Pull to open the Drawer by hand. 2. While holding down the release lever inside the drawer (red box) , slide open the drawer. 3. Disassemble the Cover Drawer by hand. 4. Pull up the Cap Rinse to remo...

Disassembly and Reassembly _ 11  Reassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Assemble the Cover Drawer by hand. 3. Make sure to fit the rail when reassembling the Assy drawer. 4. Place the drawer in the right...

12 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (Simple) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) ...

Disassembly and Reassembly _ 13  Reassembly Part Figure Description Assy Panel Control (Simple) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Be careful not to break the hook. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the ...

14 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (LED) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) scr...

Disassembly and Reassembly _ 15  Reassembly Part Figure Description Assy Panel Control (LED) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the hook of housing drawer and aseemble s...

16 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Housing-Drawer Before you start, disassemble Assy Cover Top, Assy Panel Control.1. Remove 4 screws to disassemble frame plate- up using (+) screw driver. 2. Remove the Band-ring. (2ea) Be careful not to break the hose.

Disassembly and Reassembly _ 17 Part Figure Description Assy Housing-Drawer 3. Separate the water valve hose with long nose plier. 4. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, disassemble Water Valve. Be careful not to break the hook.

18 _ Disassembly and Reassembly Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Disassemble the 6 screws holding the pump with (+) screw driver. To fully separate, disassemble Water Valve. 2. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, d...

Disassembly and Reassembly _ 19 Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. 2. Assemble the 6 screws holding the pump with (+) screw driver.

20 _ Disassembly and Reassembly  Reassembly Part Figure Description Assy Housing-Drawer 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. Be careful not to break the hose. 2. Assemble the water valve hose with long nose plier. Be careful not to break the hook. Make sur...

Disassembly and Reassembly _ 21 Part Figure Description Assy Housing-Drawer 3. Assemble the Band rings. (2ea) Make sure to insert the hoses and assemble the clamp, band rings correctly. There’re risks of leakage or poor performance when it’s misassembled. 4. Remove 4 screws to disassemble frame plat...

22 _ Disassembly and Reassembly  Disassembly Part Figure Description Frame Front Before you start, disassemble Assy Cover Top, Assy Panel Control. Be careful not to tear up the diaphragm. 1. Using long nose pliers, pick up one of the rings on Wire-Diaphragm which connect the spring and the wire end...

Disassembly and Reassembly _ 23 Part Figure Description Frame Front 6. Remove cover filter by hand. 7. Press the hook to remove Guide cover filter using (-) screw driver. Be careful not to break the hook. 8. Pull the Guide filter towards you. 9. Lift Frame front up to disassemble. Cover-Back Unfaste...

24 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Door Before you start, disassemble Assy Cover Top, Assy Panel Control and Frame Front. 1. Remove the wire by disassembling the 3 hooks using long nose plier. 2. Disassemble the terminal and remove the holders using long nose ...

Disassembly and Reassembly _ 25  Reassembly Part Figure Description Assy Door BACK SIDE FRONT SIDE 1. Put the terminal through the biggest hole and assemble 3 hooks as shown in the pictures. 2. Assemble the door with Frame Front by fitting the two hooks and assemble 2 screws holding the Assy door w...

26 _ Disassembly and Reassembly  Disassembly Part Figure Description Door-Lock S/W Before you start, disassemble Assy Cover Top and Assy Panel Control.1. Open the Door. Remove the Wire Diaphragm and remove the Frame Front. 2. Remove 2 screws with (+) screw driver. 3. Remove Cover Door Switch by gen...

Disassembly and Reassembly _ 27  Reassembly Part Figure Description Door-Lock S/W 1. Assemble the terminals. (2ea) Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the Cover Door Switch by gently pushing the red box part with hand. Make sure the Wire harness are not gett...

28 _ Disassembly and Reassembly  Disassembly Part Figure Description Diaphragm Before you start, remove cover top, Assy Drawer, Assy Panel Control and Frame Front.1. Unfasten the screw with (+) screw driver on Joint Diaphragm and wire diaphragm. 2. Remove Joint Diaphragm by hand.3. Remove hose and ...

Disassembly and Reassembly _ 29  Reassembly Part Figure Description Diaphragm 1. Assemble the Diaphragm with tub by hand. Diaphragm and tub has triangle part make sure to fit them correctly. 2. Assemble hose and clamp with long nose plier, and fasten the screw with (+) screw driver. 3. Assemble Joi...

Wiring Diagram _ 35 5. WIRING DIAGRAM 5-1. WIRING DIAGRAM (SIMPLE) ► This Document can not be used without Samsung’s authorization. n REFERENCE INFORMATION BLK BLACK BLU BLUE GRN GREEN GRY GRAY NTR NATURAL ORG ORANGE PNK PINK RED RED SKYBLU SKYBLUE VIO VIOLET WHT WHITE YEL YELLOW

38 _ Reference 6. REFERENCE 6-1. WD6000T PROJECT NAME ► Door 10-Digit DOOR DESIGN DOOR COLOR DECO COLOR S Best Black D.silver B Better Black Black W Better Black White L Good Black D.silver H Good White D.silver A Basic Black Black T Basic White White C Old Basic Black - E Old Basic White - ► Region...