Samsung WD70T554DBE - Manuals

English English   5 Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:1. This appliance is not intended for use by persons (including children) with reduced physical, sens...

English English   7 23. This appliance is intended to be used in household only and it is not intended to be used such as: ‒ staff kitchen areas in shops, offices and other working environments; ‒ farm houses; ‒ by clients in hotels, motels and other residential type environments; ‒ bed and breakfas...

English Safety information English 8 Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight or water (rain drops).Do not install this appliance in a location exposed to low temperatures.• Frost may cause the tubes to burst.Do not install this ap...

English English   9 Critical usage warnings WARNING If the appliance is flooded, turn off the water & power supplies immediately and contact your nearest service centre.• Do not touch the power plug with wet hands.• Failure to do so may result in electric shock.If the appliance generates a stran...

English Safety information English 10 Do not attempt to repair, disassemble, or modify the appliance yourself.• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.• When the appliance needs to be repaired or reinstalled, contact your nearest service centre.• Failure to d...

English Safety information English 12 Also, do not allow children to play around the washing machine or touch the door glass. • This may result in burns.Do not insert your hand into the detergent drawer.• This may result in injury as your hand may be caught by the detergent input device.Remove the l...

English English   13 Sort the laundry by colour on the basis of its colorfastness and select the recommended cycle, water temperature and additional functions.• This may result in discolouration or fabric damage.Take care that children’s fingers are not caught in the door when you close it.• Failure...

English English 14 Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or the par...

English Installation English 16 Installation requirements Electrical supply and grounding • Use an individual branch circuit specific to the washing machine. To ensure proper grounding, the washing machine comes with a power cord featuring a three-prong grounding plug for use in a properly installed...

English English   17 Flooring For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not resist vibration well and may cause the washing machine to move sli...

English Installation English 18 Step-by-step installation STEP 1  Select a location Location requirements:• Solid, level surface without carpeting or flooring that may obstruct ventilation• Away from direct sunlight• Adequate room for ventilation and wiring• The ambient temperature is always higher ...

English Installation English 20 B 3. Insert the bolt caps (B) to the holes (marked with circle in the figure). U-PJT_COMBO-MD_SimpleUX_WEB_SSEC-02__EU_English.indd 20 2022/4/19 19:45:32

English English   21 STEP 3  Adjust the levelling feet 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner. CAUTION W...

English Installation English 22 STEP 4  Connect the water hose The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose. Connecting to a threaded water tap 1. Connect the water hose to the water tap, and then turn it to the right t...

English English   23 Connecting to a non-threaded water tap A B 1. Remove the adaptor (A) from the water hose (B) . 2. Use a Phillips screwdriver to loosen four screws on the adaptor. C 3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*). C 4. Insert the adaptor ont...

English Installation English 26 STEP 5  Position the drain hose The drain hose can be positioned in three ways: A Over the edge of a wash basin The drain hose must be placed between 60 cm and 90 cm (*) above from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guid...

English English   27 In a sink drain pipe branch The drain pipe branch mush be above the sink siphon so that the end of the hose is at least 60 cm above the ground.(*) : 60 cm CAUTION Remove the lid on the sink drain pipe branch before connecting the drain pipe to it. STEP 6  Power on Plug the power...

English English 28 Before you start NOTE Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum. Initial setup • When you turn on the washing machine for the first time, the screen shows the initial setup process. Follow the on-screen instructi...

English English   29 Laundry guidelines STEP 1  Sort Sort the laundry according to these criteria: • Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon.• colour: Separate whites from colours.• Size: Mixing different sized items together in the drum improves ...

English English   31 Laundry capsules To get the best results from using laundry capsules, please follow these instructions. 1. Put the capsule in the bottom of the empty drum towards the rear. 2. Put the laundry in the drum on top of the capsule. CAUTION For cycles using cold water or cycles that c...

English Before you start English 32 Detergent recommendation The recommendations apply to the temperature ranges given in the cycle chart.  Recommended  Liquid detergent only – Not recommended  Powder detergent only Cycle Detergent Temp. (°C) Universal Delicates and woollens Specialist Eco 40-60 ...

English English   33 Detergent drawer guidelines The manual dispenser models provide a three-compartment dispenser: the left compartment for the main wash, the centre for fabric softeners, and the right for the preliminary wash. A 1. Prewash compartment : Apply prewash detergent. 2. Main-wash compar...

English Before you start English 34 To apply washing agents to the manual dispenser A 1. Slide open the detergent drawer. 2. Apply laundry detergent to the main-wash compartment as instructed or recommended by the manufacturer. To use liquid detergent, see page 35 . Do not exceed the max line (A) wh...

English English 36 Operations NOTE The cycle and function names that appeared in this manual may differ from your product. Control panel 01 03 02 04 10 05 06 07 08 09 01 Power Tap to turn the washing machine on or off.• If you do not manipulate the control panel for 10 minutes after the washing mach...

English English   37 10 Smart Control Tap to activate or deactivate the Smart Control function.Tap and hold to enter pairing mode to connect to the SmartThings app.• When the Smart Control function is activated, you can control your washing machine remotely using the SmartThings app on your smartpho...

English Operations English 38 Cycle overview Cycle descriptions Cycle Description Max load (kg) WD1* WD9* WD8* WD7* Eco 40-60 • For cleaning normally soiled cotton items which are declared to be washable at 40 °C or 60 °C, together in the same cycle. This cycle is used to assess the compliance with ...

English English   41 Additional functions Using Additional Functions 1. Tap . 2. Turn the Navigation dial to select the desired additional function. 3. Tap to change the selected function’s settings or start the function. NOTE • To return to the main screen, tap again or turn the Navigation dial to ...

English Operations English 42 Prewash You can add a preliminary washing cycle before the main wash cycle. 1. Select a cycle and change the cycle settings as necessary. 2. Tap . 3. Turn the Navigation dial to select Prewash , and then tap . 4. Tap and hold . Bubble Soak This function helps remove a w...

English English   43 Delay End You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle and change the cycle settings as necessary...

English Operations English 44 System functions Using System Functions 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial and select the desired system function, and then tap . 3. Tap to change the selected function’s settings or start the function. NOTE To return to the main screen, tap agai...

English English   45 Wi-Fi You can turn the washing machine's Wi-Fi on or off. 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial to select Wi-Fi , and then tap . 3. Tap to select On or Off . - The washing machine's Wi-Fi is off as a factory default setting. However, the washing machine's Wi...

English Operations English 46 Special features AddWash (applicable models only) To add laundry after the wash starts, use the AddWash door. 1. Tap and hold to stop the wash cycle. 2. Press the upper area of the AddWash door to unlock the door. The door will move inward slightly when you press it and...

English English   47 • When the AddWash door closes, the door seals up and no water can leak. However, you may encounter what appears to be water leak around the door - some residual water remaining around the AddWash door may form water drops. This is normal. • Neither the main door nor the AddWash...

English Operations English 48 Stay Connect Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a cycle. Your washing machine stays connected to the app so you can send additional instructions, whether you are at home or away. 1. If you turn on the S...

English English   49 SmartThings (applicable models only) Wi-Fi connection On your smartphone or tablet, go to Settings and turn on the wireless connection and select an AP (Access Point).• This appliance supports the Wi-Fi 2.4 GHz protocols. Download On an app market (Google Play Store, Apple App S...

English Operations English 50 Open Source Announcement The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by contacting our support team via http://opensource.s...

English Maintenance English 52 Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the washing machine from the electrical outlet. 2. Open the filter cover . - TYPE 1: Push down the latch of the filter cover to open. - TY...

English English   53 Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. AddWash door (applicable models only) A 1. Open the AddWash door. 2. Use a wet cloth to clean the AddWash door. - Do not use cleaning age...

English Maintenance English 54 Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord. 2. Close the water tap. 3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to pr...

English English   55 Debris filter It is advisable to clean the debris filter every 2 months to prevent its clogging. A clogged debris filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum. See the Emergency drai...

English Maintenance English 56 Detergent drawer 1. While holding down the release lever inside the drawer, slide open the drawer. 2. Clean the drawer components in flowing water using a soft brush. 3. Clean the drawer recess using a soft brush. 4. Reinsert the liquid detergent container to the drawe...

English English   57 Defrosting your washing machine The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4. Pour w...

English English 58 Troubleshooting If there is any problem, check the information message on the LCD screen and follow the on-screen instructions.If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the table below a...

English Troubleshooting English 62 Information codes If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action Check drainage Water is not draining.• Make sure the drain hose is not frozen or clogged.• Make sure...

English English   63 Code Action AddWash door is open (applicable models only) This message appears when you open the AddWash door without tapping and holding . If this happens, do one of the following:• Press the AddWash door to close properly. Then, tap and hold and try again. • To add laundry, op...

English Troubleshooting English 64 Code Action AC6 Check communications between the main and the inverter PBAs.• Depending on the state, the machine may automatically returns to normal operation. • Turn the machine off, and restart the cycle.• If the information code remains, contact a customer serv...

English English   65 Specifications Fabric care chart The following symbols provide garment care direction. The Clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domest...

English Specifications English 66 Ironing Iron at maximum sole plate temperature of 200 °C.Iron at maximum sole plate temperature of 150 °C.Iron at maximum sole plate temperature of 110 °C. Caution when using steam irons (work without steam).Do not iron. NOTE The dots indicate the temperature ranges...

English English   67 Spare parts guarantee We guarantee that the following spare parts will be available to professional repairers and end-users for a minimum period of 10 years after placing the last unit of the model on the market.• Door, door hinges and seals, other seals, door locking assembly, ...

English Specifications English 68 Type Front loading washing machine Model name WD1*T***** Dimensions A (Width) 600 mm B (Height) 850 mm C (Depth) 600 mm D 690 mm (WD**T*8****, WD**T*5****) 680 mm (WD**T*3****, WD**T*0****) E 1120 mm Water pressure 50-1000 kPa Net weight 80 kg Maximum load capacity ...

English English   73 Model Cycles Capacity (kg) Program Time (HH:MM) Energy Consumption (kWh/Cycle) Water Consumption (L/ cycle) Maximum Temperature (°C) Remaining Moisture Content (%) Spinning Speed (RPM) WD8*T73**** WD8*T63****WD8*T53****WD8*T43****WD8*T70****WD8*T60****WD8*T50**** WD8*T40**** Eco...

English English 74 Contact information QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/support IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support GERMANY 06196 77 555 77 www.samsung.com/de/support FRANCE 01 48 63 00 00 www.samsung.com/fr/support SPAIN...

English English   75 COUNTRY CALL OR VISIT US ONLINE AT ROMANIA *8000 (apel in retea) 08008-726-78-64 (08008-SAMSUNG) Apel GRATUIT Atenţie: Dacă efectuaţi apelul din reţeaua Digi (RCS/RDS), vă rugăm să ne contactaţi formând numărul Telverde fără ultimele două cifre, astfel: 0800872678. www.samsung.c...

2 _ Safety Instructions WARNING WHILE SERVICING • Check if the power plug and outlet are damaged, flattened, cut or otherwise degraded. 4 If faulty, replace it immediately. Failing to do so may result in electric shock or fire. • Completely remove any dust or foreign material from the housing, wirin...

Safety Instructions _ 3 CAUTION BEFORE SERVICING • Do not sprinkle water onto the washing machine directly when cleaning it. 4 This may result in electric shock or fire, and may shorten the product lifetime. • Do not place any containers with water or any other liquid on the washing machine 4 If the...

Features and Specifications _ 4 2. FEATURES AND SPECIFICATIONS 2-1. SPECIFICATIONS MODEL WD90T654DBH WD10T734DBH WD90T984DSH WD80T534DBN WD70T4046EW Model Name Front loading washing machine Water Pressure 50kPa-800kPa NET weight (kg) 68 80 86 68 63 Wash & Spin Capacity 9 10.5 9 8 7 Dry Capacity ...

5 _ Features and Specifications 2-2. COMPARING SPECIFICATIONS WITH EXISTING MODELS Model name WD90T654DBH WD10T734DBH WD90T984DSH WD80T534DBN WD70T4046EW WD10K64**** Image Capacity 9 10.5 9 8 7 10.2 Dry Capacity 6 6 6 5 4 6 Main Spec Drum Volume 63 70.5 65.9 58 60.1 63 Max RPM 1400 1400 1400 1400 14...

Features and Specifications _ 6 2-3. OPTIONS SPECIFICATIONS NO Item Code QTY Remarks 1 FASTENER-BOLT DC60-00104A 1 Default 2 CAP-FIXER DC67-00307A 4(8kg model)5(9kg model) For specific models only 3 CAP-FIXER DC67-00208B 1 For specific models only 4 ASSY HOSE WATER DC97-16921A ★ For specific models ...

Disassembly and Reassembly _ 7 3. DISASSEMBLY AND REASSEMBLY 3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY Tool Type Remarks Box driver 10mm Heater(1),Tub(12), Fixer screw(5), Motor(2), Balance(9) 13mm Shock Absorber (2 holes each in left/right), Damper(2), Damper(friction 2) 19mm Pulley(1) Double-ended...

8 _ Disassembly and Reassembly 3-2. STANDARD DISASSEMBLY DRAWINGS ► This is a standard disassembly diagram and may differ from the actual product. Use this material as a reference when disassembling and reassembling the product.  Disassembly Part Figure Description Assy Cover Top 1. Remove 2 screws...

Disassembly and Reassembly _ 9  Reassembly Part Figure Description Assy Drawer 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Make sure to fit the rail when reassembling the Assy drawer. 3. Put the drawer in the right direction.

10 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Pull to open the Drawer by hand. 2. While holding down the release lever inside the drawer (red box) , slide open the drawer. 3. Disassemble the Cover Drawer by hand. 4. Pull up the Cap Rinse to remo...

Disassembly and Reassembly _ 11  Reassembly Part Figure Description Assy Drawer (Auto Dispense) 1. Fit the hole and press the Cap Rinse so that it can be assembled. 2. Assemble the Cover Drawer by hand. 3. Make sure to fit the rail when reassembling the Assy drawer. 4. Place the drawer in the right...

12 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (Simple) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) ...

Disassembly and Reassembly _ 13  Reassembly Part Figure Description Assy Panel Control (Simple) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Be careful not to break the hook. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the ...

14 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Panel Control (LED) - Before you start, disassemble Assy Cover Top, Assy Drawer. 1. Remove 2 screws holding the drawer and panel using (+) screw driver. 2. Remove the screws at the top of the ASSY- PANEL CONTROL using (+) scr...

Disassembly and Reassembly _ 15  Reassembly Part Figure Description Assy Panel Control (LED) 1. Connect the terminal by hand. Take a look at the hook and put it in the right place. Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the hook of housing drawer and aseemble s...

16 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Housing-Drawer Before you start, disassemble Assy Cover Top, Assy Panel Control.1. Remove 4 screws to disassemble frame plate- up using (+) screw driver. 2. Remove the Band-ring. (2ea) Be careful not to break the hose.

Disassembly and Reassembly _ 17 Part Figure Description Assy Housing-Drawer 3. Separate the water valve hose with long nose plier. 4. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, disassemble Water Valve. Be careful not to break the hook.

18 _ Disassembly and Reassembly Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Disassemble the 6 screws holding the pump with (+) screw driver. To fully separate, disassemble Water Valve. 2. Separate Housing Drawer low by pressing the hooks on both sides by hand. To fully separate, d...

Disassembly and Reassembly _ 19 Part Figure Description Assy Housing Drawer (Auto Dispense) 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. 2. Assemble the 6 screws holding the pump with (+) screw driver.

20 _ Disassembly and Reassembly  Reassembly Part Figure Description Assy Housing-Drawer 1. Assemble the Housing Drawer low by pressing the hooks on both sides by hand. Be careful not to break the hose. 2. Assemble the water valve hose with long nose plier. Be careful not to break the hook. Make sur...

Disassembly and Reassembly _ 21 Part Figure Description Assy Housing-Drawer 3. Assemble the Band rings. (2ea) Make sure to insert the hoses and assemble the clamp, band rings correctly. There’re risks of leakage or poor performance when it’s misassembled. 4. Remove 4 screws to disassemble frame plat...

22 _ Disassembly and Reassembly  Disassembly Part Figure Description Frame Front Before you start, disassemble Assy Cover Top, Assy Panel Control. Be careful not to tear up the diaphragm. 1. Using long nose pliers, pick up one of the rings on Wire-Diaphragm which connect the spring and the wire end...

Disassembly and Reassembly _ 23 Part Figure Description Frame Front 6. Remove cover filter by hand. 7. Press the hook to remove Guide cover filter using (-) screw driver. Be careful not to break the hook. 8. Pull the Guide filter towards you. 9. Lift Frame front up to disassemble. Cover-Back Unfaste...

24 _ Disassembly and Reassembly  Disassembly Part Figure Description Assy Door Before you start, disassemble Assy Cover Top, Assy Panel Control and Frame Front. 1. Remove the wire by disassembling the 3 hooks using long nose plier. 2. Disassemble the terminal and remove the holders using long nose ...

Disassembly and Reassembly _ 25  Reassembly Part Figure Description Assy Door BACK SIDE FRONT SIDE 1. Put the terminal through the biggest hole and assemble 3 hooks as shown in the pictures. 2. Assemble the door with Frame Front by fitting the two hooks and assemble 2 screws holding the Assy door w...

26 _ Disassembly and Reassembly  Disassembly Part Figure Description Door-Lock S/W Before you start, disassemble Assy Cover Top and Assy Panel Control.1. Open the Door. Remove the Wire Diaphragm and remove the Frame Front. 2. Remove 2 screws with (+) screw driver. 3. Remove Cover Door Switch by gen...

Disassembly and Reassembly _ 27  Reassembly Part Figure Description Door-Lock S/W 1. Assemble the terminals. (2ea) Make sure the Wire harness are not getting stuck in other parts. 2. Assemble the Cover Door Switch by gently pushing the red box part with hand. Make sure the Wire harness are not gett...

28 _ Disassembly and Reassembly  Disassembly Part Figure Description Diaphragm Before you start, remove cover top, Assy Drawer, Assy Panel Control and Frame Front.1. Unfasten the screw with (+) screw driver on Joint Diaphragm and wire diaphragm. 2. Remove Joint Diaphragm by hand.3. Remove hose and ...

Disassembly and Reassembly _ 29  Reassembly Part Figure Description Diaphragm 1. Assemble the Diaphragm with tub by hand. Diaphragm and tub has triangle part make sure to fit them correctly. 2. Assemble hose and clamp with long nose plier, and fasten the screw with (+) screw driver. 3. Assemble Joi...

Wiring Diagram _ 35 5. WIRING DIAGRAM 5-1. WIRING DIAGRAM (SIMPLE) ► This Document can not be used without Samsung’s authorization. n REFERENCE INFORMATION BLK BLACK BLU BLUE GRN GREEN GRY GRAY NTR NATURAL ORG ORANGE PNK PINK RED RED SKYBLU SKYBLUE VIO VIOLET WHT WHITE YEL YELLOW

38 _ Reference 6. REFERENCE 6-1. WD6000T PROJECT NAME ► Door 10-Digit DOOR DESIGN DOOR COLOR DECO COLOR S Best Black D.silver B Better Black Black W Better Black White L Good Black D.silver H Good White D.silver A Basic Black Black T Basic White White C Old Basic Black - E Old Basic White - ► Region...

consejos útiles para la lavadora de tambor ✔ Las instrucciones y las ilustraciones de este documento puede diferir de las del producto que haya adquirido. Si desea obtener más información, consulte el manual del usuario. INSTALACIÓN DE LA LAVADORA • Si instala la lavadora en una superficie resbaladiz...

INTENTE LO SIGUIENTE... La puerta no se abre La puerta no se abre cuando la temperatura interior de la lavadora es alta o cuando el tambor está lleno de agua. • Cuando la temperatura interna del aire tras el lavado supera los 70 °C o la temperatura del agua supera los 55 °C. Espere a que disminuya l...

suggerimenti utili per il cestello della lavabiancheria ✔ Le descrizioni e le immagini contenute in questo documento possono differire dal prodotto acquistato. Per informazioni dettagliate, consultare il manuale dell’utente. INSTALLAZIONE DELLA LAVABIANCHERIA • L’installazione della lavabiancheria s...

PROVARE LE SEGUENTI... Se lo sportello non si apre Lo sportello non si apre quando la temperatura all’interno della lavabiancheria è elevata o il cestello è pieno d’acqua. • Quando la temperatura interna dell’aria dopo un lavaggio è superiore a 70 °C, o la temperatura dell’acqua è superiore a 55 °C....

sugestões úteis para a sua máquina de lavar roupa com tambor ✔ As instruções e imagens neste documento podem ser diferentes do produto que adquiriu. Para mais informações, consulte o manual de utilizador. INSTALAR A MÁQUINA DE LAVAR ROUPA • Instalar a sua máquina de lavar roupa num local escorregadi...

полезные советы при использовании стиральной машины с барабаном ✔ Описания и изображения, приведенные в данном документе, могут отличаться от реального приобретаемого продукта. Для получения дополнительной информации см. руководство пользователя. УСТАНОВКА СТИРАЛЬНОЙ МАШИНЫ • Установка стиральной ма...

ПОПЫТАЙТЕСЬ ВЫПОЛНИТЬ СЛЕДУЮЩЕЕ... Дверца не открывается. Дверца не открывается, когда температура внутри машины высокая или бак наполнен водой. • Когда температура внутри машины после стирки выше 70 °C или температура воды более 55 °C. Подождите, пока температура внутри машины не понизится. • Бак н...