Samsung SC8551 - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFEGUARDS

1 IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of thecleaner. 2. WARNING : Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck...

Page 3 - ASSEMBLING THE CLEANER; Features may vary according to model.

2 1 ASSEMBLING THE CLEANER Features may vary according to model. OPTION ▼ For storage, park the floor nozzle. OPTION CAUTION : Please do not use dust bin handlewhen carrying machine. DJ68-00330A(neop)-EN(0.2) 3/16/06 8:21 PM Page 4

Page 4 - OPERATING THE CLEANER; HANDLE CONTROL; SENDER; NOTE

3 2 OPERATING THE CLEANER 2-1 POWER CORD 2-2 POWER CONTROL (INFRARED CONTROL) HANDLE CONTROL 1. Vacuum cleaner ON/OFF Press the ON/OFF button to operate the vacuum cleaner.Press again to stop the vacuum cleaner. 2. Vacuum cleaner MODE (+/-) Press the MODE button repeatedly to select the correct mode...

Page 5 - -3 HOW TO USE AND MAINTAIN THE ACCESSORIES; PIPE

ACCESSORY Push the accessory on tothe end of the hose han-dle. Pull out and turn the dust-ing brush for cleaning deli-cate areas. To use the upholstery tool,push the accessory on tothe end of the hose handlein the opposite direction. ELBOW EXTENDING TUBE (OPTION) 1. Connect the elbow extending tube ...

Page 7 - EMPTYING THE DUST BIN

6 Throw away dust inthe bin. Close the dust bin cover. Before use, push the dust bininto the main body of the vac-uum cleaner until you hearthe "click" sound. Once dust reaches the dust fullmark, or once the filter check lightis on, empty the dust bin. Take the dust bin out bypressing the bu...

Page 8 - CLEANING THE DUST PACK

7 4 CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK Suction is significantly weakened during cleaning.Shaking sound of inlet stuck to the floor (soft mats, blankets, etc.) is heard. Turn the vacuum power to 'MAX' If the filter check indicator turns redwith the inlet floating 10 cm aboveflat ...

Page 9 - -2 CLEANING THE DUST PACK

8 4-2 CLEANING THE DUST PACK 1 2 4 7 8 NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. Remove the dust bin and dustpack as shown. Remove the fixed frameof the dust pack cover. Remove the sponge pad fromthe dust pack. Wash th...

Page 10 - CLEANING THE OUTLET FILTER; CLEANING THE MOTOR PROTECTION FILTER

9 6 CLEANING THE OUTLET FILTER CLICK CLICK CLICK CLICK CLICK Take out both the dust bin and thedust pack. Lift the handle. Hold the handle of theoutlet filter and liftto remove. CLICK Remove the fixedframe of the outlet filtercover. Before reassembly,align the outlet filtercover and the outlet filte...

Page 11 - - IF YOU HAVE A PROBLEM; WARNING; BATTERY TYPE : AA Size

PROBLEM CAUSE REMEDY 0 - IF YOU HAVE A PROBLEM Motor does not start. No power supply.Thermal cut-out. Check cable, plug and socket.Leave to cool. Suction force is graduallydecreasing. Nozzle, suction hose or tubeis blocked. Check for blockage andremove it. Cord does not rewind fully. Check that the ...