Samsung SC4750 - Manuals - manualsarea.com

Page 2 - safety information; SAFETY INFORMATION

02_ safety information safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly fr...

Page 3 - IMPORTANT SAFEGUARDS

safety information _03 safety information IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING : Do not use the vacuum cleaner whe...

Page 4 - contents

04_ contents contents ASSEMBLING THE CLEANER 05 OPERATING THE CLEANER 06 06 ON/OFF Switch 06 Power Cord 07 Power-Control MAINTAIN TOOLS AND FILTER 08 08 Using accessory 09 Maintain fl oor tools11 Emptying the dust bin12 When to clean the dust pack13 Cleaning the dust pack14 Cleaning the motor protec...

Page 5 - assembling the cleaner

assembling _05 01 ASSEMBLING assembling the cleaner • Please do not press the button of dust bin handle when carrying machine. • For storage, park the fl oor nozzle. OPTION • Features may vary according to model. OPTION

Page 6 - operating the cleaner; POWER CORD

06_ operating operating the cleaner ON/OFF SWITCH 1) BODY CONTROL TYPE 2) ON/OFF TYPE 3) HANDLE CONTROL TYPE • When removing the plug from the electrical outlet, grasp the plug, not the cord. POWER CORD CAUTION

Page 8 - maintain tools and fi lter; USING ACCESSORY

08_ maintain maintain tools and fi lter USING ACCESSORY Pipe (Option) • Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. • To check for blockages, separate the telescopic pipe and adjust to shorten. This allows...

Page 9 - MAINTAIN FLOOR TOOLS

maintain _09 03 MAINT AIN MAINTAIN FLOOR TOOLS 2-Step Brush (Option) • Adjust the inlet lever according to the fl oor surface. • Remove waste matter completely if the inlet is blocked. Carpet Cleaning Carpet Cleaning Floor Cleaning Floor Cleaning Pet Brush (Option) For improved pick-up of pet hair a...

Page 11 - EMPTYING THE DUST BIN

maintain _11 03 MAINT AIN EMPTYING THE DUST BIN 1. Once dust reaches the dust full mark, or sution is noticeably reduced during cleaning, empty the dust bin. 2. Take the dust bin out by pressing the button. 3. Separate the dust bin cover. 4. Throw away dust into the bin. 5. Close the dust bin cover....

Page 12 - WHEN TO CLEAN THE DUST PACK

12_ maintain maintain tools and fi lter WHEN TO CLEAN THE DUST PACK - If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. Turn the vacuum power to ‘MAX’. If suction is noticeably reduced with the inlet fl oating 10cm above fl at fl oor, clean it. When suc...

Page 13 - CLEANING THE DUST PACK

maintain _13 03 MAINT AIN CLEANING THE DUST PACK 1. Remove the dust bin and dust pack as shown. 2. Remove the sponge and fi lter from the dust pack. 3. Wash the sponge and the fi lter of the dust pack with water. 4. Let the sponge and fi lter dry in the shade for more than 12 hours. 5. Put the spong...

Page 14 - CLEANING THE MOTOR PROTECTION FILTER

14_ maintain maintain tools and fi lter CLEANING THE MOTOR PROTECTION FILTER Take out both the dust bin and the dust pack. Remove the motor protection fi lter from the vacuum cleaner.Shake and tap the dust from it and put back in machine. CLEANING THE OUTLET FILTER Replacement fi lters are available...

Page 16 - troubleshooting

troubleshooting PROBLEM SOLUTION Motor dows not start. • Check cable, pulg and socket. • Leave to cool. Suction force is gradually decreasing. • Check for blockage and remove. Cord does not rewind fully. • Pull the cord out 2-3m and push down the cord rewind button. Vacuum cleaner dows not pick up d...