Samsung F-AR09FSSSCWK1 - Manuals

English-5 PREP AR ATION 01 Do not install this appliance near a heater, inflammable material. Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak.  This may ...

English-6 Safety precautions FOR POWER SUPPLY CAUTION When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the circuit breaker.  Failing to do so may result in electric shock or fire. FOR USING WARNING If the appliance is flooded, please...

English-7 PREP AR ATION 01 Do not insert your fingers or foreign substances into the outlet when the air conditioner is operating.  Take special care that children do not injure themselves by inserting their fingers into the product. Do not touch the air flow blade with your hands or fingers during...

English-9 PREP AR ATION 01 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible...

English-10 Checking before use Operation ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. Maintaining your air conditioner  If the air conditioner operates in cooling mode for long period of time i...

English-11 PREP AR ATION 01 Checking the power consumption Smart install This function will display the amount of electricity consumed by operating the air conditioner.(You have to use the remote controller to check the power consumption but it will not be displayed on the remote controller display....

English-12 Main parts Your air conditioner may slightly look different from illustration shown below depending on your model. Checking the name of the parts Display Temperature indicator / Filter Reset indicator( ) / Defrost indicator( ) / Power consumption indicator / Auto clean indicator( ) / DRED...

English-13 PREP AR ATION 01 Checking the remote controller Remote controller buttons • Point the remote controller towards the remote controller receiver of the indoor unit.• When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit ind...

English-14 Remote controller display • The signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent lamps are in the same space. • If other electrical products operate by the remote controller, call your nearest contact center. Battery changing time...

English-15 BASIC FUNC TION 02 Basic function Basic operation is an operation mode that can be selected by pressing the Mode button. Basic function Auto(2-Step Cooling or Heat) In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature det...

English-18 Adjusting the air flow direction Air flow can be directed to your desired position. Vertical air flow Horizontal air flow Air flow blades move up and down. Air flow blades move left and right. Press the Vertical a ir swing button on the remote controller.  Air swing indicator will be on ...

English-19 AD VANCED FUNC TION 03 Using the Fast function You can set the Fast function to provide powerful cooling/heating. You can set the Comfort function to provide mild cooling/heating. • Fast function is only available in Cool/Heat mode. • If you press the Mode button while the Fast function i...

English-20 mode Before using good' sleep mode, set the current time.(For setting current time, refer to the page 21.)For a comfortable sleep, the air conditioner will operate it Fall asleep  Sound sleep  Wake up from mode. 1. Press the button on the remote controller.  indicator appears and Off t...

English-21 AD VANCED FUNC TION 03 Setting the On/Off timer You can set the air conditioner to turn on/off automatically at desired time. Setting On timer while the air conditioner is off / Off timer while the air conditioner is on 1. Press the On Timer/Off Timer button.  On/Off timer indicator will...

English-22 • On timer and Off timer setting time should be different from each other.• Press the Set/Cancel button on the remote controller while timer combination is on. Both of the On and Off timer will be canceled and the indicator will disappear. 3. Press the Set/Cancel button to activate it.  ...

English-23 AD VANCED FUNC TION 03 Using the Single User function This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode. This function will produce positive ions and supply them into the airflow. (Applicable model: AR  WK  Series) Press the Single Us...

English-24 Using the Auto Clean function Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air. This function will let the air conditioner select the operation mode automatically from Cool/Dry/Fan mode to provide refreshin...

English-25 AD VANCED FUNC TION 03 Using the Quiet function You can reduce the noise generated from an indoor unit. Press the Quiet button on the remote controller while the air conditioner is operating in Cool/Heat mode.  Quiet indicator appears on the remote controller display.  The indoor unit w...

English-26 Cleaning the air conditioner Cleaning the indoor unit Cleaning the outdoor unit heat exchanger  Wipe the surface of the unit with a slightly damp micro fiber cloth when needed.  When dust accumulates on the heat exchanger, it may decrease cooling performance. Therefore, clean it regular...

English-27 O THERS 04 Removing the Air filter There is a hole on the bottom right side of the filter. Put your finger in that hole to get a grip on the filter and slightly push it up to release the hooks from the bottom side. Then, pull it down to remove the filter from the main body. Cleaning the A...

English-28 Cleaning the air conditioner Reassembling the Air filter 1 . Put the filter on the main body and insert the hooks which are in the bottom of the Air filter into the bottom of the main body .  Air filter 2 . There’s one hook in both side of the filter, press the surface of the Air filter ...

English-29 O THERS 04 Maintaining the air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and cut-off the power supply. There ...

English-30 Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The air conditioner does not work at all. • Check power status and then operate the air conditioner again. • Plug in or switch on the circ...

English-32 Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment. • Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components.• Verify that installation and testing operations are p...

English-33 INSTALLATION 05 Installing the unit IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes.  Upon receipt, inspect the product to verify that it has not bee...

English-34 Choosing the installation location Outdoor Unit  Where it is not exposed to strong wind  Well ventilated and dustless places  Where possible keep out of sunlight and rain  Where neighbors are not annoyed by operation sound or hot air  Solid wall or support that prevents vibration and...

English-35 INSTALLATION 05 Space Requirements for Outdoor Unit When installing 1 outdoor unit 30 0 or m or e  When the air outlet is opposite the wall 15 00 o r m or e  When the air outlet is towards the wall 30 0 or m or e 150 or more 600 or more  When 3 sides of the outdoor unit are blocked by ...

English-36 (Unit : mm)  When the upper part of the outdoor unit and the air outlet is opposite the wall  When the walls are blocking front and the rear side of the outdoor units  When front and rear side of the outdoor unit is towards the wall 50 0 or m or e 300 or more 50 0 or m or e 300 or more...

English-37 INSTALLATION 05 Accessories The following accessories are supplied with the air conditioner: • The number of each accessory is indicated in parentheses. Accessories in the indoor unit case Accessories in the outdoor unit case Installation Plate (1)  09/12  (04 frame) Installation Plat...

English-38 Fixing the installation plate You can select the direction of the drain hose depending on where you want to install the indoor unit. Therefore before fixing the installation plate to a wall or a window frame, you must determine the position of the 65 mm hole through which the cable, pipe ...

English-39 INSTALLATION 05 Disassembling/Assembling the Cover panel for indoor unit installation In order to install the indoor unit, you must disassemble the cover panel first . Please proceed following instructions to disassemble and assemble the cover panel . Hooks (on the cover panel) may get da...

English-40 Disassembling/Assembling the Cover panel for indoor unit installation  Removing the hooks on the side  Removing the hooks on the central part  Caution (fragile) - Gently press the both side of the cover panel inwards ( ① ) and release the hooks on both sides( ② ) .  Caution (fragile) ...

English-41 INSTALLATION 05 Connecting the assembly cable Cable specification Model Power cable (Outdoor Unit) Interconnection cable (Indoor-Outdoor) Type GL  09/12   18/24   30  3G, 1.0 mm², H07RN-F(**09/12**) 3G, 2.5 mm², H07RN-F(**18/24**) 3G, 4.0 mm², H07RN-F(**30**) Power Supply 3 x ...

English-43 INSTALLATION 05 10. Connect the grounding conductor to the grounding terminals. 11. Close the terminal board cover by tightening the screw carefully. • In Russia and Europe, consult with the supply authority to determine the supply system impedance before installation. • Connect the wires...

English-44 Installing and connecting the assembly pipe of the indoor unit 1. Cut out the appropriate knock-out piece (A, B, C) on the rear of the indoor unit unless you connect the pipe directly from the rear. 2. Smooth the cut edges. 3. Remove the protection caps of the pipes and connect the assemb...

English-45 INSTALLATION 05 Evacuating the indoor unit • The remaining air in the Refrigeration cycle, which contains moisture, may cause malfunction on the compressor. • Always contact the service center or a professional installation agency for product installation. • To prevent dirt or foreign sub...

English-47 INSTALLATION 05 Installing and connecting the drain hose of the indoor unit The drain hose must NOT slant upwards. The end of the drain hose must NOT be placed under water. Keep a clearance of at least 5 cm between the end of the drain hose and the ground. When installing the drain hose f...

English-49 INSTALLATION 05 Installing and connecting the drain hose of the outdoor unit While heating, ice may accumulate. During the process of defrosting, check if condensation draining is adequate. For adequate draining, do the following. 1. Insert the drain plug into the drain hole on the unders...

English-50 Evacuating the connected pipes 1. Connect each assembly pipe to the appropriate valve on the outdoor unit and tighten the flare nut. 2. Tighten the flare nut first with your hands, and then with a torque wrench, applying the following torque. Outdoor unit Indoor unit Gas pipe side Liquid ...

English-52 Performing the gas leak tests C D A B Make sure to check for gas leaks before completing the installation process (connecting the assembly pipe and hose between indoor unit and outdoor unit, insulating the cables, hose and pipe, and fixing the indoor unit to the installation plate). To ch...

English-53 INSTALLATION 05 Fixing the indoor unit in place Insulation Pipes 'X' mm Rubber leg 'Y ' m m Perform the following work on the area where gas leak test was done priory.After checking for gas leaks in the system, insulate the pipe, hose and cables. Then place the indoor unit on the installa...

English-54 Smart Install mode This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the functions . Execute Smart Install mode after installation . 1 . Check the installation status of the air conditioner . 1) Check the power supply,...

English-56 Final check and trial operation To complete the installation, perform the following checks and tests to ensure that the air conditioner operates correctly. Check the followings: • Strength of the installation site • Tightness of pipe connection to detect gas leak • Electric wiring connect...

English-57 INSTALLATION 05 How to connect your extended power cables Items to prepare (compressor and insulation tape should be prepared by an installation technician.) 1. As shown in the figure, peel off the shields from the rubber/wire of the power cable. - Peel off 20 mm of the wire shields of th...

English-58 Memo Australia_A3050_IB&IM_EN_03979A-03.indd 58 2013-10-26 16:55:20

DB68-03979A-04 QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 www.samsung.com/au Australia_A3050_IB&IM_EN_03979A-04.indd 60 2013-11-7 15:44:02

AR ✴✴ FSSSBWK Series AR ✴✴ FSSSCUR Series Air Conditioner user & installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register This manual is made with 100% recycled paper. A...