Samsung AR09MSPXBWKNEU - Manuals

5 English Safety Inf ormation Safety Inf ormation The installation of this appliance must be performed by a qualified technician or service company. • Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury and may also void warranty on the installed prod...

6 English Safety Inf ormation Safety Inf ormation CAUTION Please cover the air conditioner with PE BAG after installation, and remove it when you start to run air conditioner. IInstall your appliance on a level and hard floor that can support its weight. • Failing to do so may result in abnormal vib...

7 English Safety Inf ormation Safety Inf ormation CAUTION When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the circuit breaker. • Failing to do so may result in electric shock or fire. FOR USING WARNING If the appliance is flooded, pl...

8 English Safety Inf ormation Safety Inf ormation • Especially, when you wish to install the product in an unusual location such as in an industrial area or near the seaside where it is exposed to salt in the air, please contact your nearest service centre. Do not touch the circuit breaker with wet ...

9 English Safety Inf ormation Safety Inf ormation If any foreign substance such as water has entered the appliance, cut off the power supply and contact the nearest service centre. • Failing to do so may result in electric shock or fire. Do not attempt to repair, disassemble, or modify the appliance...

10 English Safety Inf ormation Safety Inf ormation Do not spray volatile material such as insecticide onto the surface of the appliance. • As well as being harmful to humans, it may also result in electric shock, fire or problems with the product. Do not drink the water from the air conditioner. • T...

11 English Safety Inf ormation Safety Inf ormation FOR CLEANING WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance. • This may result in discolouration, deformation, damage, electric shock or fire. Before cleaning or p...

12 English At a Glanc e At a Glance 08 09 05 06 03 04 01 02 07 01 Air intake 02 Air filter 03 Air flow blade (up and down) 04 Air flow blade (left and right) 05 Room temperature sensor 06 WI-FI module 07 Wind-free panel 08 Display 09 Power button /Remote control receiver 10 (Inside) Virus doctor (AR...

13 English At a Glanc e Remote Control Overview 01 Set temperature indicator 02 Timer option indicator 03 Operation mode indicator 04 Options indicator 05 Low battery indicator 06 Transmit indicator 07 Fan speed indicator 08 Virus doctor indicator 09 Wind-free indicator 10 Vertical air swing indicat...

14 English At a Glanc e Operation modes You can change the current mode between Auto, Cool, Dry, Fan, and Heat by pressing the button. Controlling temperature You can control the temperature in each mode as follows: Mode Temperature control Auto/Cool/ Heat Adjust by 1 °C between 16 °C and 30 °C. Dry...

15 English At a Glanc e Controlling fan speed You can select the following fan speeds in each mode: Mode Available fan speeds Auto/Dry (Auto) Cool/Heat (Auto), (Low), (Med), (High), (Turbo) Fan (Low), (Med), (High), (Turbo) Controlling air flow direction Keep the air flow in a constant direction by ...

16 English Po w er Smar t F eatur es Cool mode Use the Cool mode to stay cool in hot weather. ► ► Select Cool. NOTE • For comfort, keep the temperature difference between the indoor and outdoor air within 5 °C in the Cool mode. • After selecting the Cool mode, select a function, temperature, and fan...

17 English Po w er Smar t F eatur es Wind-free Cooling function Use the Wind-free Cooling function to enjoy mild cool breeze exuding from fine holes on the wind-free panel with the air flow blade closed, instead of getting cool wind directly. The automated control of the temperature and fan speed ac...

18 English Po w er Smar t F eatur es Dry mode Use the Dry mode in rainy or humid weather. ► ► Select Dry. NOTE • The lower the set temperature is, the greater the dehumidifying capacity is. When the current humidity seems to be high, adjust the set temperature to a low temperature. • You cannot use ...

19 English Po w er Smar t F eatur es A B Heat mode Use the Heat mode to stay warm. ► ► Select Heat. NOTE • While the air conditioner warms up, the fan may not operate for about 3 to 5 minutes at the beginning to prevent cold blasts. • If the air conditioner heats insufficiently, use an additional he...

20 English Po w er Smar t F eatur es Auto mode Use the Auto mode when you want the air conditioner to automatically control the operation. The air conditioner will provide the most comfortable atmosphere that it can. ► ► Select Auto. NOTE • When the indoor temperature seems to be higher or lower tha...

21 English Po w er Smar t F eatur es NOTE • If you select the Fast function while such functions as 2-Step cooling, Wind-free Cooling, Comfort, Single user, Quiet, or good'sleep are running, these functions are cancelled. • You can change the air flow direction. • You cannot change the set temperatu...

22 English Po w er Smar t F eatur es Quiet function Use the Quiet function to reduce operating noise. You can select this function both in the Cool and Heat modes. In the Cool or Heat mode ► ► ► Select Quiet. ► NOTE • You can change the set temperature and the air flow direction. • You cannot change...

24 English Energy -Saving F eatur es Energy-Saving Operation Energy-Saving Features Electricity consumption check Use the Usage function to check the amount of electricity consumed by using the air conditioner. The amount consumed is displayed on the indoor unit display for a few seconds, and the se...

25 English Energy -Saving F eatur es NOTE • When the Single user function is turned on in the Cool mode while the set temperature is set to lower than 24 °C, the set temperature is automatically raised to 24 °C. But if the set temperature is set to between 25 °C and 30 °C, it remains the same. • Eve...

26 English Energy -Saving F eatur es good’sleep function Use the good'sleep function to get a good sleep at night and to save energy. You can select this function both in the Cool and Heat modes. In the Cool or Heat mode ► (Select among On, Off, and .) ► (Set the operation time.) ► • Press the (Time...

27 English Cl eaning and Maint enanc e Running Auto clean ● The indoor unit display shows : ● When the air conditioner is off, the Auto clean function starts immediately; when the air conditioner is in operation, the Auto clean function starts as soon as the air conditioner stops running. ● If you s...

28 English Cl eaning and Maint enanc e CAUTION • Do not clean the display by using alkaline detergent. • Do not use sulphuric acid, hydrochloric acid, or organic solvents (such as thinner, kerosene, and acetone) to clean the surfaces. Do not put any stickers on it as this can damage the surface of t...

30 English Cl eaning and Maint enanc e Problem Solution The air conditioner does not work at all. • Check the power status, then operate the air conditioner again. • Switch on the circuit breaker, plug in the power cord, then operate the air conditioner again. • Make sure that the isolator is turned...

32 English Cl eaning and Maint enanc e This product is the Smart Air conditioner which supports Samsung Smart Home Service. Detailed information can be checked at Samsung.com. Smart Home App Connecting network NOTE • This Wi-Fi Aircon support only below three encryption. – Open (No encryption), WPA/...

33 English Cl eaning and Maint enanc e Downloading Samsung Smart Home app • You can download the Samsung Smart Home app on your smart phone by searching "Samsung Smart Home" on Play store, Galaxy Apps and iPhone App Store. NOTE • Samsung Smart Home app supports android operating system 4.0(I...

35 English Cl eaning and Maint enanc e Troubleshooting Before you make a call to a service center, please check the items in the table below. Samsung Smart Home App cannot be searched on Play store, GALAXY Apps or iPhone App Store. Samsung Smart Home App supports android operating system 4.0(ICS) or...

36 English Cl eaning and Maint enanc e Reference English Hereby, Samsung Electronics, declares that the Air Conditioner is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address :The official Declaration of conformity...

5 English Installation Step 1.1 Choosing the installation location If using a multi system, install as described in the installation manual supplied with the outdoor unit. Overview of installation location requirements CAUTION CAUTION • Comply with the length and height limits described in the figur...

6 English Installation When installing more than 1 outdoor unit (5 cases) (Unit: mm) 1500 600 3000 200 3000 300 1500 600 600 1500 300 300 600 600 600 500 300 500 300 CAUTION • If the outdoor unit is installed with any insufficient clearance, it may generate sound and affect the whole product. • Be s...

7 English Installation If using a multi system, refer to the manual supplied with the outdoor unit. Optional accessories Insulated assembly pipe, Ø 6.35 mm (1) Insulated assembly pipe, Ø 9.52 mm (1) **09******* **12******* Insulated assembly pipe, Ø 12.70 mm (1) **18******* Insulated assembly pipe, ...

8 English Installation Step 1.3 Drilling a hole through the wall Before fixing the installation plate to a wall and then fixing the indoor unit to the installation plate, a window frame, or a gypsum board, you must determine the position of a hole (with 65 mm inner diameter) through which the pipe b...

9 English Installation Please scan this QR code for detail video of indoor unit installation. Step 2.1 Disassembling the cover panel 1 Remove the cap screws, then the screws. Cap screw Screw Phillips screwdriver Flat-head screwdriver 2 Unlock the side hooks ( , ), then centre hooks ( ). Then unlock ...

11 English Installation WARNING • Connect the wires firmly so that wires cannot be pulled out easily. (If they are loose, it could cause burn-out of the wires.) Step 2.4 Optional: Extending the power cable 1 Prepare the following tools. Tools Spec Shape Crimping pliers MH-14 Connection sleeve (mm) 2...

12 English Installation CAUTION • Make sure that the connection parts are not exposed to outside. • Be sure to use insulation tape and a contraction tube made of approved reinforced insulating materials that have the same level of withstand voltage with the power cable. (Comply with the local regula...

13 English Installation Step 2.7 Optional: Changing the direction of the drain hose Pour water in the direction of arrow. <Front view> <Side view> Direction of the drained water Drain pan outlet Rubber cap CAUTION • Make sure that the indoor unit is in upright position when you pour wate...

15 English Installation CAUTION • If you need a pipe longer than specified in piping codes and standards, you must add refrigerant to the pipe. Otherwise, the indoor unit may freeze. • While removing burrs, put the pipe face down to make sure that the burrs do not get in to the pipe. Liquid service ...

16 English Installation When fixing the indoor unit on a gypsum board 1 Use stud finder to find out locations of the studs. 2 Fix the plate hanger on two studs. CAUTION • If you fix the indoor unit on a gypsum board, use only specified anchor bolts on reference positions. Otherwise, the gypsum surro...

17 English Installation If using a multi system, install as described in the installation manual supplied with the outdoor unit. Step 3.1 Fixing the outdoor unit in place X Y Rubber leg 1 Place the outdoor unit as directed on the top of the unit to let the discharged air out properly. 2 Fix the outd...

18 English Installation Control box Remove the screw for the control box cover Remove the gas and liquid service port caps For connecting the refrigerant pipes Gas service port <Low pressure> Liquid service port <High pressure> Connect the gas and liquid refrigerant pipes Step 3.3 Evacua...

19 English Installation 3 Open the valve of the low pressure side of manifold gauge anticlockwise. 4 Evacuate the air in the connected pipes using the vacuum pump for about 15 minutes. • Make sure that pressure gauge shows -0.1 MPa (-76 cmHg, 5 torr) after about 10 minutes. This procedure is very im...

20 English Installation Refrigerant type GWP value R-410A 2088 • GWP=Global Warming Potential • Calculating tCO 2 e : kg x GWP / 1000 Unit Kg tCO 2 e ① , a ② , b ①+② , c NOTE a Factory refrigerant charge of the product: see unit name plate b Additional refrigerant amount charged in the field (Refer ...

21 English Installation Installation Inspection Step 4.1 Performing the gas leak tests 1 Before inspecting the leakage, use a torque wrench to close the cap for the stop valve. (Comply with a tightening torque for each size of the diameter, and tighten the cap firmly to prevent any leakage.) Tighten...

22 English Installation When error occurs, take necessary measures by referring to the following table. For more information on necessary measures for errors, refer to the service manual. Error indicator Error Measures for the installer to take Display LED Display LED 1 LED 2 LED 3 / / Communication...

23 English Installation Step 4.3 Performing final check and trial operation 1 Check the following: • Strength of the installation site • Tightness of pipe connection to detect gas leak • Electric wiring connection • Heat-resistant insulation of the pipe • Drainage • Grounding conductor connection • ...

24 English Installation Only for multi system (Wried remote controller, central remote controller etc.) 1 Turn the power off and take off the cover panel of the indoor unit. 1 2 2 Attach the Sub PCB to the Case Sub PCB. 3 Assemble the Case Sub PCB to the indoor unit. Sub PCB Case Sub PCB 4 Find the ...