Samsung AM140MNEPEH/EU - Manuals

This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line. f f Failure to do so may result in electric shock, fire, an explosion, or other problems with the product . f f Never plug the power cord into a socket that is not grounded cor...

f f Failing to do so may result in problems with the product, water leakage, electric shock, or fire . f f A delivery service for the product is not provided . If you reinstall the product in another location, additional construction expenses and an installation fee will be charged . f f Especially,...

FOR USING WARNING Do not insert your fingers or foreign substances into the outlet when the air conditioner is operating or the front panel is closing. f f Take special care that children do not injure themselves by inserting their fingers into the product . Do not touch the front panel with your ha...

FOR USING CAUTION Do not place objects or devices under the indoor unit. f f Water dripping from the indoor unit may result in fire or property damage . Check that the installation frame of the outdoor unit is not broken at least once a year. f f Failing to do so may result in injury, death or prope...

FOR CLEANING WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance. f f This may result in discoloration, deformation, damage, electric shock or fire . Before cleaning or performing maintenance, unplug the air conditioner...

Viewing your air conditioner Congratulations on the purchase of the air conditioner . We hope you enjoy the features of your air conditioner and stay cool or warm with optimal efficiency .Please read the user manual to get started and to make the best use of the air conditioner . Air Duct Type Air i...

Wire Remote Controller (Optional) Display ③ ①② ⑰ ⑯ ⑮ ⑭ ⑱ Operation On/Off button LED Indicator (Green : Normal / Red : Need to be checked) Temperature Setting Button ④ ⑤ ⑨ ⑩ ⑪ ⑫ ⑬ ⑥ ⑧    ⑲ ⑳ ⑦ • Without opening the cover of your Wired Remote Controller, you can turn the air-conditioner power On/O...

Wire Remote Controller (Optional) Buttons ③ ⑥ ① ⑧ ⑨ ⑫ ⑤ ②  ⑬ ⑱  ⑮  ⑳ ⑪ ⑯ ⑲ ⑩ ⑰ ⑭   ④ ⑦ Classification Button Function Air Conditioner Related Information Operation On/Off button Turns the air conditioner power On/Off Mode button Selects the desired air conditioner operation Temperature setting...

Appendix Troubleshooting Refer to the following chart if the air conditioner operates abnormally . This may save time and unnecessary expenses . PROBLEM SOLUTION The air conditioner does not operate immediately after it has been restarted. • Because of a protective mechanism, the appliance may not s...

PROBLEM SOLUTION The air conditioner does not turn on or off with the wired remote control. • Check if you set the wired remote control for group control . If the wired remote controller is used for group control, air conditioners connected to that wired remote controller will turn on or off in sequ...

Indoor Unit Installation • Indoor Unit Lifting 1) Please use such tools as the pulley to lift the indoor unit to the draw bolts . 2) Please use such tools as the level gauge to adjust the indoor unit to the level, otherwise, water leak may occur . • Piping• When the pipe goes through the wall, wall ...

Performing Leak Test & Insulation Leak test LEAK TEST WITH NITROGEN(before opening valves) In order to detect basic refrigerant leaks, before recreating the vacuum and recirculating the R-410A, it’s responsible of installer to pressurize the whole system with nitrogen(using a pressure regulator)...

Drain pipe and Drain Hose Installation Care must be taken when installing the drain hose for the indoor unit to ensure that any condensation is correctly drained outside . The drain hose can be installed to the left or right side of the base pan . 1. Install the drain hose as short as possible .• In...

Drain pipe and Drain Hose Installation Drainpipe connection Without the drain pump 1 . Install horizontal drain pipe with a slope of 1/100 or more and fix it by hanger space of 1 .0~1 .5m . 2 . Install U-trap at the end of the drainpipe to prevent odors reaching the indoor unit .3 . Do not install t...

Centralized drainage Without the drain pump 1 . Install horizontal drainpipe with a slope of 1/100 or more and fix it by hanger space of 1 .0~1 .5m .2 . Install U-trap at the end of the drainpipe to prevent odors reaching the indoor unit .3 . The drain pipe should not be installed at an upward posit...

Wiring Work Power and communication cable connection 1 . Before wiring work, you must turn off all power source . 2 . Indoor unit power should be supplied through the breaker (MCCB: Molded Case Circuit Breaker, ELB: Earth Leakage Breaker, ELCB: Earth Leakage Circuit Breaker) separated by the outdoor...

220 V - 240 V~ Indoor unit 1 Indoor unit 2 Fresh Duct 1 Wired remote controller ELB MCCB ELCB MCCB or ❋ ❋ ELCB : Essential installation . Outdoor unit Wired remote controller • Power off before connecting any wire . Indoor PBA will be damaged if V1, V2, F3, F4 are shorted out . WARNING • If indoor u...

Wiring Work Selecting compressed ring terminal Silver solder Norminal dimensions for cable (mm 2 ) 1 .5 2 .5 4 Norminal dimensions for screw (mm) 4 4 4 4 4 B Standard dimension (mm) 6 .6 8 6 .6 8 .5 9 .5 Allowance (mm) ±0 .2 ±0 .2 ±0 .2 D Standard dimension (mm) 3 .4 4 .2 5 .6 Allowance (mm) +0 .3 -...

Setting an indoor unit address and installation option Set the indoor unit address and installation option with remote controller option .Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting option at the same time . You need to set twice when ...

Setting an indoor unit installation option (suitable for the condition of each installation location) 1 . Check whether power is supplied or not . f f When the indoor unit is not plugged in, there should be additional power supply in the indoor unit . 2 . The panel(display) should be connected to an...

Changing a particular option You can change each digit of set option . Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Explanation PAGE MODE - - - - Indication and Details Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details 0 D - - - - - - - - • Whe...

Air conditioner User manual AM  MNEPEH  • Thank you for purchasing this Samsung air conditioner . • Before operating this unit, please read this user manual carefully and retain it for future reference .

7 AA ENGLISH Preparations for Installation Optional accessories ❇ ❇ The following accessories are needed when connecting the outdoor and indoor unit. Model Model Total capacity Y-joint MXJ-YA1509M 15.0 kW and below MXJ-YA2512M Over 15.0 kW ~ 40.0 kW and below Distribution header MXJ-HA2512M 45.0 kW ...

AA 10 X f Make a space for ventilation and service as seen in the picture. X f When multiple outdoor units are combined for installation,allow enough space for ventilation against a wall.If the ventilation space is not allowed,product malfunction may occur. X f The side with logo is the front side o...

11 ENGLISH Unit: mm When installing an outdoor unit ❇ ❇ When the air outlet is opposite the wall ❇ ❇ When the air outlet is toward the wall 300 or mor e 1500 or mor e ❇ ❇ When 3 sides of the outdoor unit are blocked by the wall ❇ ❇ The upper part of the outdoor unit is blocked and the air outlet is ...

AA 12 When installing more than 1 outdoor unit ❇ ❇ When 3 sides of the outdoor unit are blocked by the wall 300 or mor e 300 or more 600 or more 600 or more 600 or more ❇ ❇ When the walls are blocking front and the rear of the outdoor units 300 or mor e 1500 or mor e 600 or more 600 or more ❇ ❇ When...

13 ENGLISH Moving the outdoor unit X f Select the moving path in advance. X f Be sure that moving path can support weight of the outdoor unit. X f Do not slant the product more than 30˚ when carrying it. (Do not lay the product down in sideways.) X f Surface of the heat exchanger is sharp. Be carefu...

AA 14 Unit: mm Outdoor unit Anchor bolt Nut, Spring wahser H-beam Square pad A+10~20mm or more A 20mm 75mm or more Base construction and installation of the outdoor unit 1. Install the outdoor unit 150mm higher than the base ground and install the drain hole to connect the pipe to the drainage. 2. W...

15 ENGLISH Base ground contruction (when Installing on the ground) Drain hole 150 mm or more X X When the outdoor unit needs to be supported,fix it with wire as shown in the picture. - Slightly unwind the four screws on the cover top of the outdoor unit. - Wind wires round the four screws and fasten...

17 AA ENGLISH X f The length of refrigerant pipe should be as short as possible and the height difference between an indoor and outdoor unit should be minimized. X f Piping work must be done within allowable piping length, height difference, and the allowable length after branching. X f The pressure o...

AA 18 X f Install the refrigerant pipe according to main pipe size of each outdoor unit capacity. X f When the pipe length (including elbow) between an outdoor unit and the farthest indoor unit exceeds 90m, you must increase the size of the gas pipe (main pipe) by one grade which connects between th...

19 ENGLISH X X Basic refrigerant The basic amount of refrigerant charged at a factory Outdoor unit (Series) Factory charge (kg) Connect maximum number of indoor (unit) AM080  XMDG  3.7 13 AM090FXMDG  3.7 14 X X Amount of additional refrigerant depending on the pipe size. Amount of additional refr...

AA 20 Installation of Air-conditioner m 0 1 * 2 5 . 9 Ø 5 3 6 Ø m 0 1 * m 5 * 2 5 . 9 Ø 6 Ø . 5 3 * m 0 1 * H E D T N F 6 3 0 M A * H E D 4 N F 1 7 0 M A m 5 * 2 5 . 9 Ø m 5 * 5 3 . 6 Ø m 5 * 5 3 . 6 Ø * H E D 4 N F 5 4 0 M A * H E D T N F 6 3 0 M A m 0 1 * 5 3 . 6 Ø m 5 * 5 3 . 6 Ø * H E D T N F 6 ...

21 ENGLISH To prevent foreign materials or water from entering the pipe, storing method and sealing method (especially during installation)is very important. Apply correct sealing method depending on the environment. Exposure place Exposure time Sealing type Outdoor Longer than one month Pipe pinch ...

AA 22 Refrigerant pipe brazing and safety information Important information for refrigerant pipe work• Make sure there is no moisture inside the pipe.• Make sure there are no foreign substances and impurities in the pipe.• Make sure there is no leakage.• Make sure to follow the instruction when weld...

23 ENGLISH Cutting or flaring the pipes Caution • If foreign matters or burrs are not removed after cutting pipe, refrigerant gas may leak.• If foreign matters enter inside the pipe, important interior parts of the unit may get damaged or product efficiency will be reduced. So, the direction of pipe s...

AA 24 Connecting the flared pipes X f Check if the flaring is properly done according to the standard size. X f Align the center of the piping and tighten the flare nut with your hands. Then, tighten the flare nut with torque wrench in a direction of the arrow indicated in below illustration. X f Ma...

25 ENGLISH Pipe installation for an outdoor unit 1. Pipe direction The refrigerant pipe can be pulled out from front, flank, rear, and bottom side, so install it depending on the installation site condition. 2. Outdoor unit refrigerant pipe connection Classification Front, flank, rear side of pipe c...

AA 26 Connecting the drain hose to the outdoor unit When using the air conditioner in the heating mode, ice may accumulate . During de-icing (defrost operation), thecondensed water must be drained off safely. Consequently, you must install a drain hose on the outdoor unit, following theinstructions b...

27 ENGLISH Examples of refrigerant pipe installation ❇ ❇ Using Y-joint ❇ ❇ Using Y-joint / EEV kit ❇ ❇ Using distribution header ❇ ❇ Using distribution header / Y-joint

AA 30 Installation of refrigerant Y-joint Install the Y-joint horizontally or vertically. ❇ ❇ Install horizontally ❇ ❇ Install vertically X f When using A-J type of Y-joint,connect the Y-joint to the pipe with the provided reducer. X f When using K-Z type of Y-joint,connect the Y-joint to the pipe b...

32 AA Caution • Connect the indoor units in order, while respecting the direction of the arrow shown in the illustration.• When indoor units are connected to same distribution head, indoor unit must be connected in order of their capacity, from largest to smallest. 3) Install the distribution header...

33 AA ENGLISH DVM S ECO Series Wiring work Caution Caution for electrical work• You must install ELCB or MCCB + ELB - ELCB: Earth leakage breaker - MCCB: Molded case circuit breaker - ELB: Earth leakage breaker • Do not operate the outdoor unit before completing the• refrigerant pipe work. • Do not ...

AA 34 Wiring work Caution Caution for perforating the knock-out hole• Perforate a knock-out hole by punching it with a hammer. • After perforating the knock-out hole, apply rust resisting paint around the hole. • When you need to pass the cables through the knock-out hole, remove burrs on the hole a...

35 ENGLISH Power wiring Diagram Distribution Circuit Board Outdoor Unit Indoor Unit Communication Cable Wired remote controller Grounding 1 phase 2 wire 220V – 240V MCCB + ELB ELCB Or MCCB + ELB ELCB Or Grounding 3 phase 4 wire (380V-415V~) Supplying 3phase 4wire(380-415V~) X f Connect a power cable...

AA 36 Connecting the power terminal X f Connect the cables to the terminal board with solderless ring terminals. X f Properly connect the cables by using certified and rated cables and make sure to fix them properly so that external force is not applied to the terminal. X f Use a driver and wrench t...

37 ENGLISH 1. Adjust the blade position by coin. (Controller is at the bottom side of the tool.) Fix the blade position according to the outer sheath thickness of the power cable. 2. Fix the power cable and tool by using the hook at the top side of the tool. 3. Cut out the outer sheath of the power ...

AA 38 Installing grounding wire X f Grounding must be done by a qualified installer for you safety. X f Use the grouding wire by referring to the specification of the electric cable of the outdoor unit. 1) Grounding the power cable X f The standard of grounding may vary according to the rated voltag...

AA 40 Air tightness test and Vacuum drying Air Tightness X f Use tools for R-410A to prevent the inflow of foreign substances and resist against the internal pressure. X f Do not remove the core of filling port. X f Use Nitrogen gas for air tightness test as shown in the illustration. Caution Apply ...

41 ENGLISH X f Use tools for R-410A to prevent the inflow of foreign substances and resist against the internal pressure. X f Use vacuum pump that allows vacuuming under -100.7kPa (5 Torr). X f Use the vacuum pump with the check valve to prevent pump oil from flowing backward while the vacuum pump i...

AA 42 Charging refrigerant Important information regulation regarding the refrigerant used This product contains fluorinated greenhouse gases. Do not vent gases into the atmosphere. Caution • Inform user if the system contains 5 tCO2e or more of fluorinated greenhouse gases. In this case, it must be...

AA 44 Insulating the refrigerant pipes and branch joints X f Check for gas leakage before completing (the hose and pipe insulation) and if there is no sign of leakage, make sure to insulate the pipes and hoses. X f Use EPDM material insulator that meets the following conditions. Test item Unit Stand...

45 ENGLISH Caution • Install the insulation without any gaps or cracks and use adhesive on the connection part of it to prevent moisture from entering. • Bind the refrigerant pipe with insulation tape if it is exposed to outside sunlight. (When binding the pipe with finishing tape, be careful not to...

AA 46 Pipe insulation X f Fix the distribution header with a cable tie and cover the connected part. X f Insulate the distribution header and the welded part and wrap the connected part with an adhesive insulation tape to prevent dew formation. Insulation Adhesive insulation tape Insulate the refrig...

47 ENGLISH Insulating the pipe located inside of the outdoor unit X f With a pipe insulator, insulate the pipe up to whole service valve located inside of the outdoor unit. X f Seal the gap between the outdoor unit pipe and the insulator. Rainwater and dewdrops may soak through the gap between the p...

48 AA Basic segment display Step Display content Display At initial power input Checking segment display SEG 1 SEG 2 SEG 3 SEG 4 “ 8 ” “ 8 ” “ 8 ” “ 8 ” While setting communication between indoor and outdoor unit (Addressing) Number of connected indoor units SEG 1 SEG 2 SEG 3 SEG 4 “ A ” “ d ” Numbe...

49 AA ENGLISH Switch Setting Function Remarks SW53 K5 On — Not applicable Off — K6 On Enable maximum capacity restriction for cooling operation Restrict excessive capacity increase when operating indoor units with small capacity Off Disable maximum capacity restriction for cooling operation — K7 On ...

50 AA Setting outdoor unit option switch and key function Setting total number of installed indoor units using K1~K4 1. In the initial, display will show the following. 2. Press and hold simultaneously K1, K2 to enter the setting mode. If you enter the setting mode, display will show the following. ...

51 ENGLISH K1 K2 K3 K4 Installing and setting the option with tact switch and explanation of the functions □ Setting the option (1) Press and hold K2 to enter the option setting. (Only available when the operation is stopped) - If you enter the option setting, display will show the following. - Seg ...

AA 54 K1(Number of press) KEY operation Display on segment 1 time Refrigerant charging in Heating mode (Note 1) ““ K ” ” 1 ” “ BLANK ” “ BLANK ” 2 times Trial operation in Heating mode (Note 1) “ K ” ” 2 ” “ BLANK ” “ BLANK ” 3 times Pump out in Heating mode (Note 1) “ K ” ” 3 ” “ BLANK ” “ 1 ” 4 ti...

57 AA ENGLISH 1. Before supplying the power, use DC 500 V insulation resistance tester to measure the power (3 phase: R, S, T/ 1 phase: L, N) terminal and the outdoor unit grounding. - Measurement should be over 30M Ω . 2. Before supplying the power, use a voltmeter and phase tester to check the vol...

59 AA ENGLISH Inspection & test operation Caution Precautions before test operation • When the outdoor temperature is low, turn on the main power 6 hours before beginning the operation. - If you start the operation immediately after turning on the main power, it may cause serious damage to the p...

60 AA 1. If the Auto Trial Operation is not completed, normal operation will be prohibited. - When the auto trial operation is not completed, UP (UnPrepared) will appear on the segment after the communication check and restrict compressor from operating. (UP Mode will be cleared automatically when a...

61 AA ENGLISH Measure to take when E503 error occurs Inspection & trial operation ❇ ❇ Symptoms for abnormal operation of the 4way valve - Refrigerant noise is increased while compressor operatres and suction temperature remains over 20 ° C compared to low pressure's saturation temperature. - Tem...

AA 62 Automatic refrigerant amount detection function This function detects amount of refrigerant in the system through refrigerant amount detection operation. Start Press the Tact switch "K2" 5 times Check the amount of refrigerant Judge the amount of refrigerant Judgment on the amount of r...

63 ENGLISH Caution • If the temperature is out of the guaranteed range below, exact result will not be obtained. - Indoor: 20~32 ° C - Outdoor: 5~43 ° C • If the operation cycle is not stable, the operation of refrigerant amount check may be forcibly finished.• Accuracy of the result may decrease if...

DVM S ECO : AM ✴✴✴✴ XMDG Series imagine the possibilities Thank you for purchasing this Samsung product. Air Conditioner Installation manual