Samsung AM015TNVDKH/UK - Manuals

6 Safety Information English Safety Information Safety Information FOR INSTALLATION WARNING Use the power line with the power specifications of the product or higher and use the power line for this appliance only. In addition, do not use an extension line. • Extending the power line may result in el...

7 English Safety Information Safety Information Never install the outdoor unit in a location such as on a high external wall where it could fall. • If the outdoor unit falls, it may result in injury, death or property damage. This appliance must be properly grounded. Do not ground the appliance to a...

8 Safety Information English Safety Information Safety Information Do not install the product in a place where thermo-hygrostat is needed (such as server room, machinery room, computer room, etc.) • Those places do not provide guaranteed operation condition of the product therefore performance can b...

9 English Safety Information Safety Information FOR USING WARNING If the appliance is flooded, please contact your nearest service centre. • Failing to do so may result in electric shock or fire. If the appliance generates a strange noise, a burning smell or smoke, cut off the power supply immediate...

14 Safety Information English Safety Information Safety Information FOR CLEANING WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner, alcohol or acetone to clean the appliance. • This may result in discolouration, deformation, damage, electric shock or ...

15 English At a Glanc e At a Glanc e Indoor Unit Overview (WindFree) The appearance of the actual product may differ slightly from the image below. 01 02 03 08 04 05 07 06 01 Air intake 02 Air filter 03 WindFree panel 04 Airflow blade (up and down) 05 Airflow blade (left and right) 06 Power button/R...

16 English At a Glanc e At a Glanc e 01 02 03 08 04 05 07 06 01 Air intake 02 Air filter 03 Front panel 04 Airflow blade (up and down) 05 Airflow blade (left and right) 06 Power button/Remote control receiver 07 Room temperature sensor 08 Display Display 01 02 01 Temperature indicator (numeric) Filt...

17 English Cl eaning and Maint enanc e Cl eaning and Maint enanc e Cleaning the outside of the indoor unit Tepid damp cloth Soft brush 1 Turn off the air conditioner and wait until the fan stops. 2 Disconnect the power supply. 3 Use a soft brush or tepid damp cloth to clean the exterior. WARNING • D...

18 English Cl eaning and Maint enanc e Cl eaning and Maint enanc e Cleaning the filter Clean the air filter every two weeks or when the (filter-cleaning reminder) appears on the indoor unit display. The time between cleanings may vary, depending on the usage and environmental conditions. Vacuum clea...

19 English Cl eaning and Maint enanc e Cl eaning and Maint enanc e Cleaning the WindFree panel Clean the WindFree panel at least once a month. 1 Pull the airflow blade open. 2 Hold and pull both sides of the WindFree panel until it comes free from the air conditioner. 3 Use a soft brush or vacuum cl...

20 Maintaining the Air Conditioner English Cl eaning and Maint enanc e Cl eaning and Maint enanc e If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain in best conditions. 1 Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 ...

21 English Cl eaning and Maint enanc e Cl eaning and Maint enanc e Internal protections via the unit control system This internal protection operates if an internal fault occurs in the air conditioner. Type Description Against cold air The internal fan will be off against cold air when the heat pump...

22 Troubleshooting English Appendix Appendix Appendix Appendix Problem Solution The air conditioner does not operate immediately after it has been restarted. • Because of the protective mechanism, the appliance does not start operating immediately to keep the unit from overloading. The air condition...

24 Operation Ranges English Appendix Appendix Appendix Appendix Operation Ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. MODE OPERATIONAL TEMPERATURE INDOOR HUMIDITY IF OUT OF CONDITIONS INDOOR OU...

25 English Appendix Appendix Appendix Appendix Model specification (Dimension and weight) Dimension and weight Type Model Net dimension (WxDxH) (mm) Net weight (kg) Indoor unit AM015TNADKH 820x299x215 8.5 AM022TNADKH 820x299x215 8.5 AM028TNADKH 820x299x215 9.0 AM036TNADKH 820x299x215 9.0 AM045TNADKH...

5 English Installation Pr oc edur e Step 1 Checking and preparing accessories The following accessories are supplied with the indoor unit.The type and quantity may differ depending on the specifications. Installation plate Installation manual User manual PE indoor unit cover Step 2 Selecting the ins...

6 Installation Procedure English Installation Pr oc edur e Step 3 Installing the indoor unit Before fixing the installation plate to the wall or window frame, you must determine the position of the 65 mm hole through which the cable, pipe and hose pass to connect the indoor unit to the outdoor unit....

7 English Installation Pr oc edur e Step 5 Connecting the refrigerant pipe Connect indoor and outdoor units with field-supplied copper pipes by means of flare connections. Use insulated seamless refrigeration grade pipe only, (Cu DHP type according to ISO1337), degreased and deoxidized, suitable for...

8 Installation Procedure English Installation Pr oc edur e Step 6 Cutting or flaring the pipes 1 Make sure that you prepared the required tools. (pipe cutter, reamer, flaring tool and pipe holder) 2 If you want to shorten the pipe, cut it using a pipe cutter ensuring that the cut edge remains at 90°...

9 English Installation Pr oc edur e Step 7 Performing leak test Leak test LEAK TEST WITH NITROGEN (before opening valves) In order to detect basic refrigerant leaks, before recreating the vacuum and recirculating the R410A, it’s responsible of installer to pressurize the whole system with nitrogen (...

10 Installation Procedure English Installation Pr oc edur e Step 9 Installing the drain hose When installing the drain hose for the indoor unit, check if condensation draining is adequate. When passing the drain hose through the 65-mm hole drilled in the wall, check the following: The hose must NOT ...

11 English Installation Pr oc edur e Step 11 Connecting the power and communication cables 1 Before wiring work, you must turn off all power source. 2 Indoor unit power should be supplied through the breaker (ELCB or MCCB+ELB) separated by the outdoor power. • ELCB:Earth Leakage Circuit Breaker • MC...

12 Installation Procedure English Installation Pr oc edur e Ring terminal selection B d1 D d2 t F L E Silver solder R 2 B Norminal dimensions for cable (mm²) Norminal dimensions for screw (mm) B C d1 E F L d2 t Standard dimension (mm) Allowance (mm) Standard dimension (mm) Allowance (mm) Standard di...

13 English Installation Pr oc edur e Example of Installation ‐ Total power cable length L = 100(m), Running current of each units 1[A] ‐ Total 10 indoor units were installed ELCB 10[A] 0[m] 10[m] 20[m] 100[m] Indoor unit 1 Indoor unit 2 Indoor unit 10 9[A] 1[A] or MCCB+ ELB • Apply following equatio...

14 Installation Procedure English Installation Pr oc edur e • You must keep the cable in a protection tube. • Keep distances of 50mm or more between power cable and communication cable. • Maximum length of power cables are decided within 10% of power drop. If it exceeds, you must consider another po...

16 Installation Procedure English Installation Pr oc edur e Step 13 Setting an indoor unit address and installation option Set the indoor unit address and installation option with remote control option. Set the each option separately since you cannot set the ADDRESS setting and indoor unit installat...

21 English Installation Pr oc edur e 02 series installation option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 0 2 - External room temperature sensor / Minimizing fan operation when thermostat is off Central control - SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 1 Use of drain pump - - EEV Step when heating stops Dew removal...

26 Installation Procedure English Installation Pr oc edur e 05 series installation option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 0 5 Use of Auto Change Over for HR only in Auto mode / Use of Cooling only indoor unit of HR (When setting SEG3) Standard heating temp. Offset (When setting SEG3) Standard cooling ...

30 Installation Procedure English Installation Pr oc edur e Changing a particular option You can change each digit of set option. Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Explanation PAGE MODE The option mode you want to change The tens’ digit of an option SEG you will change The unit digit of an option...

31 English Installation Pr oc edur e Step 14 Performing the final check To complete the installation, perform the following checks and tests to ensure that the air conditioner operates correctly. 1 Check the following: • Strength of the installation site • Tightness of pipe connection to detect gas ...

32 English Appendix If a problem occurs to the air conditioner, the following error codes will appear on the display of the indoor unit or outdoor unit. Error detection and re-operation • If an error occurs during operation, an error code will appear and all the operations are stopped except the dis...