Samsung AM015HNQDEH/EU - Manuals

Samsung AM015HNQDEH/EU Air Conditioner – User Manual in PDF format online.

Manuals:

User Manual

User Manual Samsung AM015HNQDEH/EU

Summary

Page 2 - features; features of your new; Cool Summer Offer

02_ features For easy future reference write the model and serial number down. You will find your model number on the right side of the air conditioner. Model # Serial # features of your new air conditioner • Cool Summer Offer On those hot sweltering summer days and long restless nights, there is no...

Page 3 - safety information; SAFETY INFORMATION; WARNING; Hazards or unsafe practices that may result in; CAUTION; Hazards or unsafe practices that may result in; CAUTION

safety information _03 ENGLISH safety information To prevent electric shock, disconnect the power before servicing, cleaning, and installing the air conditioner . SAFETY INFORMATION Before using your new air conditioner, please read this manual thoroughly to ensure that you know how to safely and ef...

Page 4 - SEVERE WARNING SIGNS; • Potential risk of fire hazard or explosion.

04_ safety information safety information SEVERE WARNING SIGNS Do not place the air conditioner near hazardous substances or equipment that releases free flames to avoid fire, explosions or injuries. • Potential risk of fire hazard or explosion. Do not install the outdoor unit at an unstable place o...

Page 5 - Do not clean the interior of air conditioner on your own.

safety information _05 ENGLISH Make sure that children take precautions against access to the air conditioner and they do not play with the unit. Do not clean the interior of air conditioner on your own. • You may damage the parts which can cause electric shock or fire • Consult contact center for c...

Page 6 - Improper electrical grounding may cause electric shock or fire.; CAUTION SIGNS; are attempted by a non-qualified service technician.

06_ safety information safety information SEVERE WARNING SIGNS (CONT’D) Use a receptacle that has a ground terminal. The receptacle must be used exclusively for the air conditioner. • Improper electrical grounding may cause electric shock or fire. Be sure to ground the unit. Do not connect the groun...

Page 7 - the ballast of the lighting apparatus.

safety information _07 ENGLISH Do not touch the pipe connected to the air conditioner.Install the indoor unit away from lighting apparatus using the ballast. • If you use the wireless remote control, reception error may occur due to the ballast of the lighting apparatus. Install the outdoor unit whe...

Page 8 - Potential risk of fire or loss of property.; a contact; • Potential risk of fire or electric shock.

08_ safety information safety information CAUTION SIGNS (CONT’D) Inspect the condition, electric connections, pipes and external case of the air conditioner regularly by a qualified service technician.Do not open doors and windows in the room being cooled during operation unless necessary.Do not blo...

Page 9 - contents

contents _09 ENGLISH USING ADVANCED FUNCTIONS 16 16 Turbo operation16 Air swing17 operation 18 Setting the On/Off timer CLEANING AND MAINTAINING THE AIR CONDITIONER 19 19 Cleaning the exterior19 Cleaning the filter 19 Air filter 20 Bio filter 21 Replacing the filter 21 Deodorizing filter 22 Maintain...

Page 10 - viewing; viewing your air conditioner; when you start to run air conditioner.; CHECKING THE INDOOR UNIT AND DISPLAY; Main parts

10_ viewing viewing your air conditioner • Please cover the air conditioner with PE BAG after installation, and remove it when you start to run air conditioner. CAUTION Congratulations on the purchase of the air conditioner. We hope you enjoy the features of your air conditioner and stay cool or war...

Page 11 - REMOVING THE FRONT PANEL; Power button and Room temperature sensor

viewing _11 ENGLISH REMOVING THE FRONT PANEL Tightly grab both side of the front panel and lift up the panel to open. Then slide the panel towards to remove the panel. Power button and Room temperature sensor You may locate the Power button on the right bottom side of the air conditioner. If the fro...

Page 12 - REMOTE CONTROLLER BUTTONS

12_ viewing viewing your air conditioner • Point the remote controller towards the remote controller receiver of the indoor unit.• When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator( ) appears on the remote controller d...

Page 13 - REMOTE CONTROLLER INDICATORS; Battery changing time; Storing the remote controller; Inserting the batteries

viewing _13 ENGLISH REMOTE CONTROLLER INDICATORS Operation mode indicator Heat mode* is applicable . Set temperature & On/ Off set time indicator On/Off timer indicator Room & Blade selection indicator Transmission indicator 2 nd F indicator Air swing indicator Fan speed indicator Auto (Turb...

Page 14 - operating; Auto; Cool; Dry; Operating basic function; SELECTING OPERATION MODE

14_ operating Auto In Auto mode, the air conditioner will automatically set the temperature and fan speed to maintain your fresh environment. • When the indoor temperature is too high, the powerful cool breeze is generated and when the indoor becomes cool enough, the soft breeze is generated. Cool C...

Page 15 - Press the

operating _15 ENGLISH Press the button to turn on the air conditioner. Press the button to set the operating mode. • Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat. • Heat mode operates only with MR-DH00 model. Press the button to set the desired ...

Page 16 - Press; Using advanced function; Turbo operation

16_ operating Turbo function will be helpful to cool or heat your room quickly and effectively. Press the button on the remote controller in the Cool/Heat mode.  Turbo indicator appears( ) on the remote controller display and the air conditioner operates in Turbo function for 30 minutes.  If you p...

Page 17 - Temperature and fan speed changes in; When the air conditioner is on and in cool mode.; good’ sleep operation

operating _17 ENGLISH For a comfortable sleep, the air conditioner will operate in Fall asleep  Sound sleep  Wake up from good’ sleep mode. 1. Press the button on the remote controller to select the good’ sleep operation.  indicator appears and off timer indicator starts blinking on the remote co...

Page 18 - Setting On timer and Off timer simultaneously; Setting the On/Off timer

18_ operating Additional options available in On timer mode You can select from (Auto)  (Cool)  (Dry)  (Fan)  (Heat). (Heat mode is applicable to MR-DH00/DH00U model only.) You can adjust the temperature in Auto/Cool/Dry/Heat modeHowever, you cannot adjust the temperature in fan mode.(Heat mode ...

Page 19 - cleaning and maintaining; cleaning and maintaining the; CLEANING THE EXTERIOR; CLEANING THE FILTER; Air filter

cleaning and maintaining _19 ENGLISH cleaning and maintaining the air conditioner CLEANING THE EXTERIOR 1. Wipe the surface of the unit with a slightly wet or dry cloth when needed. Do not use Benzene, Thinner or Clorox TM . They may damage the surface of the air conditioner and can create a risk of...

Page 20 - Bio filter

20_ cleaning and maintaining Bio filter Washable foam based Bio filter leads to reduction in allergens that thrive in polluted air. The filter is cleaned with a vacuum or by hand washing. 1. Remove the front panel. Tightly grab both side of the front panel and lift up the panel to open. Then slide t...

Page 21 - REPLACING THE FILTER; Deodorizing filter

cleaning and maintaining _21 ENGLISH REPLACING THE FILTER Replacement filter may be purchased from the retail store or ordered from the dealer where you purchased the unit. If you cannot find one, please call a contact center. Deodorizing filter Deodorizing filter absorbs efficiently cigarette smoke...

Page 22 - MAINTAINING YOUR AIR CONDITIONER; Periodical checks

22_ cleaning and maintaining cleaning and maintaining the air conditioner MAINTAINING YOUR AIR CONDITIONER If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 1. Dry the air conditioner thoroughly by operating in Fan mode ...

Page 23 - Internal protections via the unit control system

cleaning and maintaining _23 ENGLISH MAINTAINING YOUR AIR CONDITIONER Internal protections via the unit control system This internal protection operates if an internal fault occurs in the air conditioner. Type Description Against cold air The internal fan will be off to against cold air when the hea...

Page 24 - appendix; TROUBLESHOOTING

24_ appendix appendix TROUBLESHOOTING Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The air conditioner does not operate immediately after it has been restarted. • Because of the protective mechanism, the applia...

Page 25 - OPERATION RANGES; Model specification (Dimension and weight)

appendix _25 ENGLISH OPERATION RANGES The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. MODE OPERATIONAL TEMPERATURE INDOOR HUMIDITY IF OUT OF CONDITIONS INDOOR OUTDOOR COOLING 16˚C to 32˚C -5˚C to 48˚ 80% ...

Page 26 - installing your air conditioner; Performing Leak Test & Insulation; Leak test; Fixing the Installation Plate; Installation Part; Insulation

26_ installing your air conditioner Performing Leak Test & Insulation g The designs and shape are subject to change according to the model. LEAK TEST WITH NITROGEN(before opening valves) In order to detect basic refrigerant leaks, before recreating the vacuum and recirculating the R410A, it’s re...

Page 27 - Installing and Connecting the Drain

installing your air conditioner _27 ENGLISH 7. Attach the pipe to the wall using clamps(optional). 8. Select the insulation of the refrigerant pipe.  Insulate the gas side and liquid side pipe referring to the thickness according to the pipe size.  The thickness according to the pipe size is a sta...

Page 28 - Wiring Work; Selecting compressed ring terminal; Drain hose installation; Changing Direction of the Drain Hose; Power and communication cable connection

28_ installing your air conditioner Wiring Work Silver solder Selecting compressed ring terminal Norminal dimensions for cable (mm 2 ) Norminal dimensions for screw (mm) B D d1 E F L d2 t Standard dimension (mm) Allowance (mm) Standard dimension (mm) Allowance (mm) Standard dimension (mm) Allowance ...

Page 29 - The procedure of option setting; Setting an indoor unit address and installation option

installing your air conditioner _29 ENGLISH Set the indoor unit address and installation option with remote controller option. Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting option at the same time. You need to set twice when setting indo...

Page 30 - Setting an indoor unit address and installation option(Cont.)

30_ installing your air conditioner Option setting Status 1. Setting SEG2, SEG3 option Press Low Fan button( ∨ ) to enter SEG2 value. Press High Fan button( ∧ ) to enter SEG3 value. Each time you press the button,   …  will be selected in rotation. 2. Setting Cool mode Press Mode button to be cha...

Page 32 - Setting an indoor unit address and installation option (Cont.)

32_ installing your air conditioner 1. Check whether power is supplied or not. - When the indoor unit is not plugged in, there should be additional power supply in the indoor unit. 2. The panel(display) should be connected to an indoor unit to receive option. 3. Before installing the indoor unit, as...

Page 33 - 2 series installation option

installing your air conditioner _33 ENGLISH 1. Check whether power is supplied or not. - When the indoor unit is not plugged in, there should be additional power supply in the indoor unit. 2. The panel(display) should be connected to an indoor unit to receive option. 3. Set the installation option a...

Page 39 - Changing a particular option

installing your air conditioner _39 ENGLISH Setting an indoor unit address and installation option (Cont.) Changing a particular option Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Explanation PAGE MODE The option mode you want to change The tens’ digit of an option SEG you will change The unit digit of an ...

Page 40 - QUESTIONS OR COMMENTS?

QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRIA 0800-SAMSUNG (0800-7267864)[Only for Premium HA] 0800-366661[Only for Dealers] 0810-112233 www.samsung.com/at/support BELGIUM 02-201-24-18 www.samsung.com/be/support (Dutch)www.samsung.com/be_fr/support (French) BOSNIA 055 233 999 www...

Page 41 - Air Conditioner; user manual; imagine; Wall Mounted Type Series; EN ES

Air Conditioner user manual imagine the possibilities Thank you for purchasing this Samsung product. Wall Mounted Type Series AM  FNTD  AM  FNQD  DB68-03633A-10 EN ES FR IT PT DE EL NL PL HU RU