Samsung AG032TN1DKH/EU - Manuals

5 English Safety Infor mation If using the product after being left idle for an extended period of time, make sure to open the air vent valve to release air. • Running water noises may occur inside, or cooling/heating performance may degrade. • Use a bucket or hose to catch water. If using Cool mode...

6 Safety Information English Safety Infor mation FOR POWER SUPPLY WARNING When the circuit breaker is damaged, contact your nearest service centre. Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line over a metal object, place a heavy object...

7 English Safety Infor mation FOR USING WARNING If the appliance is flooded, please contact your nearest service centre. • Failing to do so may result in electric shock or fire. If the appliance generates a strange noise, a burning smell or smoke, cut- off the power supply immediately and contact th...

8 Safety Information English Safety Infor mation After unpacking the fan coil unit, keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. • If a child places a bag over its head, it may result in suffocation. Do not touch the front panel...

9 English Safety Infor mation CAUTION Do not place objects or devices under the fan coil unit. • Water dripping from the fan coil unit may result in fire or property damage. Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy effi...

10 Safety Information English Safety Infor mation This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance ...

11 English At a Glance The product appearance and labels may differ from the illustrations, depending on the model and panel type. Fan Coil Unit Overview At a Glance 02 01 04 05 03 01 Display Indication Function Operation indicator • Heating and cooling model: Operation (Blue) / Defrost (Yellow) • C...

12 English At a Glance If using the product in a location with temperature and humidity outside the standard operating range, the protective system activates and the product may not operate. Use the product under conditions with temperature and humidity within the standard operating range. Operation...

13 English Cl eaning and Maint enanc e Cleaning and Maintaining Cleaning and Maintenance CAUTION • Before cleaning, be sure to turn off the fan coil unit and the auxiliary power switch (MCCB, ELB). Cleaning the fan coil unit Wipe the surface of the indoor unit with a tepid damp cloth.Remove the dust...

14 Cleaning and Maintaining English Cl eaning and Maint enanc e Cleaning the air filter CAUTION • Before cleaning, be sure to turn off the fan coil unit and the auxiliary power switch (MCCB, ELB). • Be sure to hold the grille with a hand to prevent dropping from the opening of the front grille. 1 De...

16 Cleaning and Maintaining English Cl eaning and Maint enanc e 3 Reassembling the air filter CAUTION • If the fan coil unit is used without the air filter, it may be damaged due to dust. 4 Resetting the air filter After cleaning and reassembling the air filter, be sure to reset the filter-cleaning ...

17 English Cl eaning and Maint enanc e Periodical maintenance Maintenance item Interval Requires qualified technicians Clean the air filter. At least once a month Clean the condensate drain pan. Once a year Required Clean up the heat exchange. Once a year Required Clean the condensate drain pipe. On...

18 Cleaning and Maintaining English Cl eaning and Maint enanc e Troubleshooting Refer to the following chart if the fan coil unit operates abnormally. This may save time and unnecessary expense. Problem Solution The air conditioner does not operate immediately after it has been restarted. • Because ...

19 English Cl eaning and Maint enanc e Problem Solution The air is not cool or warm enough. • Check the cool/hot water supply line to ensure that the water pipe system valve is open. If this valve is locked, cold and hot water does not circulate properly, and cooling and heating do not work. Open th...

20 Cleaning and Maintaining English Cl eaning and Maint enanc e Problem Solution Unpleasant odours permeate the room. • If the product is used in a smelly or smoky place, ventilate the place. – You may experience unpleasant smells if the indoor temperature and humidity are high. Operate the product ...

21 English Cl eaning and Maint enanc e Technical specifications Model Net weight Net dimension (W x D x H) AG026TN1DKH 10.1 kg 970mm x 410mm x 135mm AG032TN1DKH 10.1 kg 970mm x 410mm x 135mm AG042TN1DKH 14.0 kg 1200mm x 450mm x 138mm DB68-09315A-03_IB_FCU 무풍1way_EU_EN_.indd 21 DB68-09315A-03_IB_FCU ...

QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/support IRELAND(EIRE) 0818 717100 www.samsung.com/ie/support GERMANY 06196 77 555 77 www.samsung.com/de/support FRANCE 01 48 63 00 00 www.samsung.com/fr/support SPAIN 91 175 00 15 www.samsung.com/es/support...

5 English Sa fe ty In fo rm at io n CAUTION • Before starting the Installation, be sure to carefully read this installation manual. • Make sure that the product is transported to the installation site with being packed. After reaching the installation site, if you need to remove the package and tran...

7 English Installation Pr oc edur e Installation Procedure Step 1 Checking and preparing accessories The following accessories are supplied with the product. Pattern sheet A (1) Pattern sheet B (1) Insulation pipe (2) Flexible hose (1) Insulation drain (1) Rubber Manual (2) Cable-tie (3) Air vent ho...

8 Installation Procedure English Installation Pr oc edur e Dimension of the fan coil unit Slim 1 way cassette (Medium) (Unit: mm) 1150 (Ceiling opening dimension) 970 Drain hole 1198 410 Ceiling A 80 B 500 80 35 22 Water outlet side Water inlet side 50 77 46 1036 (Space of suspension bolts) 249 (Spa...

9 English Installation Pr oc edur e Slim 1 way cassette (Large) (Unit: mm) 1380 (Ceiling opening diameter) 1200 Drain hole 1410 A 85 Ceiling B 500 30 85 50 40 35 100 Water outlet side 450 Water inlet side 1260 (Space between the fixing bolts) 350 (Spac e betw een the fixing bolts) 470 (C eil ing ope...

10 Installation Procedure English Installation Pr oc edur e Step 3 Optional: Insulating the body of the fan coil unit Insulation guide • For the pipe inlet and outlet and some bent parts, cut out and shape the insulation material in accordance with their shape. • Be sure to insulate the air inlet an...

12 Installation Procedure English Installation Pr oc edur e When the installation template is made of paper (Unit: mm) Slim 1 way cassette (Small, Wind-free panel) Slim 1 way cassette (Medium/Large, Wind-free panel) Indoor unit Indoor unit Air outlet Air outlet Air inlet Air inlet 6.0 10 Jig Jig Cei...

13 English Installation Pr oc edur e Step 6 Connecting the water pipes 1 Purge inert gas.• The fan coil unit comes with nitrogen gas (inert gas) charged at the factory for protection of the unit during transportation. Remove the protective caps from the piping to purge inert gas. CAUTION • To preven...

14 Installation Procedure English Installation Pr oc edur e – Uncooled corridors and passages – Old buildings with insufficient insulation – Common urban buildings (apartments, houses, classrooms, private educational institutes, offices, general shops, etc.) – Open structures without ceiling tex – S...

15 English Installation Pr oc edur e CAUTION • Make sure that the pipe insulation is free of gaps and cracks, and apply adhesives specific to the insulation joints so that moisture cannot enter through them. • If the pipe insulation is exposed to the sun's ultraviolet rays, wind tape around the insu...

16 Installation Procedure English Installation Pr oc edur e CAUTION • Be sure to install a 2-way electric valve on the water pipe inlet of the fan coil unit. Failure to do so may cause condensation and product malfunction. • Attach a 40 mesh strainer to the inlet piping (Installation site area) • If...

17 English Installation Pr oc edur e CAUTION • If the rated flow rate is not supplied, it may cause performance degradation and product malfunction. Category Mode Rated flow (LPM) Pressure drop (kPa) Slim 1 way cassette AG026TN1DKH* 7.5 23.0 AG032TN1DKH* 9.6 34.5 AG042TN1DKH* 11.9 45.0 ߢ࢏ߢ ߤߢ࢏ߢ ߦߢ࢏ߢ...

18 Installation Procedure English Installation Pr oc edur e 4 Fully insulate the drain pipe inside the building (on site). If the drain pipe is sloped insufficiently, install the drain pipe vertically from the hose connection port (on site). CAUTION • When connecting the flexible hose to the main dr...

19 English Installation Pr oc edur e Air vent of the fan coil unit 300 mm or less 1000 to 1500 mm 20 mm or more Full thread bolt hanger 550 mm or less Horizontal drain pipe (transverse pipe) More than 1/100 slope Flexible hose Ceiling Horizontal connection Fan coil unit Fan coil unit Fan coil unit 2...

20 Installation Procedure English Installation Pr oc edur e Performing the drainage test 1 Do a leak test at the connection part of the flexible hose and the drain pipe (PVC): a Connect a general hose to the connection part of the flexible hose of the fan coil unit, and pour in some water. b After p...

21 English Installation Pr oc edur e CAUTION • After connecting the drain pipe to the fan coil unit, be sure to perform a leak test. Failure to do so may cause water to leak into the room, leading to property damage. • Before servicing, first remove the condensation water from the fan coil unit drai...

23 English Installation Pr oc edur e N N 1-NO 1-NC N 2-NO 2-NC Wiring diagram when connecting a 3-way valve 3-way valve1 (installed on site) 3-way valve2 (installed on site) • In the 05 series installation options, the SEG15 and SEG22 values define the valve signals, classified as shown in the table...

24 Installation Procedure English Installation Pr oc edur e • Decide the capacity of ELB and MCCB using the following formula. ǹࣈࣉ॔ߣ࢏ߤߧǹߣ࢏ߣǹॣ̈ NOTE • X: The capacity of ELB, MCCB• ॥̈ࡠƊЇ͔ͱ˙ϩ˵ʪθɇϩʪʒʀЇθθʪ͝ϩϑͱ˙ϩ˵ʪ˙ɇ͝ʀͱ̷̈Ї̈͝ϩϑ Rated currents Mode Rated current (A) AG026TN1DKH* 0.14 AG032TN1DKH* 0.19 AG04...

25 English Installation Pr oc edur e Step 11 Optional: Extending the power cable 1 Prepare the following tools. Tools Spec Shape Crimping pliers MH-14 Connection sleeve (mm) 20xØ6.5 (HxOD) Insulation tape Width 19 mm Contraction tube (mm) 70xØ8.0 (LxOD) 2 As shown in the figure, peel off the shields...

26 Installation Procedure English Installation Pr oc edur e 5 Wrap it with the insulation tape twice or more and position your contraction tube in the middle of the insulation tape. Method 1 Method 2 40 mm Insulation tape Insulation tape 35 mm 6 Apply heat to the contraction tube to contract it. Met...

27 English Installation Pr oc edur e 2 Set the option values. CAUTION • The total number of available options are 24: SEG1 to SEG24. • Because SEG1, SEG7, SEG13, and SEG19 are the page options used by the previous remote control models, the modes to set values for these options are skipped automatic...

31 English Installation Pr oc edur e Setting the fan coil unit installation option (suitable for the condition of each installation location) 1 Make sure that the power is supplied to the fan coil unit.• If the fan coil unit is not plugged in, it must include a power supply. 1(L) F2 2(N) F1 Fan coil...

32 Installation Procedure English Installation Pr oc edur e Installation options for the 02 series (detailed) Option No.: 02XXXX-1XXXXX-2XXXXX-3XXXXX Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Function Page Mode - Use of external temperature sensor / Minimizing fan operation when thermostat is off Use of ...

34 Installation Procedure English Installation Pr oc edur e Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 Function Page Individual control with remote control Heating setting compensation - - - Indications and details Indication Detail Indication Detail Indication Details 3 0 or 1 Channel 1 0 Default (...

35 English Installation Pr oc edur e Installation options for the 05 series (detailed) Option No.: 05XXXX-1XXXXX-2XXXXX-3XXXXX Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 Function Page Mode - - - Indications and details Indication Detail Indication Detail 0 5 Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 Functio...

36 Installation Procedure English Installation Pr oc edur e Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 Function Page Choose whether to use Interface module Displaying the water temperaturerise prevention messages Timing separation of the cooling and heating signals for the water pipe valve Forced ai...

37 English Installation Pr oc edur e (*2) An FCU relay (MIM-F10N) must be installed in order to connect with the host controller and the wired remote control. Set this option to '1' if an FCU is installed alone without connecting to a host controller. Set this option to '1' if multiple FCUs (up to 1...

38 Installation Procedure English Installation Pr oc edur e Changing the addresses and options individually When you want to change the value of a specific option, refer to the following table and follow the steps in " Common steps for setting the addresses and options ." Option SEG1 SEG2 SE...

39 English Installation Pr oc edur e Step 13 Performing the test operation 1 Before turning on the product, measure resistances between the power terminals (single phase: L, N) and the earthing of the fan coil unit using a DC 500V insulation resistance meter.• Ɵ˵ʪ͔ʪɇϑЇθʪʒЭɇ̷Їʪϑ͔Їϑϩɵʪɇϩ̷ʪɇϑϩߤߡđץࢋ CAU...

40 English A ppendix Appendix Troubleshooting The following error indications appear on the fan coil unit display when a problem occurs. Error detection and restart • If an error occurs during operation, the display blinks to indicate an error and all operations except for the display operation stop...