Samsung AG026MN1DEH/EU - Manuals

Safety Infor mation 5 English If using the product after being left idle for an extended period of time, make sure to open the air vent valve to release air. • Running water noises may occur inside, or cooling/heating performance may degrade. • Use a bucket or hose to catch water. If using Cool mode...

Safety Information Safety Infor mation 6 English FOR POWER SUPPLY WARNING When the circuit breaker is damaged, contact your nearest service centre. Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line over a metal object, place a heavy object...

Safety Infor mation 7 English FOR USING WARNING If the appliance is flooded, please contact your nearest service centre. • Failing to do so may result in electric shock or fire. If the appliance generates a strange noise, a burning smell or smoke, cut off the power supply immediately and contact the...

Safety Information Safety Infor mation 8 English After unpacking the fan coil unit, keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. • If a child places a bag over its head, it may result in suffocation. Do not touch the front panel...

Safety Information Safety Infor mation 10 English This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance ...

At a Glance 11 English Fan Coil Unit Overview At a Glance 1WAY (PC1NUSMAN / PC1BWSMAN) 02 03 04 01 01 Display Indication Function Remote control sensor Operation indicator Timer indicator Model not equipped with S-Plasma ion: Fan indicatorModel equipped with S-Plasma ion: Purity indicator Filter res...

At a Glance 14 English Operation Features Operating temperature and humidity Mode Indoor temperature Indoor humidity Cool 18°C to 32°C 80% or less Heat 30°C or less - NOTE • Condensation may form on the product, if using Cool mode under high humidity conditions for an extended period of time. • If o...

Cl eaning and Maint enanc e 16 English Cleaning and Maintaining Cl eaning and Maint enanc e Cleaning the air filter CAUTION • Before cleaning, be sure to turn off the fan coil unit and the auxiliary power switch (MCCB, ELB).• Be sure to hold the grille with a hand to prevent dropping from the openin...

Cl eaning and Maint enanc e 17 English Cl eaning and Maint enanc e PC1BWSMAN Insert your hand into the front grille and pullout the front grille to open it. Press the Push signs on the air filter. Grab the handle of the air filter with your hand. Pull out the air filter from the fan coil unit. DB68-...

Cl eaning and Maint enanc e 19 English Cl eaning and Maint enanc e 3 Reassembling the air filter CAUTION • If the fan coil unit is used without the air filter, it may be damaged due to dust. 4 Resetting the air filter After cleaning and reassembling the air filter, be sure to reset the filter-cleani...

Cl eaning and Maint enanc e 26 English Cleaning and Maintaining Cl eaning and Maint enanc e Periodical maintenance Maintenance item Interval Requires qualified technicians Clean the air filter. At least once a month Clean the condensate drain pan. Once a year Required Clean up the heat exchange. Onc...

Cl eaning and Maint enanc e 27 English Cl eaning and Maint enanc e Troubleshooting Refer to the following chart if the fan coil unit operates abnormally. This may save time and unnecessary expense. Problem Solution The fan coil unit does not operate at all. • Check whether the power is turned on, an...

Cl eaning and Maint enanc e 30 English Cleaning and Maintaining Cl eaning and Maint enanc e Technical specifications Model New weight Net dimension(W x D x H) AG026MN1DEH/EU 10.5kg 970*135*410 AG032MN1DEH/EU 10.5kg 970*135*410 AG042MN1DEH/EU 14.0kg 1,200*138*450 AG060MN4DKH/EU 15.5kg 840*204*840 AG0...

Cl eaning and Maint enanc e 31 English Cl eaning and Maint enanc e MEMO DB68-07323A-04_IB_FCU 1,4way_EU_EN.indd 31 DB68-07323A-04_IB_FCU 1,4way_EU_EN.indd 31 2024-01-10 오후 1:44:23 2024-01-10 오후 1:44:23

QUESTIONS OR COMMENTS? Samsung, PO Box 12987, Blackrock, Co. Dublin. IEor Euro QA Lab. Saxony Way, Yateley, Hampshire GU46 6GG, UK COUNTRY CALL OR VISIT US ONLINE AT UK 0333 000 0333 www.samsung.com/uk/support IRELAND (EIRE) 0818 717100 www.samsung.com/ie/support GERMANY 06196 77 555 77 www.samsung....

5 English Safety Information CAUTION ࡙ Before starting the Installation, be sure to carefully read this installation manual ࡙ Make sure that the product is transported to the installation site with being packed. After reaching the installation site, if you need to remove the package and transport th...

7 Installation Pr oc edur e English Installation Procedure Step 1 Checking and preparing accessories The following accessories are supplied with the product. Ɗ̷͔̈ߢиɇцʀɇϑϑʪϩϩʪ ťɇϩϩʪθ͝ϑ˵ʪʪϩ࣍ߢ࣎ťɇϩϩʪθ͝ϑ˵ʪʪϩ9࣍ߢ࣎ Ã͝ϑЇ̷ɇϩ̈ͱ͝Χ̈Χʪ࣍ߣ࣎ ˜̷ʪӱɵ̷ʪ˵ͱϑʪ࣍ߢ࣎ Ã͝ϑЇ̷ɇϩ̈ͱ͝ʒθɇ̈࣍͝ߢ࣎ ŵЇɵɵʪθ đɇ͝Їɇ̷࣍ߣ࣎ Aɇɵ̷ʪࣗϩ̈ʪ࣍ߤ࣎ Ã͝ϑϩɇ̷̷ɇϩ̈...

8 Installation Pr oc edur e English Installation Procedure Step 2 Choosing the installation location Installation location requirements ࡙ Air must be distributed optimally. ࡙ The passage of air must not be disturbed. ࡙ Condensation water must be drained easily. ࡙ The support structure must be strong...

9 Installation Pr oc edur e English Dimension of the fan coil unit Slim 1 way cassette (Small) (Unit: mm) ࣍ƊΧɇʀʪɵʪϩиʪʪ͝ϩ˵ʪѣӱ͝˝ɵͱ̷ϩϑ࣎ 1036 970 410 85 249 ࣍A ʪ̷̈ ̈͝˝ͱΧʪ̈͝͝˝ʒ̈ɇ͔ʪϩ ʪθ࣎ A B 150 25 21 52 50 77 440 500 ࣍Aʪ̷̈̈͝˝ͱΧʪ̈͝͝˝ʒ̈ɇ͔ʪϩʪθ࣎ 1150 1198 Aʪ̷̈̈͝˝ Uθɇ̈͝˵ͱ̷ʪ ࣍ƊΧɇʀ ʪɵʪϩи ʪʪ͝ ϩ˵ʪ ѣӱ͝˝ɵͱ̷ϩϑ࣎ Ǯɇ...

13 Installation Pr oc edur e English NOTE ࡙ The shape of the fan coil unit may differ depending on the model. ࡙ When installing a cassette type product on a ceiling with a temperature of 27 °C or more and a humidity of 80% or more, install polyethylene foam or a similar insulation material with a th...

14 Installation Pr oc edur e English Installation Procedure Installing on a new ceiling 1 Place the pattern sheet on the ceiling at the spot where you want to install the fan coil unit. NOTE ࡙ Because the pattern sheet is made of paper, it may shrink or stretch slightly due to temperature or humidit...

16 Installation Pr oc edur e English Installation Procedure Step 5 Purging inert gas from the fan coil unit The fan coil unit comes with nitrogen gas (inert gas) charged at the factory. Therefore, all inert gas must be purged before connecting the water piping. Open the sealed tube at the end of the...

17 Installation Pr oc edur e English Step 7 Performing the water leak test and insulating the piping 1 Perform the water leak test. ࡙ Make sure that there is no water leakage from the water pipes connected to the fan coil unit. 2 Insulate the pipes. ࡙ After confirming that there is no leakage from t...

18 Installation Pr oc edur e English Installation Procedure 2-2 Insulate the piping. ࡙ Incorrect piping insulation may cause condensation on the piping surfaces or degrade the product performance. ࡙ Make sure that the bent parts of the piping are correctly covered with insulation. ˜̈уѣθ̷͔цϑͱϩ˵ɇϩϩ˵ʪθ...

20 Installation Pr oc edur e English Installation Procedure 5 Manage water quality in accordance with the following water quality standards for refrigeration equipment: CAUTION ࡙ If water quality is not managed in accordance with the water quality standards, corrosion and scales may develop, which m...

21 Installation Pr oc edur e English 2 Tighten the metal clamp as shown in the figure. When tightening the clamp, tighten as tight as possible so that the eight holes are visible. 3 Wrap the metal clamp and the drain hose with a sealing pad for insulation, and then fix them with a clamp. 4 Fully ins...

22 Installation Pr oc edur e English Installation Procedure ࡙Ã˙ϩ˵ʪϑ̷ͱΧʪͱ˙ϩ˵ʪʒθɇ̈͝Χ̈Χʪ̈ϑ̈͝ϑЇ˙˙̈ʀ̈ʪ͝ϩ̷࣍ʪϑϑϩ˵ɇ͝ߢࢥߢߡߡ࣎ࡡɵʪϑЇθʪϩͱ install an air vent at the top of each fan coil unit to prevent water from flowing back to the unit. 200 mm or less 100 mm or more 1 to 1.5 m 100 mm or less (200 mm or less) ࡙ ...

23 Installation Pr oc edur e English Concentrated drainage 1 to 1.5 m Connect to the main drain pipe. Centralized horizontal drain pipe ͔࣍ͱθʪϩ˵ɇ͝ߢࢥߢߡߡϑ̷ͱΧʪ࣎ Main air vent (must be installed) Full thread bolt hanger Air vent of the fan coil unit 1 If 3 or more fan coil units are installed, install th...

24 Installation Pr oc edur e English Installation Procedure NOTE ࡙ When the float switch is not detected due to insufficient water on the drain pan, the drain pump will not work. ࡙ If the power supply is directly connected to the L and N terminals, a communication error message may appear. ࡙ After c...

25 Installation Pr oc edur e English 3 Shorten the connection length of the drain pipe as much as possible . ࡙ Install the drain pipe so that it is sloped downward (3 or more) for proper drainage of condensation water. ࡙ Use a cable tie to secure the connection part so that the flexible hose and tje...

26 Installation Pr oc edur e English Installation Procedure Ęͱ͔̈͝ɇ̷ʀθͱϑϑࣗ ϑʪʀϩ̈ͱ͝ɇ̷ϑ̈іʪ Ęͱ͔̈͝ɇ̷ ʒ̈ɇ͔ʪϩʪθͱ˙ ϩ˵θʪɇʒ B D ʒߢ E F ø ʒߣ ϩ 9ɇϑ̈ʀ ϑ̈іʪ Ɵͱ̷ʪθɇ͝ʀʪ 9ɇϑ̈ʀ ϑ̈іʪ Ɵͱ̷ʪθɇ͝ʀʪ 9ɇϑ̈ʀ ϑ̈іʪ Ɵͱ̷ʪθɇ͝ʀʪ Min. Min. đɇуࢋ 9ɇϑ̈ʀ ϑ̈іʪ Ɵͱ̷ʪθɇ͝ʀʪ Min. 1.5 4 6.6 ±0.2 3.4 +0.3 -0.2 1.7 ±0.2 4.1 6 16 4.3 +0.2 0 0.7 4 ...

27 Installation Pr oc edur e English 3 Specifications of the terminal blocks (Unit: mm) AΧͱиʪθࡠđߥ ϑʀθʪи Aͱ͔͔Ї̈͝ʀɇϩ̈ͱ͝ࡠ đߤϑʀθʪи Aͱ͔͔Ї̈͝ʀɇϩ̈ͱ͝ࡠđߤࢋߦ ϑʀθʪиkø9 11 13 18 6.62 7.62 10 7.5 9.0 13 .8 CAUTION ࡙ When installing the product, be sure to install a 2-way electric valve on the water inlet pipe. Whe...

28 Installation Pr oc edur e English Installation Procedure Ã͝ϑϩɇ̷̷ɇϩ̈ͱ͝ʪуɇ͔Χ̷ʪ Total power cable length L = 100 [m], initial pull-in current i = 10 [A], running current of each unit = 1 [A], total 10 fan coil units are installed ॥࣍ Coef×35.6×L k ×i k ) <10% of input voltage [V] 1000×A k n k=1 Ap...

29 Installation Pr oc edur e English Step 12 Optional: Extending the power cable 1 Prepare the following tools. Ɵͱͱ̷ϑ ƊΧʪʀ Ɗ˵ɇΧʪ Crimping pliers MH-14 Connection sleeve (mm) 20xØ6.5 (HxOD) Insulation tape Width 19 mm Contraction tube (mm) 70xØ8.0 (LxOD) 2 As shown in the figure, peel off the shields...

30 Installation Pr oc edur e English Installation Procedure 7 After tube contraction work is completed, wrap it with the insulation tape to finish. Insulation tape CAUTION ࡙ Make sure that the connection parts are not exposed to outside. ࡙ Be sure to use insulation tape and a contraction tube made o...

31 Installation Pr oc edur e English 2 Set the option values. CAUTION ࡙ The total number of available options are 24: SEG1 to SEG24. ࡙ Because SEG1, SEG7, SEG13, and SEG19 are the page options used by the previous remote control models, the modes to set values for these options are skipped automatic...

40 Installation Pr oc edur e English Installation Procedure CAUTION ࡙ If you enter A to F to the SEG5 or SEG6, the fan coil unit main address is not changed. ࡙ If you enter 0 to the SEG 3, the fan coil unit maintains the previous main address although you enter the option value for the SEG5 or SEG 6...

44 Installation Pr oc edur e English Installation Procedure (*1) Minimizing fan operation when thermostat is off: – The fan operates for 20 seconds at an interval of 5 minutes in the ²ʪɇϩ mode. – When thermostat is off in the Aͱͱ̷ mode, the fan stops or Ultra breeze function starts based on the sett...

46 Installation Pr oc edur e English Installation Procedure ĮΧϩ̈ͱ͝ SEG19 Ɗkߣߡ Ɗkߣߢ Ɗkߣߣ Ɗkߣߤ Ɗkߣߥ Function Indication Detail Choose whether to use Interface module Displaying the water- temperature- rise-prevention messages Timing separation of the cooling and heating signals for the water pipe...

48 Installation Pr oc edur e English Installation Procedure Changing the addresses and options individually When you want to change the value of a specific option, refer to the following table and follow the steps in “Common steps for setting the addresses and options.” ĮΧϩ̈ͱ͝ SEG1 Ɗkߣ Ɗkߤ SEG4 SE...

49 Installation Pr oc edur e English Step 14 Performing the test operation 1 Before turning on the product, measure resistances between the power terminals (single phase: L, N) and the earthing of the fan coil unit using a DC 500V insulation resistance meter. ࡙ Ɵ˵ʪ͔ʪɇϑЇθʪʒЭɇ̷Їʪϑ͔Їϑϩɵʪɇϩ̷ʪɇϑϩߤߡđץࢋ CA...

50 English A ppendix Appendix Troubleshooting The following error indications appear on the fan coil unit display when a problem occurs. Error detection and restart ࡙ If an error occurs during operation, the display blinks to indicate an error and all operations except for the display operation stop...

51 English A ppendix ߥиɇцʀɇϑϑʪϩϩʪ Aͱ͝ʒ̈ϩ̈ͱ͝ͱ˙ϩ˵ʪ˙ɇ͝ʀͱ̷̈Ї̈͝ϩ kθθͱθʀͱʒʪ ˜ɇ͝ʀͱ̷̈Ї̈͝ϩʒ̈ϑΧ̷ɇц̈͝ʒ̈ʀɇϩ̈ͱ͝ϑ ƊϩɇθϩࢥƊϩͱΧ Uʪ˙θͱϑϩ Ɵ͔̈ʪθ ˜̷̈ϩʪθ ʀ̷ʪɇ̈͝͝˝ Short- or open-circuit error of the room temperature sensor E121 1. Short- or open-circuit error of the EVA IN sensor E122 2. Short- or open-circuit error of t...

52 English A ppendix Appendix ߤߧߡʀɇϑϑʪϩϩʪ Aͱ͝ʒ̈ϩ̈ͱ͝ͱ˙ϩ˵ʪ˙ɇ͝ʀͱ̷̈Ї̈͝ϩ kθθͱθʀͱʒʪ ˜ɇ͝ʀͱ̷̈Ї̈͝ϩʒ̈ϑΧ̷ɇц̈͝ʒ̈ʀɇϩ̈ͱ͝ϑ Ãʀʪɵ̷Їʪ ǽʪ̷̷ͱи ˝θʪʪ͝ 9̷Їʪ ŵʪʒ Power reset (blinking once every 2 seconds) No error Short- or open-circuit error of the room temperature sensor E121 Short- or open-circuit error of the EVA IN s...