Samsung AEN160YDGHA - Manuals

Safety precautions _05 ENGLISH FOR POWER SUPPLY WARNING Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis. • Unplug the power plug and clean it with a dry cloth.• Failing to do so may result in electric shock or ...

06_Safety precautions Safety precautions FOR USING WARNING Do not place an object near the outdoor unit that allows children to climb onto the machine. • This may result in children seriously injuring themselves. Do not use this air conditioner for long periods of time in badly ventilated locations ...

Overview _07 ENGLISH Overview CONTROL PANEL Display panel Up  /Down  button DHW hot key Outing hot key Power(Space mode)Power(DHW mode)Mode button (Space mode)Mode button (DHW mode)Set buttonView buttonDaily schedule setting buttonWeekly schedule setting button Cancel/Delete button Silent buttonSc...

08_ Checking the function Checking the function of buttons and indicators SPACE OPERATION MODE Mode Button Display Function Operationmode Space heating & cooling Operation It can supply heating and cooling to the space when the Power (Space mode) button is on. Results: The heat pump will run in ...

Checking the function _09 ENGLISH DHW OPERATION MODE Mode Button Display Function Operationmode Water heating Operation It can supply warm water to the DHW tank when the Power (DHW mode) button is pressed. Results: Heat pump will be turned on with the domestic water heating mode. DHW mode Economic E...

10_ Checking the function Checking the function of buttons and indicators TEMPERATURE ADJUSTMENT Mode Button Display Function Operationmode Temperature Adjust To push up and down, modulate the water (Air) temperature. Supply water temperature to the load Domestic water temperature Room temperature O...

Checking the function _11 ENGLISH HOT KEY Mode Button Display Function Hot key Up To adjust set point temperature, press arrows up or down. Results: The temperature can be set ranges from 5°C to 55°C and be adjusted by 0.5°C increments. Down DHW When the DHW hot key is enabled, both booster heater i...

12_ Checking the function Checking the function of buttons and indicators SCHEDULE Mode Button Display Function Schedule The system operates according to a certain schedule which is pre-defined by users or installers. These schedule setting button is used to program the controller.

Checking the function _13 ENGLISH STATUS INDICATOR Mode Status Display Function Status Compressor On This icon indicates that the compressor in the outdoor unit is running. Back-up heater On This icons indicate that the backup heater of the unit is operating, when there is a high demand for heating ...

14_ Checking the function Checking the function of buttons and indicators OPTIONAL FUNCTION INDICATOR Mode Button Display Function Optional function Child Lock The remote controller buttons can be locked to prevent children from changing the settings or from pressing the buttons by accident. Thermos...

Operating basic function _15 ENGLISH Operating basic function AVAILABLE MODE Samsung air to water heat pump system’s operation modes are listed as below.Heating mode and cooling mode are not available at the same time. Heating Water law Cooling + DHW DHW Outing (heating) Cooling Heating + DHW Water ...

16_ Operating basic function Operating basic function SPACE HEATING OPERATION In this mode, heating function will be activated as required by target water temperature. Target water temperature is determined in 2 ways as described below. • Change set value manually.• Use mode of “Water Law” (Auto mod...

Operating basic function _17 ENGLISH SPACE COOLING OPERATION In this mode, heating function will be activated as required by target water temperature. Target water temperature is determined in 2 ways as described below. • Change set value manually. 1. Press Power (Space mode) button to turn on the h...

18_ Operating basic function Operating basic function WATER LAW In this mode, heating function will be activated as required by target water temperature. Target water temperature is determined in 2 ways as described below. • Change set value manually.• Use mode of “Water Law” (Auto mode). 1. Press P...

Operating basic function _19 ENGLISH DOMESTIC WATER HEATING OPERATION In this mode, domestic water heating will be activated as required by the water temperature set point. • The set point can be set manually. 1. Press Power (DHW mode) button to turn on DHW tank. The priority between heating/cooling...

20_ Operating basic function Operating basic function TARGET ROOM AIR TEMPERATURE OPERATION In this mode, heating and cooling function will be activated as required by target indoor air temperature. If the indoor’s temperature couldn’t be satisfied, change the water law shift value. If the thermosta...

Operating hot key function _21 ENGLISH Operating hot key function URGENT DHW MODE If you want to enjoy a leisurely bath or need a lot of warm water urgently, select the DHW hot key. When this mode is enabled, it is assured that the full capacity of the heat pump is only delivered for domestic water ...

22_ Operating hot key function Operating hot key function OUTING MODE If you want to take a vacation, you can use the Outing hot key. When this mode is enabled, it is assured that the heat pump maintains your house at a lower temperature to save energy cost. 1. Press Outing Hot key. The heat pump de...

Operating advanced function _23 ENGLISH Operating advanced function SETTING THE TIME Your monobloc unit contains a clock used to start and stop the unit automatically at a given time. You must set the time when you purchase the monobloc unit or reset this system. 1. Push the Set button for 3 seconds...

24_ Operating advanced function Operating advanced function SETTING THE 7-DAY(WEEKLY) SCHEDULE Set the schedules for ON/OFF timer to be repeated each week. Maximum 7 schedules may be set for each day. • When using room thermostat, it is impossible to reserve.• If weekly schedule reserved 7 items is ...

26_ Operating advanced function Operating advanced function SETTING THE 7-DAY(WEEKLY) SCHEDULE Deleting the 7-day (Weekly) schedule 1. Select the schedule from Reservation View Mode. 2. Push the Cancel/Delete button for 3 seconds. 3. The LCD pictures changes to the reservation mode after delete the ...

Operating advanced function _27 ENGLISH SETTING THE DAILY SCHEDULE Set the daily schedule to reserve On / Off timer of DHW (Eco/Std/Power) and Silent mode. At most 15 schedules may be set for day. • If the field setting is for no use DHW and use other manufacturer tank, it is impossible to reserve “...

28_ Operating advanced function On Reservation Off Reservation Operating advanced function SETTING THE DAILY SCHEDULE 4. Set the hour by pressing the Up  or Down  button. The ‘hour’ indicator will blink. Set the hour and press Set button to save the setting. 5. Set the minute by pressing the Up  ...

Operating advanced function _29 ENGLISH Deleting the daily schedule 1. Select the schedule from Reservation View Mode. 2. Push the Cancel/Delete button for 3 seconds. 3. The LCD pictures change to the reservation mode after deleting the schedule. Operating the daily schedule 1. Operate automatically...

30_ Operating advanced function Operating advanced function FIELD SETTING MODE Setting the Field Setting Value of wired remote controller Field setting mode is to adjust specific functions in accordance with customer’s demands.Field setting mode is easy-to-access and programmable by the wired remote...

32_ Operating advanced function Operating advanced function FIELD SETTING MODE • Code 30  : User’s options for domestic hot water(DHW) tank heating 3011 : Application of DHW tank in user’s system 302  : Heat pump variables for tank temp. control and combination with booster heater 303  : Booster...

34_ Operating advanced function Operating advanced function FIELD SETTING MODE Remote Controller Setting Range : Code 10  Space Cooling • Target water outlet temperature : Upper limit(#1011, Default 25ºC, Range : 18 ~ 25ºC), Lower limit(#1012, Default 16ºC, Range : 5 ~ 18ºC) - With this default FS...

Operating advanced function _35 ENGLISH Water Law & Room Thermostat : Code 20  Field Setting Value Main Menu & Code Sub Menu Function Description Sub Code Default Min Max Step Unit Water Law Code 20  Outdoor Temp for Water Law (Heating) Point   11 -10 -20 5 1 ˚C Point   12 15 10 20...

36_ Operating advanced function Operating advanced function FIELD SETTING MODE Water Law for Cooling • Outdoor air temperature range : Lower limit  (#2051, Default 30˚C, Range : 25 ~ 35˚C), Upper limit  (#2052, Default 40˚C, Range : 35 ~ 45˚C) - With this default settings, the water outlet tempera...

Operating advanced function _37 ENGLISH DHW Heating : Code 30  T(C) T U > T HP MAX T HP MAX T HP OFF T HP ON T U #3021 #3022 #3023 T(C) T U < T HP MAX T HP MAX T U =T HP OFF T HP ON #3021 #3023 Tu : User set temp.T(C) : Temp. (Celcius) 1 t 0 1 0 1 0 Space heating request DHW request DHW oper...

38_ Operating advanced function DHW Application The FSV #3011 in the wired remote controller should be set to “1(Yes)” to use DHW function. Heat Pump Variables for Controlling DHW Tank • Maximum DHW tank temperature with R410A(refrigerant) heat pump operation : FSV #3021, Default 50˚C, Range : 45 ~ ...

40_ Operating advanced function Booster Heater Variables for Controlling DHW Tank • The FSV #3031 should be set to “1(On)”(Default) to use booster heater as an additional heat source for DHW tank. • Booster heater startup delay timer : In case of DHW request, this timer will delay the operation of b...

42_ Operating advanced function Operating advanced function FIELD SETTING MODE Space Heating : Code 40  Ta #4012 #3034 Tu Ts DHW by Booster Heater Only Heat Pump Variables for Space Heating • FSV #4011 for DHW priority is set to “0(DHW)”(Default) as a default. Space heating gets a priority by sett...

Operating advanced function _43 ENGLISH Backup Heater Variables for Space Heating • The FSV #4021 should be set to “1(On)” to use 2-stage electric backup heater in hydro unit as an additional heat source. • To compensate the lowered heat pump heating performance under very cold weather conditions, t...

44_ Operating advanced function Operating advanced function FIELD SETTING MODE Others : Code 50  Outing Mode (Hot Key of Wired Remote Controller) • All the target temperatures – space heating and cooling, water law, DHW, Room temperature – are set to the values defined in the above table under the...

Operating advanced function _45 ENGLISH Peak Power Control • If users make contracts with local electric power company for limiting the amount of power consumption when a surge in power usage, users can set FSV of “Forced off”. • According to FSV (#5041), Default is Non-usage. And According to FSV (...

46_ Appendix Appendix TEMPERATURE TABLE Available operation range Mode Target temperature Display Setting range Current display Setting method Control method Set View Default Available Cooling Leaving water O O 16~25˚C • Min : 5~18˚C• Max : 18~25˚C -50~94˚C Up/Down - Heating Leaving water O O 25~55˚...

Appendix _47 ENGLISH MAINTAINING THE UNIT Maintenance activities • In order to ensure optimal availability of the unit, a number of checks and inspections on the unit and the field wiring have to be carried out at regular intervals, preferably yearly. This maintenance should be carried out by SAMSUN...

48_ Appendix Appendix TROUBLESHOOTING TIPS If the unit has some problem to work properly, error codes will be displayed on the wired remote controller. The following table describes the explanation of the error codes. Display Explanation EVA Inlet temp sensor SHORT or OPEN EVA Outlet temp sensor SHO...

Appendix _49 ENGLISH Communication Display Explanation Abnormal communication B/W Wired remote controller & Hydro Unit Communication tracking error B/W Wired remote controller & Hydro Unit FRAM Read/Write Error(Wired remote controller data error) E654 • Wrong data transmit B/W micom & IC...

Appendix _51 ENGLISH ERROR CODES If the unit has some problems and does not work normally, error code is shown on the OUTDOOR UNIT main PBA or LCD of the wired remote controller. Display Explanation Error Source 101 Hydro Unit / OUTDOOR UNIT wire connection error Hydro Unit, OUTDOOR UNIT 162 EEPROM ...

AEEE Yönetmeliğine Uygundur This product is RoHS compliant COUNTRY CALL OR VISIT US ONLINE AT AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com BELGIUM 02-201-24-18 www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) BOSNIA 051 133 1999 www.samsung.com BULGARIA 07001 33 11 , share c...

Air to Water Heat Pump -Split Hydro Unit User manual imagine the possibilities Thank you for purchasing this Samsung product. Split Hydro UnitAEN080YDEHAAEN160YDEHAAEN160YDGHA DB68-03238A- 09 EN ES FR IT PT DE