Samsung AC140BNPDKH/EU - Manuals

6 English Safety Information This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line. • Failure to do so may result in electric shock, fire, an explosion, or other problems with the product. • Make sure that it is in accordance with ...

7 English Safety Information FOR POWER SUPPLY WARNING When the circuit breaker is damaged, contact your nearest service centre.Do not pull or excessively bend the power line. Do not twist or tie the power line. Do not hook the power line over a metal object, place a heavy object on the power line, i...

11 English Safety Information Do not drink the water from the air conditioner. • The water may be harmful to humans. Do not apply a strong impact to the remote control and do not disassemble the remote control. Do not touch the pipes connected with the product. • This may result in burns or injury. ...

12 English Safety Information FOR CLEANING WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner, alcohol or acetone to clean the appliance. • This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing mai...

13 English At a Glanc e Operating temperature and humidity Mode Outdoor temperature Indoor temperature Indoor humidity Cool mode -15°C to 50°C 18°C to 32°C 80% or less Heat mode -20°C to 24°C 30°C or less - Dry mode -15°C to 50°C 18°C to 32°C 80% or less CAUTION • If you use the air conditioner at a...

14 English At a Glanc e The actual product may differ slightly from the image depicted below. Indoor Unit Overview 01 02 03 04 05 06 07 08 09 01 Air flow blade (up and down) 02 Air flow blade (left and right) 03 Air outlet 04 Control panel 05 Indoor unit display 06 Air filter 07 Remote control holde...

15 English At a Glanc e 02 03 04 05 01 01 Power button 02 Mode button (Lock button) 03 Fan speed button (Turbo function Button) 04 Indoor unit display 05 Temperature button Indoor unit display 02 03 04 05 06 07 08 09 01 01 Operation mode indicators 02 Defrost operation indicator 03 Outdoor unit oper...

16 English At a Glanc e You can control the air conditioner with the control panel without using the remote control. Turning on or off the air conditioner Press the (Power) button. The air conditioner turns on with a ring sound and then its operation starts. To turn off the air conditioner, press th...

17 English At a Glanc e (Lock 3sec) Selecting the operation mode/ Locking the control panel • Press the (Mode) button to change the operation mode. Each time you press the button, the mode changes in the following order: Auto → Cool → Dry → Fan → Heat. • Press the (Mode) button for 3 seconds. The (L...

18 English At a Glanc e Remote Control Overview 01 02 03 04 10 11 12 13 14 05 06 07 08 09 15 16 17 18 19 20 01 Set temperature indicator 02 Timed on/off indicator 03 Operation mode indicator 04 Unsupported functions NOTE • The Single user, Heater and Purity functions ( ) are not supported by this mo...

19 English At a Glanc e Replacing batteries When the icon appears in the remote control display, replace the batteries with new ones. Two 1.5V AAA type batteries are required. Two 1.5V AAA type batteries 1 3 2 Correct disposal of batteries in this product This marking on the battery, manual or packa...

20 English At a Glanc e You can use the air conditioner easily by selecting a mode or function and then by controlling the temperature, fan speed, and air flow direction. Remote Control Operation Turning on or off the air conditioner You can turn on or off the air conditioner by pressing the (Power)...

21 English At a Glanc e Controlling fan speed You can select the following fan speeds in each mode: Mode Available fan speeds Auto/Dry (Auto) Cool/Heat (Auto), (Med), (High), (Turbo) Fan (Med), (High), (Turbo) Controlling temperature You can control the temperature in each mode as follows: Mode Temp...

22 English Po w er Smar t F eatur es Auto mode Use the Auto mode when you want the air conditioner to automatically control the Cool mode. The air conditioner will provide the most comfortable atmosphere that it can. ▶ ▶ Select Auto. NOTE • You cannot change the fan speed.• While the Cool mode is ru...

23 English Po w er Smar t F eatur es Dry mode Use the Dry mode in rainy or humid weather. ▶ ▶ Select Dry. NOTE • You cannot change fan speed in the Dry mode.• The greater the difference between the set temperature and the current temperature is, the greater the amount of air that is dehumidified is....

24 English Po w er Smar t F eatur es Heat mode Use the Heat mode to stay warm. ▶ ▶ Select Heat. NOTE • While the air conditioner warms up, the fan may not operate for a while at the beginning to prevent cold wind. • While the defrost function is running, the indoor unit provides no breeze to prevent...

25 English Po w er Smar t F eatur es There is a variety of useful functionality provided by the Samsung air conditioner. Turbo function Use the Turbo function to quickly cool your room. This function provides the most powerful cooling air. ▶ NOTE • To turn off the Turbo function, press (Turbo) butto...

26 English Po w er Smar t F eatur es Clean function Use the Clean function to remove moisture from the inside of the air conditioner for preventing propagation of fungi, bacteria, etc. ▶ ▶ Select Clean . ▶ • When the Clean function is set, the (Clean) indicator appears on the indoor unit display. Wh...

27 English Po w er Smar t F eatur es Energy-Saving Operation (When the air conditioner is off) Timed on/Timed off function Use the Timed on/off function to turn the air conditioner on or off after the time that you set. ▶ ▶ Select On or Off. ▶ (Set the on/off time.) ▶ NOTE • You can set a time betwe...

28 English Cl eaning and Maint enanc e Cleaning the indoor unit exterior and outdoor unit heat exterior Before cleaning, be sure to turn off the air conditioner. Tepid damp cloth Soft brush Spray water to clean the dust. CAUTION • Do not open the panel when the air conditioner is operating. This act...

29 English Cl eaning and Maint enanc e Cleaning the filter Vacuum cleaner CAUTION • Do not scrub the air filter with a brush or other cleaning utensil. This may damage the filter.• Do not expose the air filter to direct sunlight when drying it. NOTE • Clean the air filter every 2 weeks. Cleaning ter...

30 English Cl eaning and Maint enanc e Periodical maintenance Unit Maintenance item Interval Requires qualified technicians Indoor unit Clean the air filter. Once every 2 weeks Clean the condensate drain pan. Once a year Required Clean up the heat exchange. Once a year Required Clean the condensate ...

31 English Cl eaning and Maint enanc e Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expense. Problem Solution The air conditioner does not operate immediately after it has been restarted. • Because of the protective mechanism, the applia...

33 English Cl eaning and Maint enanc e Problem Solution Unpleasant odours permeate the room. • If the air conditioner is running in a smoky area or if there is a smell entering from outside, ventilate the room properly. • If the air conditioner has not been operated for an extended period of time, c...

34 English Cl eaning and Maint enanc e Important information: regulation regarding the refrigerant used This product contains fluorinated greenhouse gases. Do not vent gases into the atmosphere. CAUTION • If the system contains 5 tCO₂e or more of fluorinated greenhouse gases, it must be checked for ...

35 English Cl eaning and Maint enanc e Memo DB68-11843A-01_IB_PAC Mirage_EU_EN.indd 35 DB68-11843A-01_IB_PAC Mirage_EU_EN.indd 35 2024-01-16 오후 12:02:02 2024-01-16 오후 12:02:02

5 English Safety Infor mation Checking auxiliary power switch ON 1 phase circuit breaker 3 phase 4 wire circuit breaker Turn on the auxiliary power switch which is installed separately. NOTE Auxiliary power switch (ELCB, ELB) • Auxiliary power switch is not included in the package. Purchase and inst...

6 English Instal lation Pr oc edure Step 1 Choosing the installation location Determine the installation location considering the following conditions and obtain the user approval. Indoor unit • Install the unit where the pipes and cables can be easily connected to the outdoor unit. • Install the un...

7 English Instal lation Pr oc edure Outdoor unit installation request • The suggested space is based on the outdoor temperature of 35°C while in operation. If the outdoor temperature is higher than 35°C, secure more space. • Be sure to secure sufficient clearance for a person and air flow passage. •...

8 English Installation Procedure Instal lation Pr oc edure WARNING • Should adopt bar type louver. Don’t use a type of rain resistance louver. [Bar type louver] [Rain resistance louver] • Louver specifications. – Angle criteria : less than 20° – Opening ratio criteria : greater than 80% WARNING • Af...

9 English Instal lation Pr oc edure Step 2 Unpacking Unpacking the indoor unit 1 Open the indoor unit package. 2 Remove the top and middle cushions. 3 Remove the bottom cushion. Unpacking the outdoor unit 1 Pull out the outdoor unit from the package. 2 Remove the top cushion. 3 Remove the 4 screws f...

10 English Installation Procedure Instal lation Pr oc edure 2 Wind the refrigerant pipes, power cable, communication cable, and drain hose with vinyl tape to make a pipe bundle. Pipe insulator Vinyl tape Drain hose Indoor/outdoor unit communication cable NOTE • Be sure to insulate the pipes without ...

12 English Installation Procedure Instal lation Pr oc edure Step 7 Optional: Cutting and flaring the pipes 1 Make sure that you have the required tools; pipe cutter, reamer, flaring tool, and pipe holder. 2 If you want to shorten the pipes, cut it with a pipe cutter, making sure that the cut edge re...

13 English Instal lation Pr oc edure AC100BNPDKH (1-phase) F2 F1 1(L) 2(N) N L F1 F2 V1 V2 F3 F4 1(L) 2(N) Indoor Unit Cable clamp Indoor power cable Main power cable Communication cable Cable tie AC140BNPDKH (3-phase) F1 F2 V1 V2 F3 F4 1(L) 2(N) N L3(T) 1(L) 2(N) L2(S) L1(R) F2 F1 Indoor Unit Cable...

14 English Installation Procedure Instal lation Pr oc edure Thickness of the wire (mm²) B (mm) d2 (mm) 2.5 Less than 9.5 More than 4.5 4.5 Less than 9.5 More than 4.5 6.0 Less than 9.5 More than 4.5 10.0 Less than 15 More than 8.4 Connecting the cable to the power terminal Connect the cables to the ...

15 English Instal lation Pr oc edure Indoor and outdoor unit connection diagram Indoor unit Outdoor unit 1(L) 2(N) L F1 F1 F2 V1 V2 F3 F4 1(L) 2(N) N F2 AC140BXPDNH • This product uses a 3-phase 4-wire electrical system, with 380 to 415V supply. • When connecting the outdoor-to-indoor power cables, ...

16 English Installation Procedure Instal lation Pr oc edure NOTE 1 Voltage range • Units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits 2 Maximum allowable voltage variation between phases is 2%. 3 Wire size & type mus...

18 English Installation Procedure Instal lation Pr oc edure Step 10 Setting the indoor unit addresses and the installation options You cannot set both of the indoor unit addresses and the installation options in a batch: set both of them respectively. Common steps for setting the addresses and optio...

23 English Instal lation Pr oc edure Setting the indoor unit addresses Option No. for an indoor unit address: 0AXXXX-1XXXXX-2XXXXX-3XXXXX Before installing an indoor unit, be sure to set an address for the indoor unit by taking the following steps: 1 Make sure that the power is supplied to the indoo...

24 English Installation Procedure Instal lation Pr oc edure Setting the installation options in a batch Option No. for an indoor unit address: 02XXXX-1XXXXX-2XXXXX-3XXXXX 1 Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power supply. ...

25 English Instal lation Pr oc edure Emergency Temperature Output (ETO) function CAUTION • In order to deploy the ETO function, the MIM-B14, an external contact interface module, must be installed in each indoor unit. – The ETO is a concept of emergency operation of indoor units. If the indoor unit ...

26 English Installation Procedure Instal lation Pr oc edure ETO operation specifications 1 Main indoor unit – Based on the external contact control settings, the main indoor unit decides whether to generate output when an error (indoor unit stop) occurs. – Based on the ETO settings, the main indoor ...

27 English Instal lation Pr oc edure Step 11 Checking the earthing If the power distribution circuit does not have a earthing or the earthing does not comply with specifications, an earthing electrode must be installed. The corresponding accessories are not supplied with the air conditioner. 1 Selec...

28 English Installation Procedure Instal lation Pr oc edure Step 13 Evacuating the air 1 Connect the manifold gauge to a vacuum pump. 2 Purge the air from the system using the vacuum pump for about 30 minutes. • Make sure that pressure gauge shows -0.1006 Mpa after about 30 minutes. • Use a vacuum p...

29 English Instal lation Pr oc edure Indoor unit Outdoor unit (Scale) Ref. Vacuum pump Liquid side service valve Gas side service valve Manifold gaugeHigh pressure side Low pressure side Open the manifold gauge valve connected to the liquid service valve and add refrigerant to reach the fixed quanti...

30 English Installation Procedure Instal lation Pr oc edure Step 15 Fixing and insulating the connection part for refrigerant pipes CAUTION • Before wrapping the connection part for refrigerant pipes, be sure to check whether there is gas leakage on the connection part. 1 Wrap the foam insulation ar...

31 English Instal lation Pr oc edure 2 Insert the end of the drain hose to the extension drain hose to make a connection. 3 Tightly wrap the connection part with a cable tie or tape for fixing. Connecting drain hose Insulation (foamed polyethylene) Drain hole for duct (polypropylene) Drain hose • Wh...

32 English Installation Procedure Instal lation Pr oc edure Step 19 Performing the final check and trial operation 1 Check the power supply between the outdoor unit and the auxiliary circuit breaker. • 1 phase power supply: L, N • 3 phases power supply: R, S, T, N 2 Check the indoor unit. • Check th...

35 English Instal lation Pr oc edure Step 20 Pumping down refrigerant WARNING • After installing the product, be sure to perform leak tests on the piping connections. After pumping down refrigerant to inspect or relocate the outdoor unit, be sure to stop the compressor and then remove the connected ...

36 English Appendix Appendix Troubleshooting The table below lists the self-diagnostic routines. For some of error codes, you must contact an authorized service centre. If an error occurs during the operation, it is displayed on the outdoor unit PCB LED, both MAIN PCB and INVERTER PCB. No. Error Cod...

38 English Appendix Appendix COMMISSION DELEGATED REGULATION (EU) No 626/2011 i) PRODUCT FICHE (ENERGY LABELLING OF AIR CONDITIONERS) ii) A Supplier's name - Samsung B Model name (Indoor/Outdoor) - AC100BNPDKH/AC100BXPDKH C Sound Power Level (Indoor/Outdoor) dB(A) 60 / 70 D Refrigerant name ¹⁾ - R-4...