Samsung AC052MN4DKH/EU - Manuals

Safety Information 5 English CAUTION Install your appliance on a level and hard floor that can support its weight. ࡛ ˜ɇ̷̈̈͝˝ϩͱʒͱϑͱ͔ɇцθʪϑЇ̷ϩ̈͝ɇɵ͝ͱθ͔ɇ̷Ӭɵθɇϩ̈ͱ͝ϑࡥ͝ͱ̈ϑʪࡥͱθΧθͱɵ̷ʪ͔ϑӥϩ˵ the product. Install the drain hose properly so that water is drained correctly. ࡛ ˜ɇ̷̈̈͝˝ϩͱʒͱϑͱ͔ɇцθʪϑЇ̷ϩ̈͝иɇϩʪθͱЭʪθ˙̷ͱ...

Safety Information Safety Information 6 English FOR USING WARNING If the appliance is flooded, please contact your nearest service centre. ࡛ Failing to do so may result in electric shock or fire. If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately ...

Safety Information 7 English After unpacking the air conditioner, keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. ࡛ Ã˙ɇʀ˵̷̈ʒΧ̷ɇʀʪϑɇɵɇ˝ͱЭʪθ̈ϩϑ˵ʪɇʒࡥ̈ϩ͔ɇцθʪϑЇ̷ϩ̈͝ϑЇ˙˙ͱʀɇϩ̈ͱ͝࢏ Do not touch the front panel with your hands or fingers dur...

Safety Information Safety Information 8 English CAUTION Do not place objects or devices under the indoor unit. ࡛ Water dripping from the indoor unit may result in fire or property damage. Check that the installation frame of the outdoor unit is not broken at least once a year. ࡛ ˜ɇ̷̈̈͝˝ϩͱʒͱϑͱ͔ɇцθʪϑЇ...

Safety Information 9 English This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsib...

At a Glanc e 10 English Indoor Unit Overview Main parts 1WAY (PC1NUSMAN/PC1BWSEAN/PC1NUPMAN, PC1BWPEAN) 02 03 04 01 01 Display 02 ̈θ˙̷ͱиɵ̷ɇʒʪ 03 ťɇ͝ʪ̷ 04 ̈θ̈͝ϩɇ̧ʪ Indication Function ŵʪ͔ͱϩʪʀͱ͝ϩθͱ̷ϑʪ͝ϑͱθ Operation indicator Timer indicator đͱʒʪ̷͝ͱϩʪαЇ̈ΧΧʪʒӥϩ˵Ɗࣛť̷ɇϑ͔ɇ̈ͱ͝ࡤ˜ɇ̈͝͝ʒ̈ʀɇϩͱθđͱʒʪ̷ʪαЇ̈ΧΧʪʒӥϩ˵...

At a Glanc e 11 English 4WAY (PC4NUSKAN) 01 04 03 02 01 Display 02 ̈θ˙̷ͱиɵ̷ɇʒʪ 03 ̈θ̈͝ϩɇ̧ʪ 04 ̈θ˙̷̈ϩʪθ࣑Ї͝ʒʪθϩ˵ʪ˝θ̷̷̈ʪ࣒ Indication Function On/Off operation indicator ŵʪ͔ͱӬ͝˝˙θͱϑϩ̈͝ʒ̈ʀɇϩͱθ Timer indicator Filter reset indicator ŵʪ͔ͱϩʪʀͱ͝ϩθͱ̷ϑʪ͝ϑͱθ NOTE ࡛ Your air conditioner and display may look ϑ̷̈...

At a Glanc e 12 English Operation Features Operating temperature and humidity Mode Outdoor temperature Indoor temperature Indoor humidity Cool mode -15°C to 50°C 18°C to 32°C 80% or less Heat mode -20°C to 24°C 30°C or less - Dry mode -15°C to 50°C 18°C to 32°C 80% or less CAUTION ࡛ Ã˙цͱЇЇϑʪϩ˵ʪɇ̈θʀͱ...

Cl eaning and Maint enanc e 13 English Cl eaning and Maint enanc e Cleaning and Maintaining Cleaning the indoor unit exterior 1WAY Ǯ̈Χʪϩ˵ʪϑЇθ˙ɇʀʪͱ˙ϩ˵ʪЇ̈͝ϩӥϩ˵ɇϑ̷̈˝˵ϩ̷циʪϩͱθʒθцʀ̷ͱϩ˵и˵ʪ͝͝ʪʪʒʪʒ࢏Ǯ̈Χʪͱ˙˙ʒ̈θϩͱ˙ͱʒʒࣛϑ˵ɇΧʪʒɇθʪɇϑɵцЇϑ̈͝˝ɇϑͱ˙ϩɵθЇϑ˵࢏ CAUTION ࡛ Do not use alkaline detergent, sulphuric acid, hydro...

Cl eaning and Maint enanc e 14 English Cleaning and Maintaining Cl eaning and Maint enanc e Cleaning the air filter CAUTION ࡛ 9ʪ˙ͱθʪʀ̷ʪɇ̈͝͝˝ࡥɵʪϑЇθʪϩͱϩЇθ͝ͱ˙˙ϩ˵ʪΧθͱʒЇʀϩɇ͝ʒθʪ͔ͱЭʪϩ˵ʪΧͱиʪθΧ̷Ї˝࢏࡛ 9ʪϑЇθʪϩͱ˵ͱ̷ʒϩ˵ʪ˝θ̷̷̈ʪӥϩ˵ɇ˵ɇ͝ʒϩͱΧθʪЭʪ͝ϩʒθͱΧΧ̈͝˝˙θͱ͔ϩ˵ʪͱΧʪ̈͝͝˝ͱ˙ϩ˵ʪ˙θͱ͝ϩ˝θ̷̷̈ʪ࢏ 1 WAY 1 Detaching the air filte...

Cl eaning and Maint enanc e 15 English Cl eaning and Maint enanc e PC1NUPMAN Insert a driver at the marked points and open the front grille. ťθʪϑϑϩ˵ʪ Push signs on the air filter. θɇɵϩ˵ʪ˵ɇ͝ʒ̷ʪͱ˙ϩ˵ʪɇ̈θ˙̷̈ϩʪθɇ͝ʒΧЇ̷̷̈ϩͱЇϩ from the indoor unit. PC1NWSMAN Insert your hand into the front grille and pullo...

Cl eaning and Maint enanc e 16 English Cleaning and Maintaining Cl eaning and Maint enanc e 2 Cleaning the air filter A̷ʪɇ͝ϩ˵ʪɇ̈θ˙̷̈ϩʪθӥϩ˵ɇЭɇʀЇЇ͔ʀ̷ʪɇ͝ʪθͱθϑͱ˙ϩɵθЇϑ˵࢏Ã˙ʒЇϑϩ̈ϑϩͱͱ˵ʪɇЭцࡥϩ˵ʪ͝θ̈͝ϑʪ̈ϩӥϩ˵θЇ̈͝͝͝˝иɇϩʪθɇ͝ʒʒθц̈ϩ̈͝ɇЭʪ͝ϩ̷̈ɇϩʪʒɇθʪɇ࢏ CAUTION Uͱ͝ͱϩϑʀθЇɵϩ˵ʪɇ̈θ˙̷̈ϩʪθӥϩ˵ɇɵθЇϑ˵ͱθͱϩ˵ʪθ cleaning utensil...

Cl eaning and Maint enanc e 17 English Cl eaning and Maint enanc e 3 ŵʪɇϑϑʪ͔ɵ̷̈͝˝ϩ˵ʪɇ̈θ˙̷̈ϩʪθ CAUTION ࡛ Ã˙ϩ˵ʪ̈͝ʒͱͱθЇ̈͝ϩ̈ϑЇϑʪʒӥϩ˵ͱЇϩϩ˵ʪɇ̈θ˙̷̈ϩʪθࡥ ̈ϩ͔ɇцɵʪʒɇ͔ɇ˝ʪʒʒЇʪϩͱʒЇϑϩ࢏ 4 ŵʪϑʪϩϩ̈͝˝ϩ˵ʪɇ̈θ˙̷̈ϩʪθ ˙ϩʪθʀ̷ʪɇ̈͝͝˝ɇ͝ʒθʪɇϑϑʪ͔ɵ̷̈͝˝ϩ˵ʪɇ̈θ˙̷̈ϩʪθࡥɵʪϑЇθʪϩͱθʪϑʪϩϩ˵ʪ˙̷̈ϩʪθࣛʀ̷ʪɇ̈͝͝˝θʪ͔̈͝ʒʪθɇϑ˙ͱ̷̷ͱиϑࡤ࡛ Ã͝ʒͱͱθЇ̈͝ϩӥϩ˵...

Cl eaning and Maint enanc e 21 English Cl eaning and Maint enanc e Periodical maintenance Unit Maintenance item Interval Requires qualified technicians Indoor unit Clean the air filter. ϩ̷ʪɇϑϩͱ͝ʀʪɇ͔ͱ͝ϩ˵ Clean the condensate drain pan. Once a year ŵʪαЇ̈θʪʒ Clean up the heat exchange. Once a year ŵʪαЇ...

Cl eaning and Maint enanc e 22 English Cleaning and Maintaining Cl eaning and Maint enanc e Troubleshooting ŵʪ˙ʪθϩͱϩ˵ʪ˙ͱ̷̷ͱӥ͝˝ʀ˵ɇθϩ̈˙ϩ˵ʪɇ̈θʀͱ͝ʒ̈ϩ̈ͱ͝ʪθͱΧʪθɇϩʪϑɇɵ͝ͱθ͔ɇ̷̷ц࢏Ɵ˵̈ϑ͔ɇцϑɇЭʪϩ͔̈ʪɇ͝ʒ unnecessary expense. Problem Solution The air conditioner does not operate at all. ࡛ A˵ʪʀ̧̈˙ϩ˵ʪΧͱиʪθΧ̷Ї˝̈ϑΧθͱΧʪ...

Cl eaning and Maint enanc e 25 English Cl eaning and Maint enanc e Technical specifications Type Model New weight Net dimension(W x D x H) Indoor unit AߢߤߨđĘߣUç²ࢩkƸ 9.5 kg 970 mm x 410 mm x 135 mm AߢߥߧđĘߣUç²ࢩkƸ 9.5 kg 970 mm x 410 mm x 135 mm AߢߧߤđĘߦUç²ࢩkƸ 15.0 kg 840 mm x 840 mm x 204 mm AߢߩߣđĘߦUç²...

COUNTRY CALL OR VISIT US ONLINE AT Ƹç ߢߥߥߢƊđƊƸʝ࣑ߩߤߨߩߪߨߦ࣒ иии࢏ϑɇ͔ϑЇ͝˝࢏ʀͱ͔ࢩЇ̧ࢩϑЇΧΧͱθϩ ÃŵkøĘU࣑kÃŵk࣒ 0818 717100 иии࢏ϑɇ͔ϑЇ͝˝࢏ʀͱ͔ࢩ̈ʪࢩϑЇΧΧͱθϩ kŵđĘǽ ߢߨߣ߫ߨߩߩߧߧߧߩߩࡒĮƟ² иии࢏ϑɇ͔ϑЇ͝˝࢏ʀͱ͔ࢩʒʪࢩϑЇΧΧͱθϩ ˜ŵĘAk ߢߣߦߪߨߥߢߢߢߢ иии࢏ϑɇ͔ϑЇ͝˝࢏ʀͱ͔ࢩ˙θࢩϑЇΧΧͱθϩ ÃƟøà ߪߢߢࣛƊđƊƸʝ࣑ߪߢߢ࢏ߩߤߨߩߪߨߦ࣒ иии࢏ϑɇ͔ϑЇ͝˝࢏ʀͱ͔ࢩ̈ϩࢩϑЇΧΧͱθϩ ƊťÃĘ ߢߢߥߦ߫ߢߤ...

5 Installation Pr ocedur e English Installation Procedure Step 1 Checking and preparing accessories The following accessories are supplied with the indoor unit. The type and quantity may differ, depending on the specifications. 1 way Cassette Pattern sheet A (1) Pattern sheet B (1) Insulation pipe (...

9 Installation Pr ocedur e English Step 3 Optional: Insulating the body of the indoor unit If you install a cassette type indoor unit on the ceiling when temperature is over 27°C and humidity is over 80%, you must apply an extra 10 mm thick polyethylene insulation or a similar type of insulation to ...

10 Installation Procedure Installation Pr ocedur e English Step 4 Installing the indoor unit When deciding on the location of the air conditioner the following restrictions must be taken into account. 1 Place the pattern sheet on the ceiling at the spot where you want to install the indoor unit. NOT...

11 Installation Pr ocedur e English 1 way Cassette Level vinyl tube Gauge of dimensions <Side view> 15 mm Ceiling Ceiling 15 mm 4 way Cassette Indoor unit Ceiling Gauge of dimensions 17 mm 20 mm Step 5 Purging inert gas from the indoor unit The indoor unit comes with nitrogen gas (inert gas) c...

12 Installation Procedure Installation Pr ocedur e English 5 Check that the flaring is correct, referring to the illustrations below for examples of incorrect flaring. Correct Inclined Damaged Surface Cracked Uneven Thickness Step 7 Connecting the assembly pipes to the refrigerant pipes There are tw...

13 Installation Pr ocedur e English Step 8 Performing the gas leak test To identify potential gas leaks on the indoor unit, inspect the connection area of each refrigerant pipe using a leak detector for R-410A. Before recreating the vacuum and recirculating the refrigerant gas, pressurize the whole ...

14 Installation Procedure Installation Pr ocedur e English 5 Select the insulation of the refrigerant pipe. ŷ Insulate the gas side and liquid side pipe, noting the insulation thickness that must differ according to the pipe size. ŷ Standard: Less than an indoor temperature of 30°C, with humidity at...

15 Installation Pr ocedur e English ŷ Install air ventilation to drain condensation smoothly. Air ventilation Ceiling ŷ If it is necessary to increase the height of the drain pipe, install the drain pipe straight within 300 mm from the drain hose port. If it is raised higher than 550 mm, there may b...

16 Installation Procedure Installation Pr ocedur e English Step 11 Performing the drainage test 1 Do a leak test at the connection part of the flexible hose and the drian pipe: a Connect a general hose to the connection part of the flexible hose of the indoor unit, and pour in some water. Hose Flexi...

17 Installation Pr ocedur e English Step 12 Connecting the power and communication cables CAUTION ŷ Always remember to connect the refrigerant pipes before performing the electric connections. When disconnecting the system, always disconnect the electric cables before disconnecting the refrigerant p...

18 Installation Procedure Installation Pr ocedur e English Indoor power supply Power supply Max/Min(V) Indoor power cable 220 to 240V, 50 Hz ±10% 0.75 to 1.5 mm², 3 wires Communication cable 0.75 to 1.5 mm², 2 wires AC power: M4 screw Communication: M3.5 screw 11 13 7.5 9.0 18 13.8 7LJKWHQLQJWRUTXHN...

19 Installation Pr ocedur e English 3 Insert both sides of core wire of the power cable into the connection sleeve. ŷ Method 1 : Push the core wire into the sleeve from both sides. ŷ Method 2 : Twist the wire cores together and push it into the sleeve. Connection sleeve Connection sleeve Method 1 Me...

20 Installation Procedure Installation Pr ocedur e English Step 14 Setting the indoor unit addresses and the installation options You cannot set both of the indoor unit addresses and the installation options in a batch: set both of them respectively. Common steps for setting the addresses and option...

21 Installation Pr ocedur e English Take the steps presented in the following table: Steps Remote control display 1 Set the SEG2 and SEG3 values: a Set the SEG2 value by pressing the (Low Fan) button repeatedly until the value you want to set appears on the remote control display. SEG2 b Set the SEG...

24 Installation Procedure Installation Pr ocedur e English Steps Remote control display 17 Set the SEG21 and SEG22 values: a Set the SEG21 value by pressing the (Low Fan) button repeatedly until the value you want to set appears on the remote control display. SEG21 b Set the SEG22 value by pressing ...

25 Installation Pr ocedur e English 5 Check whether the air conditioner operates in accordance with the option values you have set: a Reset the indoor or outdoor unit. ŷ Indoor unit : Press the (Set) and (Low Fan) buttons on the remote control simultaneously for 4 seconds. ŷ Outdoor unit : Press the...

26 Installation Procedure Installation Pr ocedur e English CAUTION ŷ The main address must be set to a value in the range 0 to 14. If you set other values, communication error will occur. ŷ If any of SEG5 and SEG6 is set to a value in the range A to F, the main address of the indoor unit does not ch...

28 Installation Procedure Installation Pr ocedur e English ŷ Even if you set the Use of drain pump (SEG8) option to 0, it is automatically set to 2 (the drain pump is used with 3 minute delay). ŷ If you set the Maximum filter usage time (SEG18) option to a value other than 2 and 6, it is automatical...

30 English Troubleshooting Appendix Troubleshooting 1 way Cassette Abnormal conditions LED lamp display Remarks Operation Defrost Timer Fan Filter reset Blue Yellow Power reset X X X X Error of temperature sensor in the indoor unit (Open/Short) X X X X Error of heat exchanger sensor in the indoor un...