Robinhood RWC3CL6WHT - Manuals

Page 2 - Contents; DISPOSAL INFORMATION

Contents Congratulations! Thank you for choosing one of our appliances. Before you use the appliance, we strongly recommend that you read through the whole user manual which provides important safety instructions and description of the product and the proper use of its functions. To avoid the ever‐p...

Page 3 - Important Safety Instructions; IMPORTANT

1 Important Safety Instructions IMPORTANT : Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. In certain circumstances electrical appliances may be a safety hazard. 2. This appliance is not intended for use by perso...

Page 4 - Appliance Details; General Information

2 Appliance Details Voltage and Frequency: 220‐240V 50Hz Lamp Max: RWC3CL6SS: 2 x 3W GU10 LED RWC3CL9SS: 2 x 3W GU10 LED RWC3CL6WHT: 2 x 3W GU10 LED Rated Input Power: RWC3CL6SS: 196W RWC3CL9SS: 196W RWC3CL6WHT: 196W General Information Before installing and operating the rangehood, carefully read t...

Page 5 - Uniduct item numbers; round outlet

3 Pre-Installation Ducting Options Ducting Options The method of ducting should be carefully considered before installing the rangehood. The guide below recommends the ducting components to use for all common ducting configurations ‐ through the top of the home (for the roof and soffit) and through ...

Page 6 - Installation position; Minimum; Notes

4 Pre-Installation Installation position A. Minimum height from the hob surface to the underside face of the rangehood: 650mm . Notes : If the instructions for the gas hob specify a greater distance, this has to be taken into account. Any installation above 750mm will compromise performance. B. Vert...

Page 7 - Installation; Warning

5 Installation Mounting to a stud is recommended. However, if fitted to other wall linings (plasterboard, concrete etc) suitable fixings will be required. Before drilling any holes check that the wall and ceiling are clear of any electrical cables, pipes etc. 1. Pre drill pilot holes in the position...

Page 8 - Recirculation mode

6 Installation 5. Connect and secure the ducting (use duct tape if required). 6. Remove the protective plastic covering from all parts including the filters. Fit the canopy hood on the fixing bracket. Mark and drill the two holes required for the safety screws. Secure the canopy in place with the sa...

Page 9 - Operating Instructions; Controls; Cleaning and Maintenance; General Maintenance; Switch off the rangehood before cleaning or maintenance.; Filter Maintenance

7 Operating Instructions Controls Power On / Off Speed 1 Speed 2 Speed 3 Lights On / Off Light The light can be operated independently from the fan and is controlled in accordance with the graphics printed above. Fan The fan is operated by turning the power switch on. It can be run at three differen...

Page 10 - Replacing the Lights

8 Replacing the Lights Warning: Before attempting to replace the lights, ensure that the appliance is switched off and unplugged from the wall socket. Ensure that the light is cool before touching. • Remove the aluminium filter. • Press the light face and turn anti‐clockwise to remove. • Replace wit...