Rangemaster U109952 - 02 - Manuals

Rangemaster U109952 - 02 – Manual in PDF format online.

Manuals:

Manual

Manual Rangemaster U109952 - 02

Summary

Page 2 - Contents; Fan Oven Cooking Table

Contents 1. Before You Start... 1 2. Cooker Overview 3 3. Cooking Tips 11 4. Fan Oven Cooking Table 12 5. Cleaning Your Cooker 13 6. Troubleshooting 16 7. Installation 18 8. Servicing 22 9. Circuit Diagrams 27 10. Technical Data 29

Page 3 - Installation and Maintenance; Make sure that the cooker is wired in and switched on.; Peculiar Smells; ‘Ventilation’; Ventilation; : The functions of this hob comply with

1 1. Before You Start... Thank you for buying a Rangemaster cooker. It should give you many years of trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used an induction cooker before.  This appliance i...

Page 4 - Hob Care; DO NOT use the hob surface as a cutting board.; place anything between the base of the pan and the; Cooker Care; Clean only the parts listed in this guide.

2  Use dry oven gloves when applicable – using damp gloves might result in steam burns when you touch a hot surface. Do not use a towel or other bulky cloth in place of a glove – it might catch ﬁre if brought into contact with a hot surface.  NEVER operate the cooker with wet hands.  DO NOT use a...

Page 5 - The Hob; The kind of pan you use and the

3 ArtNo.312-0004 Correct pans ceramic 2. Cooker Overview The 90 induction cooker (Fig.2-1) has the following features: A. 5 induction cooking zones B. A control panel C. A grill D. Main programmable fan oven E. Tall fan oven The Hob Use only pans that are suitable for induction hobs. We recommend st...

Page 6 - 10 Induction hob display; After use, switch off the hob element by its; Residual Heat Indicator,

4 ArtNo.313-0003 110 Induction hob display � � � � � Make sure that the base of the pan is clean and dry to prevent any residue burning onto the hob panel. This also helps prevent scratches and deposits. Always use pans that are the same size as (or slightly larger than) the areas marked on the hob....

Page 7 - This can only be activated when all the; Boil Dry Function; The Grill

5 ArtNo.240-0001 - Toledo grill control Once the [ A ] is displayed, turn the control knob to the level of your choice (1 to 9). The pan will heat up at 100% power for a speciﬁed time before the power is reduced to the level selected. When the Automatic Heat-up function is activated, the hob control...

Page 8 - Never close the grill door when the grill is on.; The Ovens; Both ovens are fanned ovens

6 The grill trivet can be turned over to give two grilling positions (Fig.2-9) . For best results, you should leave the grill pan in the grill chamber and preheat the appropriate part(s) of the grill for two minutes. The grill trivet can be removed and the food placed on it while you are waiting for...

Page 9 - The Clock; Setting the time of day; A B C D E F

7 The Clock Setting the time of day The LCD clock is shown in (Fig 2-13) . When the clock is ﬁrst connected the display ﬂashes ( 0.00 ) and (  ) alternately. Press and hold both the [  ] and [  ] buttons as shown in Fig.2-14 . While holding these buttons press either the (–) or (+) until the corr...

Page 10 - Key Lock; To activate the key lock

8 AUTO is showing, you want to reset to manual cooking When cancelling an automatic setting, any cooking time already set must be returned to ( 0.00 ) before you can return to manual, by pressing the (  ) button. Key Lock When the key lock is activated, the left-hand oven is locked and will not com...

Page 11 - Accessories

9 ArtNo.320-0010 Flat & drop shelves � � ArtNo.320-0013 Removing the shelf 3 ArtNo.320-0014 Handyrack on LH door ArtNo.320-0015 Fitting the Handyack 1 Fig.2-32 Fig.2-33 ArtNo.320-0016 Fitting the handyrack 2 Fig.2-34 Accessories Oven Shelves – Left-hand (Main) Oven In addition to the ﬂat shelves...

Page 12 - Main Oven Light; Press the button to turn the light on

10 Main Oven Light Press the button to turn the light on (Fig.2-35) . If the oven light fails, turn oﬀ the power supply before changing the bulb. See the ‘Troubleshooting’ section for details on how to change the bulb. ArtNo.320-0028 - Oven light Toledo induction Fig.2-35

Page 13 - Tips on Cooking with the Timer; DO NOT place warm food in the oven to be timed.; General Oven Tips; ‘Cleaning Your Cooker’

11 Tips on Cooking with the Timer If you want to cook more than one dish, choose dishes that require approximately the same cooking time. However, dishes can be ‘slowed down’ slightly by using small containers and covering them with aluminium foil, or ‘speeded up’ slightly by cooking smaller quantit...

Page 15 - Cleaning Your Cooker; but take care that no surplus water seeps into the; Hob; Daily Care; ‘Cleaning burned-on spills’; Use an oven glove to protect your hand from; ‘Daily Care’; Cleaning Burned-on Spills

13 5. Cleaning Your Cooker Isolate the electricity supply before carrying out any major cleaning. Allow the cooker to cool. Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not mix diﬀerent cleaning pro...

Page 16 - Grill; DO NOT use any abrasive substances.; Control Panel and Doors; ‘Moving the Cooker’; Door Panel; ‘Cook & Clean’ Panels

14 ArtNo.320-0002a Proplus oven door side screws Fig.5-2 Once you have removed as much as possible with the scraper, follow the ‘Daily Care’ procedure outlined above. Grill The grill pan and grid should be washed in hot soapy water. After grilling meats or any foods that soil, leave to soak for a fe...

Page 17 - The Tall Oven

15 Removing the Panels to clean the Enamel Interior If you wish to clean the enamel interior of the oven, you will ﬁrst need to remove the shelves and oven panels. The main fanned oven has a removable oven roof. Slide the roof liner forwards and remove (Fig.5-3) . Each side of the oven is ﬁxed with ...

Page 20 - ‘Electrical Connection’; Provision of Ventilation; You will also need the following tools:

18 7. Installation Dear Installer Before you start your installation, please complete the details below, so that, if your customer has a problem relating to your installation, they will be able to contact you easily. Safety Requirements The cooker must be installed in a well-ventilated space, in acc...

Page 21 - Positioning the Cooker; ABOVE; Unpacking the Cooker; The cooker is very heavy, so take great care.

19 ArtNo.090-0024 - 90 induction door clearances �� ArtNo.090-0008 - 90 6BC cooker min spacing �� ArtNo.090-0017 - 90 6BC min positions above cooker �� Fig.7-1 Fig.7-2 ArtNo.010-0001 Removing the packaging Fig.7-3 Fig.7-4...

Page 22 - Lower the Two Rear Rollers; First fit the levelling tool on the hexagonal adjusting nut; Completing the Move; . Check behind the cooker to ensure; Levelling

20 Lower the Two Rear Rollers First ﬁt the levelling tool on the hexagonal adjusting nut (Fig.7-5) . Make 10 complete (360º) turns clockwise (Fig.7-6) . (This means turning and removing the levelling tool 20 times.) Make sure you lower BOTH REAR ROLLERS. There are two adjusting nuts, one for each ro...

Page 23 - Electrical Connection; The cooker must be connected to the correct electrical; Hob Check; Turn on the grill control and check that the grill heats up.; Oven Check

21 Electrical Connection The cooker must be installed by a qualiﬁed electrician, in accordance with all relevant British Standards/Codes of Practice (in particular BS 7671), or with the relevant national and local regulations.  WARNING: THE APPLIANCE MUST BE EARTHED. Note: The cooker must be connec...

Page 24 - To Lift up the Ceramic Hob; To Remove the Control Panel; To Replace a Hob Element; Removing the end caps

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have ﬁnished. 22 8. Servicing  Disconnect the cooker from the electricity supply before servicing, particularly before removing any of the following: con...

Page 25 - To Remove the Electronic Timer; To Replace a Thermostat; To Replace the Grill Controller

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have ﬁnished. 23 5. To Replace the Light Switch Disconnect from electricity supply. Remove the control panel (see 1). Note: The old switch may be destroye...

Page 28 - To Remove Grill Element; To Change Oven Light Bulb

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have ﬁnished. 26 21. To Replace an Oven Fan Disconnect from electricity supply. Pull the cooker forward to gain access to the rear. Remove the screws secu...

Page 29 - Key; Code Description

27 Key The connections shown in the circuit diagram are for single-phase. The ratings are for 230V 50Hz. 9. Circuit Diagram: Oven ArtNo.080-0032 90 induction (oven) circuit diagram �� 12-way connector 12-way connec...

Page 31 - INSTALLER: Please leave these instructions with the User.; Connections; Electric; Dimensions; Ratings; Large

29 10. Technical Data INSTALLER: Please leave these instructions with the User. DATA BADGE LOCATION : Cooker back, serial number repeater badge below oven door opening. Connections Electric 220 - 240V 50Hz Dimensions Overall height minimum 902mm maximum 927mm Overall width 900mm Overall depth 650mm ...