Rangemaster RMG2H90SS - Manuals

Rangemaster RMG2H90SS – Manual in PDF format online.

Manuals:

Manual

Manual Rangemaster RMG2H90SS

Summary

Page 2 - EN

EN 2 2 Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS ......................................................................................................................3 CHARACTERISTICS ......................................................................................................

Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION

EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accord- ingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting...

Page 4 - CHARACTERISTICS; Dimensions

Page 6 - Wall drilling and bracket fixing; centre of the area in which the hood will be installed.

EN 6 6 INSTALLATION Wall drilling and bracket fixing 7.2.1 11 12a X 116 1÷2 116 1040 450 mm min Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 1040 mm a...

Page 7 - Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM

EN 7 7 Mounting the hood body • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the screws 12a. • Fully tighten support screws 12a. • Adjust screws Vr to level the hood body. 12a Vr Connections DUCTED VERSION AIR EXHAUST...

Page 8 - ELECTRICAL CONNECTION; Flue assembly

EN 8 8 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan...

Page 9 - USE; Control Panel; KEY

EN 9 9 USE L S1 T1 T2 T3 T4 Control Panel The hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 button. KEY LED FUNCTIONS L 0/1 Light Turns lighting on and off. T1 0/1 Motor on First speed. When pressed for about 1 seconds the motor is switched of...

Page 10 - MAINTENANCE; Cleaning the Comfort Panels; • Clean the inside as well using a damp cloth and neutral deter-

EN 10 10 MAINTENANCE REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. Cl...

Page 11 - Grease filters; CLEANING METAL SELF- SUPPORTING GREASE FIL-; • Wash the filters, taking care not to bend them. Allow

EN 11 11 Grease filters CLEANING METAL SELF- SUPPORTING GREASE FIL- TERS Alarm signal reset • Switch off the lights and extractor motor. • Press button T3 for at least 3 seconds, until the leds start to flash. Cleaning the filters • The filters are washable and must be cleaned at least every 2 month...

Page 12 - Activated charcoal filter (Recirculation version); at a later date. Turn the Lights and the suction Motor off.; REPLACING THE ACTIVATED CHARCOAL FILTER; fixing hooks; Lighting; LIGHT REPLACEMENT; out of from the Hood.

EN 12 12 Activated charcoal filter (Recirculation version) The filter is not washable and cannot be regenerated. It must be replaced when led S1 flashes or at least every 4 months. The alarm signal will only light up when the extractor motor is swi-tched on. Alarm signal activation • In Recirculatio...

Page 16 - AGA RANGEMASTER LTD.