Page 2 - Contents; Cleaning Your Hob
Contents 1. Before You Start... 1 2. Hob Overview 3 3. Cleaning Your Hob 5 4. Troubleshooting 7 5. Installation 8 6. Conversion to LPG Gas 12 7. Circuit Diagram 13 8. Technical Data 14 9. Warranty/After Sales Service 15
Page 3 - If You Smell Gas...
1 Thank you for buying a Rangemaster hob. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used a gas hob before. This appliance is designed for domestic cooking only. U...
Page 4 - Cleaning
2 Cleaning In the interests of hygiene and safety, the hob should be kept clean at all times as a build up of fats and other foodstuffs could result in a fire. Clean only the parts listed in this guide. Clean with caution. If a wet sponge or cloth is used to wipe spills on a hot surface, be careful to...
Page 6 - Triple Ring burner; Hob Care
4 Pans and kettles with concave bases or down turned base rims should not be used (Fig.2-5) . Simmering aids, such as asbestos or mesh mats, are NOT recommended. They will reduce burner performance and could damage the pan supports (Fig.2-6) . You should also avoid using unstable and misshapen pans ...
Page 7 - Essential information; The single ring burners
5 ArtNo.316-0007 Gas burner � � � � � � Fig.3-1 ArtNo.316-0009 RG70 triple ring burner � � � � Fig.3-2 ArtNo.316-0010 RG70 triple ring burner � � Fig.3-3 A – Cap, B – Head, C – Notch, D – Base, E – FSD, F – Electrode A – Inner burner cap, B – Outer burner cap, C – Burner head, D – Burner base Essent...
Page 8 - Cleaning Table; Table 3-1 Cleaning the hotplate
6 Cleaning Table Refer to the cleaning tables ( Table 3-1 and Table 3-2 ) for details on cleaning the hob. The cleaners listed are available from supermarkets or electrical retailers. For enamelled surfaces use a cleaner that is approved fro use on vitreous enamel. The Vitreous Enamel Association ha...
Page 10 - INSTALLATION; Dear Installer; Provision of Ventilation; Location of the Hob; Conversion
8 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Dear Installer Before you start your installation, please complete the details BELOW. Should your customer have a problem relating to your installation they will be able to contact you easily. You must be aw...
Page 11 - Checking the Parts
9 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. You will need the following equipment to complete the hob installation satisfactorily: • Gas Pressure tester • Flexible gas hose • Multimeter You will also need the following tools: 1. Electric drill 2. Jigs...
Page 12 - Conversion to LP; Safety Information
10 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. For safety reasons curtains must not be fitted immediately behind the hotplate. Conversion to LP If the appliance is to be converted to LP gas do the conversion at this point. See the conversion section of t...
Page 13 - Electrical Connections; WARNING: THIS APPLIANCE MUST BE EARTHED; Plug Connection; The wires in the mains lead are coloured in; Hotplate checks; Customer Care
11 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Electrical Connections This appliance must be installed by a qualified electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply com...
Page 14 - WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON; Injectors; Conversion to LPG Gas
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. 12 Check in the ‘Technical Data’ section at the back of the instructions that the cooker is convertible to the gas you want to use. ...
Page 16 - Dimensions; Connections; Ratings
14 8. Technical Data The hob is an independent Class 3 built-in unit. This hob is category II 2H3 + It is supplied set for group H natural gas. A conversion kit from NG to LP gas is packed with the hob. INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Base of the hob. C...