Rangemaster RG60 - Manuals - manualsarea.com

Page 2 - Contents; Cleaning Your Hob

Contents 1. Before You Start... 1 2. Hob Overview 3 3. Cleaning Your Hob 5 4. Troubleshooting 6 5. Installation 7 6. Conversion to LPG Gas 11 7. Circuit Diagram 12 8. Technical Data 13 9. Warranty/After Sales Service 14

Page 3 - If You Smell Gas...; Ventilation

1 Thank you for buying a Rangemaster hob. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used a gas hob before.  This appliance is designed for domestic cooking only. U...

Page 4 - Cleaning

2 Cleaning In the interests of hygiene and safety, the hob should be kept clean at all times as a build up of fats and other foodstuﬀs could result in a ﬁre. Clean only the parts listed in this guide. Clean with caution. If a wet sponge or cloth is used to wipe spills on a hot surface, be careful to...

Page 6 - Hob Care

4 Pans and kettles with concave bases or down turned base rims should not be used (Fig.2-5). Simmering aids, such as asbestos or mesh mats, are NOT recommended. They will reduce burner performance and could damage the pan supports (Fig.2-6). You should also avoid using unstable and misshapen pans th...

Page 7 - The single ring burners; Cleaning Table; Table 3-1 Cleaning the hotplate

5 Essential information Allow the cooker to cool and then isolate the electricity supply before carrying out any thorough cleaning.  Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not mix diﬀerent cl...

Page 9 - INSTALLATION; Dear Installer; The relevant Building / IEE regulations; Provision of Ventilation; Location of the Hob

7 INSTALLATION Check the appliance is electrically safe and gas sound when you have ﬁnished. Dear Installer Before you start your installation, please complete the details BELOW. Should your customer have a problem relating to your installation they will be able to contact you easily. You must be aw...

Page 10 - Checking the Parts

8 INSTALLATION Check the appliance is electrically safe and gas sound when you have ﬁnished. You will need the following equipment to complete the hob installation satisfactorily: • Gas Pressure tester • Flexible gas hose • Multimeter You will also need the following tools: 1. Electric drill 2. Jigs...

Page 11 - Gas Connection; Safety Information

9 INSTALLATION Check the appliance is electrically safe and gas sound when you have ﬁnished. Gas Connection Before connecting the appliance, check that it is suitable for your gas and electricity supply. This information is on the data label ﬁxed to the underside of the hotplate. Gas connection must...

Page 12 - Electrical Connections; WARNING: THIS APPLIANCE MUST BE EARTHED; Plug Connection; The wires in the mains lead are coloured in; Hotplate checks; Customer Care

10 INSTALLATION Check the appliance is electrically safe and gas sound when you have ﬁnished. Electrical Connections This appliance must be installed by a qualiﬁed electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply com...

Page 13 - WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON; Injectors; Conversion to LPG Gas

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have ﬁnished. 11 Check in the ‘Technical Data’ section at the back of the instructions that the cooker is convertible to the gas you want to use. ...

Page 15 - Dimensions; Connections; Ratings

13 8. Technical Data The hob is an independent Class 3 built-in unit. This hob is category II 2H3 + It is supplied set for group H natural gas. A conversion kit from NG to LP gas is packed with the hob. INSTALLER: Please leave these instructions with the user.DATA BADGE LOCATION: Base of the hob.COU...