Rangemaster GLX490 RM - Manuals

EN 5 5 Components Ref. Q.ty Product components 1 1 Cooker hood with control unit, lights, blower unit, filters 2.1 1 Upper chimney 2.2 1 Lower chimney 8 1 Air outlet grid 9 1 Reducer flange Ø 150-120 10 1 Adapting ring ø 120-125 mm 14.1 2 Air Outlet Connection Extension 15 1 Air Outlet Connection 16...

EN 6 6 INSTALLATION Hood body mounting • Firstly, it is necessary to adjust the two Vr- screws of the 11a- brackets, at minimun ( B ). • Hang the hood body on the two brackets 11a . • Connect the hood to the mains supply by means of a bipolar switch with at least 3 mm contact gap. • Press the “ A ”-...

EN 7 7 RECYCLING VERSION AIR OUTLET To install the hood in recycling version, the optional charcoal filter kit must be purchased. • Remove the chimney angle bracket. • Screw the filter cover onto the air outlet, using four screws 12c (2.9 x 12.5). • Fix the air outlet grid 8 on the recirculation air...

EN 8 8 Flue assembly Upper exhaust flue • Slightly widen the two sides of the upper flue and hook them behind the brackets 7.2.1 , making sure that they are well seated. • Secure the sides to the brackets using the 4 screws 12c (2,9 x 9,5) supplied. • Make sure that the outlet of the extensions piec...

EN 9 9 USE Control panel Key Function Display A Upper panel closed: when pressed for about one sec-ond it opens the upper panel. It switches the motor on at the latest selected speed. Upper panel open: when shortly pressed it switches the motor on/off. Indicates the selected speed. B Decreases the s...

EN 1 10 REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. Remote control ...

EN 1 11 MAINTENANCE Metal grease filters Filters can be washed in the dish machine. They need to be washed when Drop- sign appears on the display or in any case every 2 months, or even more frequently in case of particularly intensive use of the hood. Alarm reset • Press the G –key for at least 2 se...

EN 1 12 Charcoal filter (recycling version) This filter cannot be washed or regenerated. It must be replaced when the C appears on the display or at least once every 4 months. The filter saturation alarm has to be activated already before. Activation of the alarm signal • In the recycling version ho...

EN 1 13 Replacing the fuser The hood panel opening and closing mechanism is con-trolled by a starter motor which is activated by a fuser. This fuser works only on the starter motor. In case the fuser gets damaged when the panel is closed it is be necessary to manually unblock the panel. In this case...