Prolux 19prolux2.0c - Manuals

Do not vacuum or clean: - Hair and other parts of the body. They could be sucked in and cause injury. - Pieces of Clothing (e, g, shoe laces, scarves, etc.). They could be sucked in and cause injury. - Water and other liquids, especially moisture from carpet cleaning agents. Moisture inside the appl...

GETTING TO KNOW YOUR BACKPACK VACUUM 1. Main Motor Unit 2. Dust Container 3. Flexible Hose 4. Shoulder Straps 5. Exhaust HEPA Filter 6. Air Inlet Vortex Filter 7. Carpet/Floor Brush 8. Crevice Tool 9. Upholstery/Pet Hair tool 10. Dusting Brush 11. Quick Adjusting Telescoping Wand 12. ON/OFF Power Sw...

ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: ​ Always remove the power plug from the wall outlet before assembling or removing accessories. ATTACHING THE FLEXIBLE HOSE & TELESCOPIC WAND TO THE VACUUM The flexible hose should be connected before strapping the unit on. 1. To connect the flexible hose...

USING THE ATTACHMENTS DUSTING BRUSH The Dusting Brush is used for all types of furniture. (Fig 3) CREVICE TOOL Use for cleaning radiators, cracks & crevices along corners, baseboards, and in-between cushions. (Fig 4) PET HAIR REMOVAL BRUSH The unique design makes it an excellent tool for removin...

PROPER VACUUMING TECHNIQUE WITH THE PROLUX 2.0 FLOOR TOOL When vacuuming with your Prolux 2.0, you may vacuum using the standard forward and backwards vacuuming motion as you would with standard vacuum cleaners. However, because of the new Prolux 2.0 floor tool design, you can vacuum an area by vacu...

HOW TO CHARGE THE BATTERY PACK When using the charger, basic precautions should always be followed, including the following: BATTERY AND CHARGING SAFETY To reduce the risk of electric shock, fire, battery explosion, or injury: Basic information and warning for the Battery and Charger are contained b...

SPECIFICATIONS AND PARTS Charger Specification: Charger input: 120V 50/60Hz AC only Charger output: 30V 1A Battery Specification: Lithium Polymer chemistry 25.2V Approximate charge time: 8 hours Approximate run time for new battery: 30 minutes. (1 - Battery pack) (2 - Charger) OPERATION Charge in a ...

PREPARING BATTERY PACK FOR CHARGING 1. Turn off the power switch. Confirm the switch is in the off position. 2. Unlock the battery pack from the vacuum by pulling up on the metal battery hook located on the top of the battery, and take the battery pack out from the vacuum. (Fig 17) 3. Plug the round...

HOW TO EMPTY THE DUST CONTAINER The dust container must be emptied as soon as it reaches the “MAX” mark indicated on the outside of the tank, or if the suction power has dropped. To empty the Dust Container, please follow the instructions below: 1. Switch the vacuum cleaner to the “Off” position and...

NOTE: ​ The Prolux Self-Cleaning Vortex filter only needs to be cleaned when the entire surface of the filter becomes dirty. Due to its highly efficient design the Self-Cleaning Vortex filter is three times more efficient than standard filters and will have the same amount of airflow whether it’s di...

Troubleshooting WARNING ​ : Never use a defective appliance. Always switch off the appliance and disconnect it from the outlet or remove the battery before you start to troubleshoot. Fault Possible Cause(s) Solution The vacuum will not turn on. The battery is not charged. Make sure the battery is fu...

Product Warranty Registration Please follow the link below to register your Prolux product: https://proluxcleaners.com/pages/warranty For more information on this product, including warranty info and to contact Prolux Customer Service, follow the link below: https://proluxcleaners.com/collections/ba...