Precor 303135-111 - Manuals

6 Operating and Maintaining the P80 Console Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features. Be sure to read these sections and observe all safet...

Important Safety Instructions 7  Care should be taken when mounting or dismounting the equipment.  For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace . Always stabilize yourself by holding a stationary handle bar while us...

8 Operating and Maintaining the P80 Console  SPACING— The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standards and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: – Treadmills— a minimum of 0.5 m...

Important Safety Instructions 9  Maintain the equipment to keep it in good working condition, as described in the Maintenance section of the owner’s manual. Inspect the equipment for incorrect, worn, or loose components, and then correct, replace or tighten prior to use.  If you plan to move the e...

10 Operating and Maintaining the P80 Console Hazardous Materials and Proper Disposal The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, cont...

Important Safety Instructions 11 Regulatory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio-frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between -20°C and 85°C ...

12 Operating and Maintaining the P80 Console Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) thi...

Important Safety Instructions 13 Regulatory Notices for Cardiovascular Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the ...

14 Operating and Maintaining the P80 Console Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer European Applications CE compliance is cl...

Important Safety Instructions 15 Electrical Recommendations: 120 V and 240 V Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. You should have received a power cable that meets your local electrical code requireme...

16 Operating and Maintaining the P80 Console Electrical Recommendations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System...

Table of Contents Important Safety Instructions .................................................... 5 Safety Precautions ................................................................................ 6 Hazardous Materials and Proper Disposal .................................. 10 Product Recycling...

18 Operating and Maintaining the P80 Console Beginning Your Workout .......................................................... 55 Starting a QuickStart ™ Workout ....................................................55 Starting a Featured Workout ..........................................................

Chapter 1 Getting Started The P80 console offers administrators and users the ability to set default settings that meet their specific needs. To accomplish this, the console supports settings for different classes of users depending on their administrative rights.  A guest user exercises on a piece...

20 Operating and Maintaining the P80 Console Identifying Parts of the Console The following figure provides information about the console keys. The number and actions of the console keys may differ slightly depending on the type of equipment. Figure 4: P80 console keys Table 1. Key descriptions for ...

Getting Started 21 Using the Treadmill Safety Clip The treadmill is equipped with two different stop functions, which behave as follows: If the user … Then the treadmill belt … And the console … Pulls on the lanyard attached to the safety clip and trips the restart switch. Slows to a stop. Shows the...

22 Operating and Maintaining the P80 Console The restart switch is located just below the console and immediately behind the red STOP button, as shown in the following figure. When it is tripped, the bar pops up, displaying the words PUSH TO RESET on its front side. The treadmill does not operate wh...

Getting Started 23 Instruct users on how important it is to use the safety clip while exercising on the treadmill, and demonstrate how they should attach it to their clothing near the waistline. If the restart switch trips during exercise, perform the following steps: 1. Reattach the safety clip if ...

24 Operating and Maintaining the P80 Console Treadmill Auto Stop™ (Automatic Stop) Function Important: The default setting for this feature is ON. An administrator can turn off this feature in the System Settings; however, Precor recommends it remain ON. The Auto Stop™ (Automatic Stop) feature is de...

Chapter 2 Configuring the System Settings Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment. Important: A...

26 Operating and Maintaining the P80 Console To view the System menu: 1. On the Welcome screen, press and hold Pause . Figure 7: Pause key 2. While holding Pause , press each of the following keys once in the order presented. Referring to the diagram below, press: 1 2 3 4 Channel Up Volume Down Volu...

Configuring the System Settings 27 About System information settings provide basic information including equipment models and serial numbers. Most of these settings are for informational purposes only and cannot be modified. To view the System Info settings menu: 1. Use the administrator code and pa...

28 Operating and Maintaining the P80 Console Setting Access Detail Mfe MAC Address Only Precor service technicians can modify this setting. Stored in the console’s memory. Network Time Server 1 Only Precor service technicians should modify this setting. Network Time Server 2 Only Precor service tech...

Configuring the System Settings 29 Equipment Usage The Equipment Usage settings provide information on individual usage as well as cumulative equipment usage. This information and these settings are accessible only to administrators and registered service technicians. To view the Usage settings: 1. ...

30 Operating and Maintaining the P80 Console System Settings Use the System Settings to test your equipment and set parameters that benefit your users and your facility. The System Settings menu is visible only to administrators and registered service technicians. The System Settings menu contains t...

Configuring the System Settings 31 Connectivity Configuring your audio, video, and network infrastructure requires expertise. Precor strongly recommends that you work with a qualified contractor to set up this infrastructure. To view connectivity information: 1. Use the administrator code and passwo...

32 Operating and Maintaining the P80 Console Display Use the Display settings to personalize language and time zone settings for your facility. To view and change the Display settings: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings , then Display ...

Configuring the System Settings 33 TV Settings TV Settings help you set up television channels for your users. The TV Settings are:  Channel Guide  Region  Default Channel  Volume Correction  Skip Unnamed Channels  Extensive Scan  Closed Captioning  Export/Import Channel Names To view TV Set...

Configuring the System Settings 35 Table 6. TV Settings Settings Detail Default Channel Guide Use to scan basic channels Region Select the appropriate region for your location. United States Default Channel Set a default channel for the equipment. This is the channel that will display when the TV is...

36 Operating and Maintaining the P80 Console Editing the Export/Import Channel File Note: You will need to scan for channels before you can export the file. If you have not scanned for channels, refer to Channel Configurations in the preceding section. Exporting the channel list from the fitness equ...

Configuring the System Settings 37 To edit the file and reload it: Note: You will need a utility called the Precor Channel Editor to open and modify the channel-guide.json file. To obtain a copy of the Precor Channel Editor, along with its user guide and sample files, contact Precor Customer Support...

38 Operating and Maintaining the P80 Console Workout Limits The Workout Limit settings give you control over how the equipment is used. Use these settings to create reasonable limitations for equipment usage including speed, incline, resistance, and duration. In general, fitness equipment use is bas...

Configuring the System Settings 39 To modify the Workout Limits settings: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Settings , then Workout Limits . Table 7. Workout Limits settings Setting Name Setting Options Default Value Maximum Workout Duration U...

Chapter 3 Introducing Users to the P80 Console The P80 console offers clear visuals and a touch-screen layout that encourages program exploration. Multiple preset workouts are designed to help individual users meet their fitness goals, and the console keys and durable motion controls are responsive ...

42 Operating and Maintaining the P80 Console Changing the Default Language The Welcome screen displays in a default language selected for your region. To change the default language before beginning your workout: 1. On the Welcome screen, touch the language icon. Figure 9: Language icon 2. On the La...

Introducing Users to the P80 Console 43 Using the Touch Heart Rate Feature Note: Touch heart rate performance may vary based on your physiology, fitness level, age, and other factors. You may experience an erratic readout if your hands are dry, dirty, or oily, or if the skin on your palms is especia...

44 Operating and Maintaining the P80 Console Figure 10: Heart rate target zones CAUTION: Your heart rate should never exceed 85% of your maximum aerobic heart rate. Your maximum heart rate is equal to 220 minus your age.

Introducing Users to the P80 Console 45 Using a Chest Strap Transmitter WARNING Signals used by the chest strap transmitter (or heart rate strap) may interfere with pacemakers or other implanted devices. Consult your physician and the manufacturers of your chest strap transmitter and implanted devic...

46 Operating and Maintaining the P80 Console Using Different Screen Views Important: Some Preva features are available only at facilities that subscribe to Preva. Contact Precor to update your subscription if needed. During your workout, you can switch between different types of information and ente...

Introducing Users to the P80 Console 47 Changing the Media View While you are watching either a TV channel or a video clip, you can always switch to Preva Net to read a web article.The Media View button at the bottom of the screen helps you move back and forth between these two views, while the Sele...

48 Operating and Maintaining the P80 Console Using the Workout Progress Panel Use the Workout Progress panel to customize your workout. This is the first panel that displays once you select a workout or touch GO . If you are on the Media panel, there are two ways to return to the Workout Progress pa...

Introducing Users to the P80 Console 49 Using the Media Panel The Now Playing Media panel displays available media sources. Select a media source such as TV, iPod, or on-demand web video, and then use the browsing feature to listen to that media while you browse Preva Net. To choose a media source: ...

50 Operating and Maintaining the P80 Console Connecting and Using Your iPod® You can listen to your favorite music and control your iPod directly from the console. To connect your iPod: 1. Insert the iPod into the connector at the top of the console and place your iPod securely in the pocket provide...

Introducing Users to the P80 Console 51 Watching On-Demand Web Videos While you work out, you can browse through a variety of fitness, music, and entertainment videos selected for you by the fitness facility and Precor. To watch on-demand web videos during your workout: 1. Touch the Media icon at th...

52 Operating and Maintaining the P80 Console 4. Touch the tile for the playlist you want to watch. 5. To adjust your position within the playlist while you are watching, touch the screen and use the playback controls. If you want to … Then touch … Pause video playback Resume video playback Skip ahea...

Introducing Users to the P80 Console 53 Using the Preva Net Panel WARNING For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing fe...

54 Operating and Maintaining the P80 Console Table 10. Preva Net panel Button Action Featured Displays feeds of specific interest during a workout. Preva Feeds Displays feeds selected by the management of your facility. Note: The facility administrator can rename the Preva Feeds button. All Displays...

Chapter 4 Beginning Your Workout CAUTION: If you are using a treadmill, be sure to attach the security clip to your clothing before starting your workout. The P80 console offers many different workout options. The following sections explain the type of workouts available and how to get started using...

56 Operating and Maintaining the P80 Console Starting a Featured Workout The Featured Workout appears in a panel on the Welcome Screen. Use Featured Workouts to explore the fitness benefits of preset programs and to add variety to your workout. To begin a Featured Workout, touch Go on the Featured W...

Beginning Your Workout 57 Table 11. Preset workout descriptions Goal Workout Details Lose Weight Burn calories and fat. Be Fit Condition your cardiovascular system. Get Toned Tone your gluteal region, thighs and calf muscles. Push Performance Choose a high-intensity interval program or work on dista...

58 Operating and Maintaining the P80 Console Personal Information and Progress Settings Before you begin the fitness tests or the heart rate program, you are prompted to enter personal information in the Workout Progress panel. This information may include age, weight, or a length of time for that w...

60 Operating and Maintaining the P80 Console Adjusting the Workout Intensity To adjust the equipment incline, speed, and/or resistance, use the motion controls located just below the console keys. Figure 16: Motion controls Adjust the motion controls, upward or downward, to change the incline, speed...

Beginning Your Workout 61 Viewing Your Workout Status While Exercising The Status Bar contains status measurements and is visible across the top of the viewing screen. Information displayed in the Status Bar helps you measure how your body is responding to the exercise session. The default status me...

62 Operating and Maintaining the P80 Console Scoring Your Fitness Workout This information helps you interpret your score for the Test Your Fitness workout. The score for this test is determined by this formula: Rate of oxygen (O 2 ) consumption, in ml per minute, modified for the user’s maximum hea...

Beginning Your Workout 63 Introducing Preva® Accounts to Your Users Important: Some Preva features are available only at facilities that subscribe to Preva. Contact Precor to update your subscription if needed. Creating a Preva Account Preva is a personalized fitness experience specifically designed...

64 Operating and Maintaining the P80 Console Table 14. Account information Information Type Description Email Address Provide a working email address. Password Create a password that is a minimum of eight characters. Age Enter your age as your date of birth. Your age is used to calculate calories us...

Beginning Your Workout 65 Creating a Goal Important: Some Preva features are available only at facilities that subscribe to Preva. Contact Precor to update your subscription if needed. Use the Weekly Goal panel to create a workout goal. When you set up your goal, you commit to:  A target value (dis...

66 Operating and Maintaining the P80 Console 4. Enter the values required to meet your fitness goal, then touch Next . Table 15. Target Values Target Minimum and Maximum Values Default Distance Maximum - 50 miles / 80 km Minimum - 1 mile / 1 km 3 miles/5 kilometers Duration Maximum - 120 minutes Min...

Beginning Your Workout 67 Tracking Your Progress Toward Your Goal Use the Weekly Goal panel to update your weekly goal, track your progress, and view your lifetime totals. The Goal Compass TM is a graphic summary of your weekly progress toward your goal. Figure 18: Weekly Goal progress Table 17. Int...

68 Operating and Maintaining the P80 Console Number Setting Definition Off Track Deficit Shows how much exercise you need to do to catch up to your weekly goal. If you have not hit your workout targets in any previous workouts this week, the Off Track Deficit provides a visual indication that you ne...

70 Operating and Maintaining the P80 Console Preva Tokens Once you create a Preva account on a P80 console, you can use a Preva token to sign into that personal account. Contact Precor for more information on Preva tokens. To sign into your personal account, hold your Preva token to the token icon i...

Chapter 5 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals suggested. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, alwa...

72 Operating and Maintaining the P80 Console To clean the screen:  The manufacturer recommends diluting one part 91% isopropyl alcohol solution in one part water, or using the 91% isopropyl alcohol solution in its original strength. Be sure to follow the solvent manufacturer’s precautions and direc...

8 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Educating Users Take time to educate users about the Important Safety Instructions found in both the User Reference Manual and Product Owner’s Manual . Explain to your club or facility patrons that they should observe the following...

14 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Obtaining Updated Documentation Current Precor product documentation is available at http://www.precor.com/productmanuals . You may want to check in for updated information from time to time.

Table of Contents Important Safety Instructions .................................................... 3 Safety Precautions ................................................................................ 4 Educating Users ..................................................................................

Chapter 1 Assembling the AMT Important: The instructions in the following procedures are described from the perspective of a person standing directly in front of the equipment (that is, on the opposite side of the control console from a person using the equipment). These descriptions may not match t...

Assembling the AMT 19 Required Tools  #2 Phillips screwdriver  Rubber mallet  SAE standard socket set  Wire cutter  Two #1 Phillips screwdrivers  Torque wrench (calibrated in inch-pounds, and including ³₁₆ -inch hex wrench bit) Unpacking the AMT DANGER Do not attempt to connect electrical pow...

20 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Adding the Side Arm Supports In the next procedure you will need the following pieces of hardware:  Two side arm supports  Two inner side arm covers  Two outer side arm covers  Six #10 x 1 ¹₄ -inch self-tapping screws  Six ⁵...

Assembling the AMT 21 3. Slide one ⁵₁₆ -inch flat washer and one ⁵₁₆ -inch sleeve over one of the ⁵₁₆ -inch x 3 ¹₂ -inch hex head bolts. Figure 3: Adding the sleeve and washer 4. Insert the ⁵₁₆ -inch x 3 ¹₂ -inch hex head bolt, with the washer and sleeve, into the screw hole on the inside of t...

22 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers 6. Place the flanges of the two side arm supports against the sets of screw holes on the center support. Insert a screwdriver through the middle holes in both flanges and the center support to keep the screw holes aligned. Note: U...

Assembling the AMT 23 8. On the opposite side of the center support from the handles of the screwdrivers, insert the four ⁵₁₆ -inch x 3 ¹₂ -inch hex head bolts. Attach a ⁵₁₆ -inch nylon lock nut to each bolt. Partially tighten the fasteners, then remove the screwdrivers. Figure 6: Lower side arm ...

Assembling the AMT 25 13. Repeat the previous two steps for the left side arm. After the side arm supports are secured, move the AMT off of its shipping pallet to the location where you intend it to be used. CAUTION: Do not move the AMT off of its shipping pallet without assistance. Do not apply any...

26 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Removing Access Covers Removing the front and side access covers provides sufficient space to install the console cables. Note: If you are installing a P10 or P30 console without a Personal Video System (PVS) or other accessory ca...

Assembling the AMT 27 2. Extend a finger through the moisture seal opening and under the front edge of the top cover on one side. While pressing upward on the top cover, use the heel of your hand to tap gently below its front edge and release it. Repeat this step to release the other side of the top...

28 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers 5. Gently press in on each of the side covers, just behind the front edge and about 8 ¹₂ inches from the bottom, while pulling the front cover assembly forward to disengage it. Note: Each side cover has a small triangular mark to...

Assembling the AMT 29 Threading the Console Cables Before you begin this procedure, make sure that you have retrieved the following parts from the console package:  Ethernet (CAT 5) coupler and cable (models with P80 consoles only)  Television coupler and cable (models with P80 consoles or Persona...

30 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers 3. Insert the connectors into the jack plate at the lower front of the AMT, as shown in the following figure and table. Figure 15: Jack plate layout Table 1. AMT connector locations Position Connector Ethernet coupler (P80 console...

Assembling the AMT 31 7. Route the cables through the three clips next to the front flywheel, then through the topmost cable clip on the main frame, and finally up to the center column. Figure 16: Cable routing along the frame to the center column 8. Remove the tie from the base unit data cable, the...

32 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Replacing Access Covers For this procedure, you will need the covers you removed earlier, as well as the fasteners you removed with them. To replace the access covers: 1. Guide the arm openings in the front cover around the arms o...

Assembling the AMT 33 5. Wrap the moisture seal around the center column below the heart rate sensor grips, then fit it into the top cover. Make sure that the surfaces and edges of the moisture seal are flush with those on the top cover. Figure 18: Moisture seal positioning

34 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Positioning the Handlebars To avoid damage in shipment, the ATM is packed with its handlebars reversed. Two ³₈ -inch x 1 ¹₄ -inch set screws are loosely threaded into the screw holes on each handlebar. The plastic boots that wil...

Assembling the AMT 35 2. Rotate the handlebar exactly one half turn (180°). Note: When the handlebar is positioned correctly, it bends slightly outward. The screw holes in the handlebar should also line up with those on the AMT. Figure 20: Handlebar positioning steps 3. Reinsert the two set screws. ...

36 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers 5. Adjust the positions of both handlebars outward as much as possible. Both handlebars should be at equal angles to the body of the AMT and angled slightly outward, as shown in the following figure. Figure 21: View of handlebar p...

Assembling the AMT 37 Leveling the AMT It is important that you level and stabilize the AMT properly every time you move it. CAUTION: To eliminate movement, make sure the adjustable feet are in contact with the floor. Also, make sure that the unit sits on a flat surface. Adjusting the feet of the un...

38 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers 3. Reposition the adjustable feet as needed. If you want to … Then turn the adjustable feet … Raise the front end of the AMT Counterclockwise Lower the front end of the AMT Clockwise Figure 22: Location of adjustable feet and jam ...

Assembling the AMT 39 Breaking in the Equipment Precor equipment does not require an actual break-in period. However, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shipped. This can cause the equipment to operate with a small amount of roughne...

Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting hardware and connector locations whenever possible. The installation sequence for any of them is as follows:  Threading the cable assembly  Connecting cables  Completing the i...

42 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Threading the Cable Assembly (P80) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you line up the back plate on the consol...

Installing the Console 43 3. Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 25: Console positioning on base unit 4. Tilt the console forward u...

Installing the Console 45 Table 2. P80 internal cable connections Cable Connector Type Circuit Connector Location Ethernet (LAN) Eight-contact modular, on round black cable TV in F-type coaxial Power Two-contact plug, polarized and latched Data from base unit Eight-contact modular, on flat gray cabl...

46 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers 3. Attach the connector on the cable to the connector on the tuner cable and tighten the two connectors securely using two ⁷₁₆ -inch open-end wrenches. Position both connectors above the upper right corner of the back plate. 4. U...

Installing the Console 47 Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data cables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modular jacks in the console. Because of this, it is important to exercise cautio...

48 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Connecting the Heart Rate Sensor Cable The heart rate sensor cable passes through the cutaway opening at the upper left corner of the back plate, then down to the small circuit board at the lower left of the console. The following...

Installing the Console 49 Connecting the Power Cable Route the power cable through the cutaway opening at the upper left corner of the back plate. In the nearby opening within the steel console framework, locate the socket that matches the power cable plug and connect the power cable to it. Note: Be...

50 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Completing the Console Installation (P80) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are t...

Installing the Console 51 3. Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 31: Console positioning on base unit 4. Tilt the console forward u...

Installing the Console 53 After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors. Figure 34: Cable ...

Installing the Console 55 Completing the Console Installation (P30 and P10) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To complete the i...

56 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Verifying That the Heart Rate Display Is Operational To verify that the heart rate display is operational: 1. Begin exercising on the equipment. 2. Grasp both touch-sensitive handlebars. Note: The heart rate is read within ten sec...

Chapter 3 Maintenance To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk ...

58 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Alternatively, you can clean the equipment with Athletix fitness equipment cleaning wipes (for more information, visit www.athletixproducts.com ) CAUTION: Read and follow the manufacturer’s instructions, particularly dilution inst...

Maintenance 59 Cleaning the P80 Console and Display The console and screen require little maintenance once installed. Precor recommends that you clean the console and screen before and after each exercise session. To remove dust and dirt from the console:  Wipe all exposed surfaces with a soft clot...

60 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Weekly Maintenance Perform the following maintenance tasks every week: 1. Disconnect the external power supply. 2. Clean the floor under the equipment using a vacuum cleaner or a damp mop. 3. When the floor is completely dry, reco...

Maintenance 61 Changing the Belt (Newer Model AMT Only) The newer model AMT uses belts to provide motion. These belts eventually wear and must be replaced. When the belt stride count reaches 90 million, the message BELTS MUST BE CHANGED SOON scrolls on the Welcome screen. While this message appears,...

Chapter 4 Self-Powered Features Important: This chapter of the manual describes Precor fitness equipment that can operate without being connected to AC power. This includes units equipped with P30 or P10 consoles. However, P80 consoles must be connected to AC power through their power supplies to op...

64 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins. In this mode, the conso...

Self-Powered Features 65 Using the Optional Power Adapter After connecting the power adapter to the equipment, plug the opposite end into the appropriate power source (120 V or 240 V). CAUTION: When the optional power adapter is in use, make sure that the power supply cord does not create a safety h...

66 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Replacing the Battery The equipment’s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service . CAUTION: The batte...

Chapter 5 Commercial Cardiovascular Equipment Limited Warranty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT. BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS. Limited Warranty. Precor Inco...

68 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers Options / Accessories Many options or accessories have components that are connected internally or mounted inside the electronic console. The following guidelines determine the warranty for these components. If the internal compon...

70 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND STR...