Powermatic 1632 - Manuals

  5 blades. A machine under repair should be RED TAGGED to show it should not be used until the maintenance is complete. 14. Maintain tools in top condition. Keep all tools sharp and clean for the best and safest performance, and follow instructions for lubricating and changing accessories. Never st...

  6 5.0 Specifications Stock number ...................................................... 1791250 ..........................................................1791251 Model number ..................................................... 1632-1 ................................................................

  7 6.0 Setup and assembly Remove the sander from its crate and inspect for damage to ensure all parts are intact. Any damage should be reported to your distributor and shipping agent immediately upon discovery. Before proceeding with installation, read your instruction manual thoroughly. Familiariz...

  8 An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. 8.0 Adjustments Di...

  9 Figure 5 8.5 Feed speed adjustment The Model 1632 has two speeds that feed the workpiece at 15 feet per minute (FPM) finished surface sanding, and 32.5 FPM for faster, lighter sanding. To change the feed rate: 1. Disconnect machine from power source. 2. Remove cap screw that holds the sprocket c...

  10 11.0 Troubleshooting the 1632 Sander Symptom Possible Cause Correction Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection. Inspect all lead connections on motor for loose or open connections. Motor will not start: fuses or circuit br...

  12 12.2.1 Electrical Control and Upper Adjustment Roller – Exploded View    

  13 12.2.2 Electrical Control and Upper Adjustment Roller – Parts List Index No Part No Description Size Qty 1 ................ 6293203 .................... Upper Door (L) ......................................................... ...................................... 1 2 ................ 6293204 ....

  15 12.3.2 Sanding Drum Assembly – Parts List Index No Part No Description Size Qty 1 ................ 6293240 .................... Ring ......................................................................... ...................................... 2 2 ................ 6293241 .......................

  17 12.4.1 Base and Table Adjustment Assembly – Parts List

  20 12.5.1 Conveyor Belt and Table – Exploded View

  22 12.5.3 Conveyor Belt and Table; Reduction Motor – Parts List Index No Part No Description Size Qty 1 ................ 6293351 .................... Hex Socket Cap Screw ............................................ 1/4" x 1/4"...................... 6 2 ................ 6293352 ..............

  24 13.0 Electrical Connections – 1632 Sander 13.1 460V – 3 Phase