Polk Audio DP-1 - Manuals

Polk Audio DP-1 – Manual in PDF format online.

Manuals:

Manual

Manual Polk Audio DP-1

Summary

Page 2 - INTRODUCTION; IMPORTANT SAFETY INSTRUCTIONS

2 1. Read the Owner’s Manual After unpacking this product, read the owner’s manual care-fully, and follow all the operating and other instructions. 2. Power Sources This product should be operated only from the type of powersource indicated on the marking label. If you are not sure ofthe type of pow...

Page 3 - PRECAUTIONS; WARNING

www.polkaudio.com 3 Handling Your CD/DVD Player • When shipping the DVD player, always use the original shipping carton and packing materials. For maximum protection, repack theunit as it was originally packed at the factory. • Do not use volatile liquids, such as insect spray, near the DVD player. ...

Page 4 - Table of Contents; A Word from Matthew Polk; Dear Home Entertainment Buff,; About Polk Audio—A History of Excellence

Table of Contents Safety Warnings ......................................................................2-3 Carton Contents ........................................................................5 Basic Setup ................................................................................5 Remote C...

Page 5 - Carton Contents; and remote control extension interconnects; General Precautions; to unplug all of the equipment in the system from the wall outlet.; Component Video Output Connections; GETTING STARTED

Polk Customer Service (800) 377-7655 5 Carton Contents The following items should be in the box with the DP-1 DVD player. If any of these items are missing, contact your Polk Audio retailer or Polk AudioCustomer Service.• DR-3 Unified Learning remote control• DR-4 DVD-specific remote control• 4 each...

Page 6 - Notes on Batteries; REMOTE CONTROLS

www.polkaudio.com 6 There are two remotes included with the DP-1 CD/DVD player. Thelarge, black DR-3 is a unified system programmable/learning remotecontrol that has been pre-programmed to operate the most-often usedfunctions of both the Digital Solution preamp/processor and the DP-1CD/DVD player. Y...

Page 7 - DR-3 REMOTE GUIDED TOUR

Polk Customer Service (800) 377-7655 7 We will only describe here the DR-3 remote functions as they pertain to thePolk Audio Digital Solution preamp/processor and DP-1 CD/DVD player. Seethe separate DR-3 Owner’s Manual for instructions on how to program anduse this remote for other devices. 1. These...

Page 10 - How to navigate and select choices; SELECT; Figure 1

10 Your DP-1 player has been preset to work perfectly with your PolkAudio Digital Solution system and a standard 4:3 aspect ratio TV. If youhave a 16:9 widescreen TV you will have to reset the TV Aspect Ratio inthe “Other” section of the DVD setup menu. No matter what gear youhave it is always a goo...

Page 11 - Setting Digital Audio Output Sample Frequency; Setting DRC; Figure 3

11 Setting Digital Audio Output Sample Frequency The default setting of “48kHz” allows the DP-1 to work safely with alldigital processors and receivers. When this DVD player is connected tothe Polk Audio Digital Solution 7200 system (but NOT the RMDS-1system), we recommend that you use the “96kHz” s...

Page 12 - Figure 7

12 Parental Block/Password Menus (optional) The Rating and Password menus are useful if you have children at home and want to prevent them from viewing inappropriate DVDs. Most DVD movies are age rated just like theatrical releases. The ratingnumbers on this menu roughly correspond to USA movie indu...

Page 13 - Playing a DVD; If you press STOP a second time the DVD will stop and will; DVD OPERATION

13 Playing a DVD 1. Turning On the System. Press SYSTEM POWER on the bottom of the DR-3 remote to turn on the Digital Solution system. Press the DVD Source/Device button at the top of the remote and then press the SOURCE POWER button back at the bottom. The CD/DVD player will turn on and the power i...

Page 14 - ADVANCED DVD OPERATION

14 1. Changing the Surround Audio Mode. If the DVD has a 5.1 surround track but the DS preamp/processor does not indicate “3/2.1” in thedisplay, use the AUDIO button to toggle through the available audio tracks on the DVD. Soundtracks on menus and extras are usually not5.1, so wait until the movie i...

Page 15 - Figure 9

15 The following seldom-used advanced features can only beaccessed with the DR-4 remote control included with the DP-1. 1. Using Markers and Search. Markers allow you to go quickly back to a specific scene. Press the MARKER key at the beginning of a scene you want to return to. The on-screen display...

Page 16 - CD OPERATION

16 Playing a CD 1. Turning On the System. Press SYSTEM POWER on the DR-3 remote to turn on the Digital Solution system. Press the DVD Source/Device button and then press the SOURCE POWER button (bottom, top, bottom). The CD/DVD player will turn on and thepower indicator light will turn green. After ...

Page 17 - Advanced CD Operation

17 Advanced CD Operation The following seldom-used advanced features can only be accessedwith the DR-4 CD/DVD player-specific remote control. Turn on yourTV so you can see the indicators and menus for these functions. 1. Repeat. Press the REPEAT button to repeat a specific track or the entire CD ( f...

Page 18 - Playing an MP3 CD

18 Playing an MP3 CD 1. Turning On the System. Press SYSTEM POWER on the DR-3 remote to turn on the Digital Solution system. Press the DVD Source/Device button and then press the SOURCE POWER button. The CD/DVD player will turn on and the power indicator light willturn green. After a few seconds del...

Page 19 - Advanced MP3 Operation

19 Advanced MP3 Operation The following seldom-used advanced features can only be accessedwith the DR-4 CD/DVD player-specific remote control. Turn on yourTV so you can see the indicators and menus for these functions. 13. Markers and Search. Markers allow you to go quickly back to a specific part o...

Page 20 - It’s Probable Cause...; Troubleshooting Guide

20 If This Happens: The DVD player dosen’t turn on. The power is on but the DVD player doesn’t work. The images on my TV look tall and thin and stretched out when I play a DVD. When I play a widescreen DVD on mywidescreen TV, I get a 4:3 (standard) shape picture. I don’t see any Graphic User Interfa...

Page 21 - The disc is not inserted properly

21 If This Happens: The power is on but the machine will notplay a MP3 disc. It’s Probable Cause… The disc is not inserted properly The disc is not an ISO9660 disc The disc does not have an MP3 file in the first track. Cures: Open the disc tray and make sure the CD isinserted correctly in the tray a...

Page 22 - DVD Player; NTSC; Outputs; Polk Audio, Inc., warrants to the original purchaser only that the; POLK AUDIO LIMITED WARRANTY

22 DVD Player Power Supply AC 120V, 60 Hz Power Consumption 16 W Weight 7.1 lbs. (3.2 kg) External Dimensions (W x H x D) 17.3” x 3.5” x 10” (440 x 88 x 254 mm) Signal System NTSC Laser Semiconductor laser, wavelength 650 m (DVD), 780 mm (CD) Frequency Range (audio) DVD: fs = 96 kHz 4 Hz - 44 kHz fs...

Page 25 - UNIFIED LEARNING

INSTRUCTION MANUAL UNIFIED LEARNING REMOTE CONTROL DR-3

Page 31 - Manual Three-Digit Code Method; The equipment will turn off when you enter; PROGRAMMING THE REMOTE

www.polkaudio.com 7 Manual Three-Digit Code Method The DR-3 remote control can duplicate the remote functions of mostbrands of audio/video equipment by simply entering in a three-digitcode number. When you enter in the code the DR-3 “learns” most or allof the remote functions of that equipment so yo...

Page 33 - Teaching Method

www.polkaudio.com 9 Teaching Method From time to time the three-digit programming method doesn’t automatically program in all of the commands of the original remote. In such cases you can “teach” the DR-3 individual commands from your original equipment remote control. New commands can be taughtto a...

Page 34 - Erasing a Learned Command From a Button

Polk Customer Service (800) 377-7655 10 Erasing a Learned Command From a Button NOTE: You have 20 seconds to perform each step. If the source buttonlight goes off, you need to back up a step and do it again. You can exitby pressing the CNCL (cancel) button at any time in the process. 1. Press and ho...

Page 35 - Restoring Factory Programming; LIGHT

www.polkaudio.com 11 Erasing All the Learned Commands in All Device Modes This procedure will erase all the learned commands on all the buttons in all eight Source/Device modes. Be really, really sure you want to dothis before following the steps below. 1. Press and hold the LEARN button for two sec...

Page 36 - MACRO OPERATION

Polk Customer Service (800) 377-7655 12 Programming the Macro Button The MACRO button can send out a sequence of up to 20 commandswith one button press. It can be programmed for up to eight Sourcebutton macros and perform multi-step operations with just one buttonpush. For example, you can program t...

Page 38 - SETUP CODES

Polk customer service (800) 377-7655 14 Manufacturer/Brand Set-Up Code Number Tape/Aux PHILIPS TIVO 001 SONY TIVO 002 DVD Player GOLDSTAR 057 074 091 HARMAN KARDON 084 HITACHI 101 JVC 012 LG 057 074 091 MAGNAVOX 066 096 MARANTZ 083 095 MITSUBISHI 017 MYRYAD 102 NAD 088 NAKAMICHI 103 ONKYO 035 076 PA...

Page 40 - The Setup Code list in the DR-3 owner's manual is incomplete.

Polk customer service (800) 377-7655 Manufacturer/Brand Set-Up Code Tape/Aux PHILIPS TIVO 001 SONY TIVO 002 DVD Player ALPINE 098 APEX DIGITAL 087 111 DENON 007 080 GE 026 027 GOLDSTAR 057 074 091 HARMAN KARDON 084 HITACHI 101 JVC 012 LG 057 074 091 MAGNAVOX 066 096 MARANTZ 083 095 MITSUBISHI 017 MY...

Page 41 - CD

www.polkaudio.com SETUP CODES Manufacturer/Brand Set-Up Code Cable (TV) TERA 172 TMK 004 TOSHIBA 015 030 040 062 101 TOTEVISION 143 UNIVERSAL 008 VIDEO CONCEPTS 146 VIDIKRON 174 VIDTECH 004 VORK 004 WARDS 004 008 009 019 028060 061 063 064 072074 164 WESTING HOUSE 076 YAMAHA 001 004 YUPITERU 043 ZEN...