Polaris X2- Manuals

5 VEHICLE IDENTIFICATION NUMBERS Record your ATV’s identification numbers and key number in the spaces provided. Remove the spare key and store it in a safe place. Your key can be duplicated only by mating a Polaris key blank with one of your existing keys, so if both keys are lost, the ignition swi...

6 SAFETY Safety Decals and Locations Warning decals have been placed on the ATV for your protection. Read and follow the instructions of the decals on the ATV carefully. If any of the decals depicted in this manual differ from the decals on your ATV, always read and follow the instructions of the de...

ALWAYS USE AN APPROVED HELMET AND PROTECTIVE GEAR FOR OPERATOR AND PASSENGER NEVER USE ON PUBLIC ROADS NEVER CARRY MORE THAN ONE PASSENGER NEVER USE WITH DRUGS OR ALCOHOL B 7 SAFETY Safety Decals and Locations WARNING Improper vehicle use can result in SEVERE INJURY or DEATH. NEVER operate: S withou...

8 SAFETY Safety Decals and Locations WARNING IMPROPER TIRE PRESSURE OR OVERLOADING can cause loss of control resulting in SEVERE INJURY OR DEATH. TIRE PRESSURE IN PSI (KPa): FRONT 5 (34.5) REAR 5 (34.5) MAXIMUM WEIGHT CAPACITY (Gross Vehicle Weight) INCLUDING MACHINE, OPERATOR, PASSENGER AND CARGO I...

NEVER CARRY A PASSENGER UNDER AGE 12 NEVER CARRY MORE THAN ONE PASSENGER NEVER RIDE AFTER USING DRUGS OR ALCOHOL H PASSENGER UNDER 12 10 SAFETY Safety Decals and Locations WARNING PASSENGER SAFETY To reduce the risk of SEVERE INJURY or DEATH. NEVER carry a passenger too small to firmly plant feet on...

I 11 SAFETY Safety Decals and Locations WARNING S Moving parts hazard under belt-clutch guard. To prevent serious injury, do not operate vehicle with guard removed. S Do not modify engine or clutch. Doing so can cause part failure, possible imbalance, and excessive engine RPM, which can result in se...

12 SAFETY Safety Training ATV safety training is a top priority for Polaris. When you purchased your new ATV, your dealer instructed you on the authorized ATV RiderCourse sm available to you and your eligible family members. This training is included in the purchase price of your ATV. Polaris strong...

13 SAFETY Safe Riding Gear Always wear clothing suited to the type of riding. ATV riding requires special protective clothing for comfort and to reduce the chance of injury. 1. Helmet Your helmet is the most important piece of protective gear for safe riding. A helmet can prevent a severe head injur...

14 SAFETY Rider Safety WARNING Failure to follow the warnings contained in this manual can result in serious injury or death.A Polaris ATV is not a toy and can be hazardous to operate. This vehicle handles differently than other vehicles, such as motorcycles and cars. A collision or rollover can occ...

15 SAFETY Rider Safety WARNING Serious injury or death can result if you do not follow these instructions and procedures, which are outlined in further detail within your owner’s manual. S Read this manual and all labels carefully, and follow the operating procedures described. S Never operate an AT...

17 SAFETY Rider Safety S Always use proper procedures if you stall or roll backwards while climbing a hill. To avoid stalling, maintain a steady speed when climbing a hill. If you stall or roll backwards, follow the special procedure for braking described in this manual. Always dismount on the uphil...

18 SAFETY Rider Safety Equipment Modifications We are concerned for the safety of our customers and for the general public. Therefore, we strongly recommend that consumers do not install on a Polaris ATV any equipment that may increase the speed or power of the vehicle, or make any other modificatio...

36 CONTROLS Engine Electrical Switches WARNING Activating the override switch while the throttle is open can cause loss of control, resulting in severe injury or death. Do not activate the override switch while the throttle is open. Mode/Reverse Override Switch (1) - This vehicle is equipped with a ...

1 37 CONTROLS WARNING Operating an ATV with sticking or improperly operating throttle controls could cause an accident and lead to severe injury or death.Never start or operate an ATV with a sticking or improperly operating throttle. Always contact your dealer for service if throttle problems arise....

38 CONTROLS Light Switches The light switch is located on the left handlebar. It’s used to turn the lights on and off and to switch the lights from HI to LO. NOTE: The lights won’t work unless the key is in the ON position and the shut-off switch is in the RUN position. WARNING Operating the ATV on ...

39 CONTROLS Master Cylinder The brake fluid in the master cylinder (1), which is located on the left handlebar, should be checked before each ride. The fluid level can be seen through an indicator window (2) on the top of the master cylinder. This eye will appear dark when the fluid level is full. W...

40 CONTROLS Parking Brake WARNING Operating the ATV while the parking brake is engaged could result in an accident and serious injury or death. Always check to be sure the parking brake is disengaged before operating. Setting the Parking Brake 1. Place the transmission in PARK.2. Squeeze and release...

41 CONTROLS Auxiliary Brake WARNING Aggressively applying the auxiliary brake when backing down a hill may cause rear tipover, which could result in serious injury or death.Use caution when applying the auxiliary brake. Do not aggressively apply the auxiliary brake when going forward. The rear wheel...

H N P L R 1 42 CONTROLS Automatic Transmission Gear Selector The transmission gear selector (1) is located on the right side of the vehicle.H: High Gear L: Low Gear N: Neutral R: Reverse P: Park CAUTION Shifting gears with the engine speed above idle or while the vehicle is moving could cause transm...

43 FEATURES All Wheel Drive (AWD) System The AWD system is activated by a switch (1) on the right handlebar.When the switch is on 2X4 (center position), the ATV is in two wheel drive at all times and the differential is locked.When the switch is on AWD (left position), the ATV is in AWD and the diff...

44 FEATURES All Wheel Drive (AWD) System Engaging Front Gearcase The AWD switch may be turned on or off while the vehicle is moving. Initially, the vehicle’s electronic system will not enable the AWD until the engine RPM is below 3100. Once enabled, the AWD remains enabled until the AWD switch is tu...

46 FEATURES Instrument Cluster Your ATV is equipped with an instrument cluster that senses vehicle speed from the right front wheel. The instrument cluster measures distance in miles or kilometers as well as hours of operation. It also includes a reverse speed limiter function that limits the ATV’s ...

47 FEATURES Instrument Cluster Rider Information Center The rider information center is located in the instrument cluster. All segments will light up for 2.5 seconds at start-up. NOTE: If the instrument cluster fails to illuminate, a battery over-voltage may have occurred and the instrument cluster ...

48 FEATURES Instrument Cluster Rider Information Center The rider information center has 4 standard modes:Mode 1 - OdometerMode 2 - TripmeterMode 3 - Total Service HoursMode 4 - TachometerThe reverse override button on the left handlebar is also the mode button . NOTE: If using the mode button to pr...

49 FEATURES Instrument Cluster Rider Information Center Diagnostic Mode The diagnostic mode is for informational purposes only. Please return your ATV to your dealer for all major repairs.As long as the gauge is in the diagnostic mode, the wrench icon will remain lit.To leave the diagnostic mode, tu...

51 FEATURES Instrument Cluster Rider Information Center Special EFI Diagnostic Mode The EFI diagnostic mode is for informational purposes only. Please see your Polaris dealer for all major repairs. To download blink codes (failure codes) from the EFI module:1. Place the transmission in PARK. Turn th...

52 OPERATION Fuel Safety WARNING Gasoline is highly flammable and explosive under certain conditions. S Always exercise extreme caution whenever handling gasoline. S Always refuel with the engine stopped, and outdoors or in a well ventilated area. S Never fill a gas container while it’s in the cargo...

53 OPERATION Break-In Period The break-in period for your new Polaris ATV is the first ten hours of operation, or the time it takes to use the first two full tanks of gasoline. No single action on your part is as important as following the procedures for a proper break-in. Careful treatment of a new...

55 OPERATION Starting the Engine WARNING Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness resulting in severe injury or death. Never run an engine in an enclosed area. 1. Position the vehicle on a level surface.2. Place the transmission in PARK. 3. Lock the parki...

56 OPERATION Driving Procedures 1. Wear appropriate riding gear. See page 13. 2. Perform the pre-ride inspection. See page 54. 3. Place the transmission in PARK. 4. Lock the parking brake.5. Mount the vehicle from the left side. 6. Sit upright with both feet on the footrests and both hands on the ha...

57 OPERATION Making Turns Both rear wheels drive equally at all times, except when operating in TURF mode. This means that the outside wheel must travel a greater distance than the inside wheel when turning, and the inside tire must slip traction slightly.1. Slow down.2. Never turn quickly when carr...

58 OPERATION Driving with a Passenger 1. Make sure the passenger is at least 12 years of age and is tall enough to comfortably reach the footrests and grab handles. 2. Make sure the passenger is wearing appropriate riding gear, including an approved helmet with a rigid chin guard. See page 13. 3. Pe...

59 OPERATION Driving with a Passenger 10. Ride to the ability of your passenger, instead of to your own ability. Avoid unexpected or aggressive maneuvers that could cause a passenger to fall from the vehicle. 11. Do not cross a hillside with a passenger on board. See page 62.12. A passenger should a...

60 OPERATION Driving on Slippery Surfaces Whenever riding on slippery surfaces such as wet trails or loose gravel, or during freezing weather, follow these precautions:1. Slow down when entering slippery areas. 2. Engage AWD before wheels begin to lose traction. 3. Maintain a high level of alertness...

61 OPERATION Driving Uphill Whenever traveling uphill, follow these precautions:1. Always travel straight uphill.2. Avoid steep hills (15 _ maximum). 3. Keep both feet on the footrests.4. Shift body weight uphill.5. Proceed at a steady rate of speed and throttle opening.6. Remain alert and be prepar...

62 OPERATION Driving on a Hillside WARNING Improperly crossing hills or turning on hills can result in loss of control or vehicle overturn, resulting in severe injury or death. Avoid crossing the side of a hill when possible. Do not cross a hillside with a passenger on board. Follow proper procedure...

63 OPERATION Driving Downhill Whenever descending a hill, follow these precautions:1. Always descend a hill with the transmission in forward gear. Do not descend a hill with the transmission in neutral. 2. Slow down.3. Proceed directly downhill.4. Shift body weight uphill.5. Apply the brakes slightl...

8’ (2.4 m) 64 OPERATION Turning Around on a Hill If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-turn to turn around.

65 OPERATION Turning Around on a Hill 1. Stop the vehicle and lock the parking brake while keeping body weight uphill. 2. Leave the transmission in forward and shut off the engine.3. Dismount on the uphill side of the vehicle, or on the left if the vehicle is pointing straight uphill. NOTE: If a pas...

66 OPERATION Driving Through Water Your ATV can operate through water with a maximum recommended depth equal to the bottom of the footrests (1). Follow these procedures when operating through water: 1. Determine water depths and current before crossing. 2. Choose a crossing where both banks have gra...

67 OPERATION Driving Through Water CAUTION Major engine damage can result if the vehicle is not thoroughly inspected after operation in water. Perform the services outlined in the maintenance chart.If your vehicle becomes immersed or is operated in water that exceeds the footrest level, take it to y...

68 OPERATION Driving in Reverse Follow these precautions when operating in reverse:1. Always avoid backing downhill. 2. Always check for obstacles or people behind the ATV before operating in reverse. Be aware that a passenger can obstruct your view. 3. When it’s safe to proceed in reverse, move slo...

69 OPERATION Driving Over Obstacles 1. Be alert! Look ahead and learn to read the terrain you’re traveling on. Be constantly alert for hazards such as logs, rocks and low hanging branches. 2. Avoid operating over large obstacles such as rocks and fallen trees when possible. If unavoidable, use extre...

70 OPERATION Hauling Cargo WARNING Overloading the vehicle or carrying or towing cargo improperly can alter vehicle handling and may cause loss of control or brake instability. Always follow these precautions when hauling cargo: S Never exceed the stated load capacity for this vehicle. S Never carry...

71 OPERATION Hauling Cargo Load Distribution Your ATV has been designed to carry or tow a certain amount of load. Always read and understand the load distribution warnings listed on the warning labels, and never exceed the specified weights.Cargo weight should be mounted as low as possible. When ope...

72 OPERATION Hauling Cargo Dumping Cargo 1. Select a level site to dump the cargo box. Do not attempt to dump or unload the vehicle while parked on an incline. 2. Place the transmission in PARK.3. Lock the parking brake.4. Dismount the vehicle.5. Lower the tailgate. WARNING If cargo weight is placed...

73 EMISSION CONTROL SYSTEMS Noise Emission Control System Do not modify the engine, intake or exhaust components, as doing so may affect compliance with U.S.A. EPA noise control requirements (40 CFR 205) and local noise level requirements. Operation on Public Lands in the U.S.A. Your Polaris vehicle...

74 MAINTENANCE Periodic Maintenance Chart Careful periodic maintenance will help keep your vehicle in the safest, most reliable condition. Inspection, adjustment and lubrication of important components are explained in the periodic maintenance chart.Inspect, clean, lubricate, adjust and replace part...

75 MAINTENANCE Periodic Maintenance Chart Maintenance Chart Key " Perform these procedures more frequently for vehicles subjected to severe use. E Emission-related service (Failure to conduct this maintenance will not void the emissions warranty but may affect emissions.) J Have an authorized Po...

79 MAINTENANCE Lubrication Guide Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart beginning on page 74. Items not listed in the chart should be lubricated at the General Lubrication interval. Lubrication Guide Key " More often under severe use L Pola...

80 MAINTENANCE Premium 4 Synthetic Lubricant Polaris Premium 4 All Season synthetic engine oil has been specially formulated for use in Polaris 4-cycle engines. It’s a fully synthetic, high performance, multi-viscosity oil designed to provide the ultimate in lubrication performance and protection. N...

1 ADD 8 OZ. NORMAL FULL 2 81 MAINTENANCE Oil Level The oil dipstick and fill tube (1) are located on the left side of the ATV. NOTE: A rising oil level between checks in cool weather driving can indicate contaminants such as gas or moisture collecting in the crankcase. If the oil level is over the f...

82 MAINTENANCE Oil and Filter Change Change the oil and filter at the intervals outlined in the Periodic Maintenance Chart beginning on page 74.1. Position the vehicle on a level surface.2. Clean the area around the drain plug at the bottom of the oil tank and the bottom of the engine. 3. Run the en...

83 MAINTENANCE Oil Change 10. Place shop towels beneath the oil filter. Using an oil filter wrench, turn the filter (1) counterclockwise and remove. 11. Lubricate the gasket on the new filter with a film of new engine oil. Check to make sure the gasket is in good condition. Also make sure the gasket...

84 MAINTENANCE Oil Change Oil Pump Priming This priming procedure must be performed whenever the oil hose connection between the oil tank and pump inlet has been disconnected.1. Clamp or pinch off the vent line (1) approximately 2 I from the oil tank (2), between the end of the oil tank vent fitting...

85 MAINTENANCE Transmission Oil Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 74. We recommend the use of Polaris Premium AGL Synthetic Gearcase Lubricant. See page 117 for the part numbers of Polaris products. Oil Check Th...

86 MAINTENANCE Transmission Oil Oil Change The transmission drain plug (2) is located on the right side of the gearcase, on the right side of the ATV, behind the wheel well. 1. Remove the fill plug. Remove the drain plug. 2. Drain the oil into a drain pan. Dispose of used oil properly. 3. Clean and ...

87 MAINTENANCE Front Gearcase Oil Always check and change the front gearcase oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 66. Maintain the oil level even with the bottom of the fill hole threads (1). We recommend the use of Polaris Premium Demand Drive Hub Fluid....

88 MAINTENANCE Engine Cooling System Radiator Coolant Level To ensure that the coolant maintains its ability to protect the engine, we recommend that the system be completely drained every two years and a fresh mixture of antifreeze and water added. Polaris recommends the use of Polaris Premium 60/4...

89 MAINTENANCE Engine Cooling System Coolant Level The recovery bottle (1) is located on the left side of the machine. To access the recovery bottle, remove the left side panel as outlined on page 93.Maintain the coolant level between the minimum and maximum marks on the bottle (when the fluid is co...

90 MAINTENANCE Brakes The front and rear brakes are hydraulic disc brakes, activated by moving the single brake lever toward the handlebar. These brakes are self-adjusting.The following checks are recommended to keep the brake system in good operating condition. Check more often if brakes are used h...

91 MAINTENANCE Brakes 2. Check the brake system for fluid leaks.3. Check the brakes for excessive travel or spongy feel. 4. Check the friction pads for wear, damage and looseness. 5. Check the security and surface condition of the disc. NOTE: Pads should be changed when worn to 3/64 ″ (.1 cm). Auxil...

92 MAINTENANCE Steering Assembly The steering assembly of the ATV should be checked periodically for loose nuts and bolts. If loose nuts and bolts are found, see your Polaris dealer for service before operating the vehicle. Toe Alignment WARNING Severe injury or death can result from improper toe al...

93 MAINTENANCE Side Panel Removal 1. Remove the seat.2. Grasp the rear of the side panel near the rear cab. With a firm motion, pull the panel outward to disengage the side panel from the grommet. 3. Pull the panel downward and rearward to remove it from the ATV.4. Reinstall the side panel by revers...

94 MAINTENANCE WARNING Operating your ATV with worn tires, improperly inflated tires, non-standard tires or improperly installed tires will affect vehicle handling and could cause an accident resulting in serious injury or death.Maintain proper tire pressure as described on the decal on your ATV and...

95 MAINTENANCE Wheel Installation WARNING Improperly installed wheels can adversely affect tire wear and vehicle handling, which can result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not service axle nuts that have a cotter pin installed. See your Polari...

96 MAINTENANCE Filter Systems Air Filter Service 1. Remove the seat, release the air box cover clips, and remove the air box cover. 2. Loosen the clamp and remove the filter. 3. Remove the fabric type pre-filter (1) from the main filter (2). Wash the pre-filter in soapy water, then rinse and let dry...

97 MAINTENANCE Lights When servicing a halogen lamp, don’t touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. WARNING Poor lighting while driving can result in severe injury or death. Headlight and taillight lenses become...

98 MAINTENANCE Lights High Beam Adjustment The headlight beam can be adjusted slightly upward or downward. Use the following procedure to make the adjustment.1. Position the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a wall. 2. Measure the distance from the floor...

99 MAINTENANCE Lights Headlight Housing Replacement 1. Remove the two screws on the lower front corners of the headlight pod. 2. Lift the pod slightly while depressing the tabs at the rear of the pod. 3. Lift the pod cover and disconnect the speedometer harnesses from the speedometer. 4. Unplug the ...

1 2 1 100 MAINTENANCE Lights Lower Headlamp Removal / Installation 1. Turn the back of the headlight harness (1) counterclockwise and pull the harness assembly away from the headlight assembly. 2. Remove the headlamp and install the new headlamp. 3. Reinstall the harness assembly into the headlight ...

101 MAINTENANCE Spark Plugs Always use the spark plugs recommended for your ATV. Refer to the specifications section beginning on page 122 for the recommended spark plug type and gap. CAUTION Using non-recommended spark plugs can result in serious engine damage. Always use Polaris-recommended spark ...

102 MAINTENANCE Vehicle Immersion CAUTION If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle to your dealer before starting the engine. If it’s impossible to take your ATV to a dealer before starting it, follow the steps outl...

103 MAINTENANCE Spark Arrestor WARNING Failure to heed the following warnings while servicing the spark arrestor could result in serious injury or death.Do not perform service on the spark arrestor while the system is hot. Exhaust system temperatures can reach 1000 ° F. Allow components to cool suff...

104 MAINTENANCE PVT System The basic operation of the Polaris PVT system is dependent on engine speed and vehicle torque requirements. As engine speed increases, the force exerted on the movable drive sheave by the flyweights also increases. This, in turn, increases the amount of pinch applied to th...

105 MAINTENANCE PVT System WARNING Failure to comply with the instructions in this warning can result in severe injury or death.Do not modify any component of the PVT system. Doing so may reduce its strength so that a failure may occur at a high speed. The PVT system has been precision balanced. Any...

106 MAINTENANCE Battery Your ATV may have either a sealed battery, which requires little maintenance, or a conventional battery. A sealed battery can be identified by its flat covers on the top of the battery. A conventional battery has six filler caps on the top of the battery.Always keep battery t...

107 MAINTENANCE Battery Battery Removal 1. Disconnect the hold-down strap holding the battery in position, and remove battery cover. 2. On conventional batteries, remove the battery vent tube.3. Disconnect the black (negative) battery cable first.4. Disconnect the red (positive) battery cable next.5...

108 MAINTENANCE Battery Battery Storage When the vehicle is placed in storage for three months or more, the battery should be removed, stored out of the sun in a cool, dry place and tested monthly. Before reusing, take the battery to your dealer for testing and recharging.Power plug leads may need t...

109 MAINTENANCE Battery Battery Charging (Sealed Battery) For a refresh charge, follow all instructions carefully.1. Check the battery voltage with a voltmeter or multimeter. A fully charged battery will register 12.8 V or higher. 2. If the voltage is less than 12.8 volts, recharge the battery. NOTE...

110 MAINTENANCE Accessories Auxiliary power outlets provide 12V power for operating accessories such as hand held spot lights. Accessory outlets are available for all models. Polaris also has a wide range of additional accessories available for your ATV. See your Polaris dealer. Cleaning and Storage...

111 MAINTENANCE Cleaning and Storage Storage Tips CAUTION Starting the engine during the storage period will disturb the protective film created by fogging and damage could occur. Never start the engine during the storage period. Clean the Exterior Make necessary repairs and then clean the ATV thoro...

112 MAINTENANCE Cleaning and Storage Storage Tips Fog the Engine 1. Treat the fuel system with Polaris Carbon Clean, following the instructions on the can. Run the engine for several minutes so the Carbon Clean reaches the injector. Turn the engine off. 2. Remove the spark plug and add 2-3 tablespoo...

113 MAINTENANCE Cleaning and Storage Storage Tips Inspect and Lubricate Inspect all cables and lubricate. Follow lubrication guidelines in the Maintenance Section of the service or owner’s manual to completely grease and lubricate the entire vehicle with Polaris Premium All Season Grease. Battery Ma...

114 MAINTENANCE Transporting the ATV Follow these procedures when transporting the vehicle.1. Turn off the engine and remove the key to prevent loss during transporting. 2. Place the transmission in PARK. Lock the parking brake. 3. Securely install the fuel cap, oil cap and seat. 4. Always tie the f...

115 ADJUSTMENTS Camber and Caster The camber and caster are non-adjustable. Rear Spring The rear shock absorber spring is adjusted by rotating the adjuster (1) either clockwise or counterclockwise to increase or decrease spring tension. NOTE: Accessory springs are available through your Polaris deal...

1 2 3 116 ADJUSTMENTS Throttle Body/Idle RPM Idle RPM is preset by the manufacturer. If the engine idle speed is not satisfactory, please see your Polaris dealer for adjustment. Throttle Cable Freeplay Throttle cable freeplay is adjusted at the handlebar.1. Locate the throttle cable adjuster on the ...

117 POLARIS PRODUCTS Part No. Description Engine Lubricant 2870791 Fogging Oil (12 oz. Aerosol) 2871281 Premium 4 Synthetic 0W-40 (4-Cycle) Engine Oil (qt.) 2871844 Premium 4 Synthetic 0W-40 (4-Cycle) Engine Oil (gal.) Gearcase / Transmission Lubricants 2873602 Premium AGL Synthetic Gearcase Lube (q...

118 TROUBLESHOOTING Contact your Polaris dealer for service if you’re unable to identify solutions using the following charts. Drive Belt and Cover Problems Possible Cause Solution Driving onto a pickup or tall trailer in high range Shift transmission to low range during loading of the ATV to preven...

119 TROUBLESHOOTING Engine Doesn’t Turn Over Possible Cause Solution Low battery voltage Recharge battery to 12.5 VDC Loose battery connections Check all connections and tighten Loose solenoid connections Check all connections and tighten Engine Turns Over, Fails to Start Possible Cause Solution Out...

120 TROUBLESHOOTING Engine Pings or Knocks Possible Cause Solution Poor quality or low octane fuel Replace with recommended fuel Incorrect ignition timing See your Polaris dealer Incorrect spark plug gap or heat range Set gap to specs or replace plug Engine Runs Irregularly, Stalls or Misfires Possi...

121 TROUBLESHOOTING Engine Stops or Loses Power Possible Cause Solution Out of fuel Refuel Kinked or plugged fuel vent line Inspect and replace Water present in fuel Replace with new fuel Fouled or defective spark plug Inspect, clean and/or replace spark plug Worn or defective spark plug wires See y...

122 SPECIFICATIONS SPORTSMAN X2 500 EFI Gross Vehicle Weight 1500 lbs./680 kg Hitch Towing Rating 1 225 l bs./556 k g Unbraked Trailer Towing Capacity* 1995 lbs./905 kg Hitch Tongue Capacity 120 lbs./54.4 kg (Rear box capacity and tongue weight not to exceed 400 lbs./181 kg) Front Rack/Storage Box C...

123 SPECIFICATIONS SPORTSMAN X2 500 EFI Shift Type Side Lever (H/L/N/R/P) Gear Reduction - Low 23.91/1 Gear Reduction - Reverse 21.74/1 Gear Reduction - Forward 10.57/1 Drive Ratio - Front 3.82/1 Tire, Front Carlisle AT489 25 x 8 - 12 (5 psi) Tire, Rear Carlisle AT489 25 x 11 - 12 (5 psi) Front Brak...

124 WARRANTY LIMITED WARRANTY Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, gives a SIX MONTH LIMITED WARRANTY on all components of the Polaris All Terrain Vehicle (ATV) against defects in material or workmanship. Polaris also gives a one year limited warranty on the final drive chain for f...

126 WARRANTY ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE SIX MONTH WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. Some states ...

127 WARRANTY Exported Vehicles EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS VEHICLE IF IT IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER’S AUTHORIZED LOCATION. This policy does not apply to vehicles that have received authorization for expor...

128 WARRANTY Exported Vehicles How to Get Service If Purchased From A Private Party: If you purchase a Polaris product from a private citizen outside of the country in which the vehicle was originally purchased, all warranty coverage will be denied. Notice If your vehicle is registered outside of th...

130 MAINTENANCE LOG Use the following chart to record periodic maintenance. DATE MILES (KM) TECHNICIAN SERVICE PERFORMED / COMMENTS

132 INDEX A Accessories 110 . . . . . . . . . . . . . . . . . . Adjustments 115-116 . . . . . . . . . . . . . . Age Restrictions 12 . . . . . . . . . . . . . . . Air Filter Service 96 . . . . . . . . . . . . . . . All Wheel Drive 43-44 . . . . . . . . . . . . . Automatic Transmission 42 . . . . . . ...