Pioneer UYB024GMFILCAD-16 - Manuals

Page 2 - INDOOR UNIT; NOTE

INDOOR UNIT OUTDOOR UNIT 123456 7 89 Display Panel Connecting Pipe Air Inlet Drain Pipe Air Outlet Installation Section Remote Controller Fig.1 Air Flow Louver (at Air Outlet) Air Inlet (and Air Filter within) INDOOR UNIT OUTDOOR UNIT 1 2 3 5 4 7 6 8 8 9 All graphics in this manual are for explanato...

Page 3 - IMPORTANT SAFETY INFORMATION; CAUTION; CONTENTS; WARNING

1 owner’s manual 1. IMPORTANT SAFETY INFORMATION To prevent injury to the user or other persons, as well as property damage, the following instructions must be followed. Incorrect operation due to ingnorance of instructions may cause product damage or personal harm. Consult your dealer for installat...

Page 4 - Do not operate the air conditioner with wet hands.; Do not touch the heat exchanger fins.; Arrange the drain hose to ensure smooth drainage.; TEMPORARY OPERATIONS; Function Indicators on Indoor Unit Display Panel

owner’s manual 2 PRE-DEF Indicator(cooling and heating- type) or Fan-Only Indicator(cooling-only type) Infrared Signal Receiver Infrared Signal Receiver Operation Lamp Operation Lamp Timer Indicator Alarm Indicator Alarm Indicator Temporary Button Temperature Indicator Timer Indicator PRE-DEF Indica...

Page 6 - Three-Minute Protection Feature; HINTS FOR ECONOMICAL OPERATION; ADJUSTING AIR FLOW DIRECTION; Manual Swing; When heating

owner’s manual 4 Three-Minute Protection Feature A protection feature prevents the air conditioner from being activated for approximately 3 minutes, when it restarts immediately after operation. Power failure Power failure during operation will stop the unit completely. The OPERATION lamp on the ind...

Page 7 - Maintenance After a Long Break Period; Never use a damp cloth on the remote controller.; THE FOLLOWING SYMPTOMS ARE; Symptom 1: System does not operate

owner’s manual 5 Maintenance After a Long Break Period (e.g. at the beginning of the season) Maintenance before a Long Stop Period (e.g. at the end of the season) Check and remove everything that might be blocking inlet and outlet vents on the indoor units and outdoor units. Clean the air filters an...

Page 8 - Symptom 3: White mist comes out of a Unit; Symptom 5: Dust comes out of the Unit; TROUBLESHOOTING

owner’s manual 6 Symptom 2: System switches to Fan Mode during Cooling Mode Symptom 3: White mist comes out of a Unit Symptom 4: Noise of Air Conditioners cooling In order to prevent indoor evaporator frosting, the system will switch to fan mode automatically, and will restore back to cooling mode s...

Page 10 - Solution

owner’s manual 8 Clean the heat exchanger.Clean the air filter.Eliminate all contaminants and make filtrate the air.Close doors and windows.Draw curtains closed in order to shield from sunshine.Reduce heat source.A/C cooling capacity is reduced (normal).Check leakage and recharge refrigerant. The ai...

Page 11 - Malfunctions of Remote Controller

Symptoms Causes The fan speed can not be changed. Check whether the MODEindicated on the display is"AUTO" Check whether the MODEindicated on the display is"DRY" When the automatic mode isselected, the air conditioner willautomatically change the fanspeed. When dry operation is select...