Pioneer SPH 10BT - Manuals

- 5 - - 5 - Eng lis h WARNING • Detach the smartphone from the holder while driving under bad road conditions since the smartphone may fall from the holder. • Do not leave the smartphone attached onto the holder. • Do not use the holder if you experience difficulty when attaching the smartphone onto...

- 6 - Eng lis h CAUTION Make sure that the line can be seen when the holder is pulled up vertically. 4 Attach the front panel to the unit (page 4). Adjusting the smartphone holder horizontally 1 Slide the holder while the holder is in a horizontal position.

- 7 - - 7 - Eng lis h NOTE Detach the smartphone from the device while adjusting the holder. 2 Pull up the holder. Attaching the smartphone to the holder CAUTION • Depending on the shape of the smartphone, smartphone case or cover, it may not be attachable to the holder. • Be careful not to pinch yo...

- 9 - - 9 - Eng lis h Adjusting the smartphone holder Adjusting the holder angle The holder angle range:Downward 45° to upward 100° WARNING Do not set the holder where it may (i) interfere with vehicle panels or switches or (ii) impair the driver’s performance. Turning the smartphone holder from a h...

- 10 - Eng lis h CAUTION Be careful to not drop the smartphone when the smartphone is attached to the holder while rotating. Detaching the smartphone from the holder 1 Pull out the smartphone while pushing up the upper arm with the smartphone. CAUTION • Be careful to not drop the smartphone. • Do no...

- 11 - - 11 - Eng lis h 4 Attach the front panel to the unit (page 4). 1 Press and hold until the unit turns off. 2 Press and hold to display the main menu. 3 Press to select [INITIAL], then press to confirm. 4 Press to select an option, then press to confirm. INITIAL settings Menu Item Description ...

- 12 - Eng lis h The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS (radio data system) function only works in areas that broadcast RDS signals for FM stations. 1 Press to sel...

- 13 - - 13 - Eng lis h To store stations manually This function is only available on Pioneer Smart Sync (page 17). For details, see the application's help section. The unit searches for a station by PTY (program type) information. 1 Press and hold during FM reception. 2 Press to select [FUNCTION], ...

- 14 - Eng lis h CAUTION Use a USB cable (sold separately) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous. Before removing the device, stop playback. AOA connections A device running Android OS 4.1 or later installed a...

- 15 - - 15 - Eng lis h 3 Make sure the same 6-digit number appears on this unit and the device, then select [Y] if the 6-digit numbers displayed on this unit and the device are the same. Bluetooth reconnection Once the Bluetooth connection is established with the device, you can connect the device ...

- 16 - Eng lis h Voice recognition This function is only available when an iPhone/Android device equipped with voice recognition is connected to the unit via Bluetooth. 1 Press then talk into the microphone to input voice commands. To exit the voice recognition mode, press and hold . NOTE For detail...

- 17 - - 17 - Eng lis h Basic operations You can make various adjustments in Pioneer Smart Sync (page 17). Pioneer Smart Sync is the application that intelligently brings your maps, messages, and music together in the vehicle.You can operate the unit from Pioneer Smart Sync installed on an iPhone/An...

- 18 - Eng lis h NOTE Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version. What kind of function does the application have? Promoting the use of the unit The interface of the unit can be evolved by using your ...

- 19 - - 19 - Eng lis h NOTES • Some functions may be restricted depending on the connection conditions with the application. • The 31 Band EQ setting is converted into 13 bands when a music source from this product is engaged. TIP It is recommended to enter the search term "Pioneer Smart Sync&#...

- 20 - Eng lis h NOTES • If Pioneer Smart Sync has not been installed on your iPhone/Android device yet, a message that prompts you to install the application will appear on your iPhone/Android device. • When you connect a mobile device other than an iPhone/Android device, it may not operate correct...

- 21 - - 21 - Eng lis h NOTE The setting operation from this unit is not available when Pioneer Smart Sync is connected. 1 Press and hold to display the main menu. 2 Press to select one of the categories below, then press to confirm. • FUNCTION settings (page 21) • AUDIO settings (page 22) • SYSTEM ...

- 22 - Eng lis h AF [Y], [N] Allow the unit to retune to a different frequency providing the same station. (Available only when FM band is selected.) NEWS [Y], [N] Interrupt the currently selected source with news programs. (Available only when FM band is selected.) SEEK [MANUAL], [P.CH] Assign or b...

- 23 - - 23 - Eng lis h *1 Not available when [SUB/SUB] is selected in [SP-P/O] in the INITIAL settings (page 11).*2 Not available when [FUL/FUL] is selected in [SP-P/O] in the INITIAL settings (page 11). You can also access to these menus when the unit is turned off. SUB.W *2 [Y], [N] Set to [Y] wh...

- 25 - - 25 - Eng lis h continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory) position. Information on the connections for each device The available sources differ depending on the setting value.Please set [APP CTL] according to the table for the source ...

- 27 - Eng lis h The display automatically returns to the normal display. → No operations have been made for about 30 seconds.– Perform an operation. The sound is intermittent. → You are using a device, such as a cellular phone, that may cause audible interference.– Move electrical devices that may ...

- 28 - Eng lis h HUB ERR → The USB device connected via a USB hub is not supported by this unit.– Connect the USB device directly to this unit using a USB cable. CHECKUSB → The USB connector or USB cable has short-circuited.– Check that the USB connector or USB cable is not caught in something or da...

- 29 - Eng lis h become jammed under the brake or accelerator pedal. • Depending on the USB storage device, the following problems may occur.– Operations may vary.– The storage device may not be recognized. – Files may not be played back properly.– The device may cause audible interference when you ...

- 30 - Eng lis h AAC files FLAC files • FLAC files may not be playable, depending on the encoder. USB device • There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. This unit supports only the following iPhone models. Older versio...

- 31 - Eng lis h Example of a hierarchy Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. iTunes Apple and iTune...

- 32 - Eng lis h software without specific prior written permission. THIS SOFT WARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE D...