Pioneer 4300B - Manuals

2 REV-11 19, 12 Thank you for purchasing this pioneer quality product. Tools Required Adjustable Wrench Teflon Tape Rags Plumbers Putty Prior to Installation Observe all local plumbing and building codes before you begin • installation.Carefully shut off both hot and cold water supplies. • Plug the ...

3 REV-11 19, 12 Valve Installation Determine Hole Location :- This valve is designed for 8” to 20” center 1. widespread installation. So decide the Location of the mounting hole within that range. Determine the D1 dimension from the specification sheet for the desired trim set and add minimum 1/2” c...

4 REV-11 19, 12 Valve Installation 3. Thread locknut (B) and steel washer (C) on the shank (A) from the bot- tom of the shank (A). 4. Slide the shank (A) from the spout mounting hole. 5. Check the marking on the shank for finished deck or rim. Adjust the locknut (B) so that the distance between fini...

2 REV-11 19, 12 Thank you for purchasing this pioneer quality product. Tools Required Teflon Tape 3/32” Allen Wrench Prior to Installation Observe all local plumbing and building codes before you begin • installation.Carefully shut off both hot and cold main water supplies. • Roman Tub Valve (4300B)...

3 REV-11 19, 12 Trim Installation Confirm the test plug (A) is threaded to the spout shank (B). • Ensure the hot side valve and cold side valve are in fully closed posi- • tion. Turn on the main water supply. • Check for any leaks when the hot side and cold side valves are in • closed and open posit...

4 REV-11 19, 12 Trim Installation Remove the mudguards from the spout shank and valves. • Confirm the valve and spout height from the finished deck or rim(C) is • 1-3/4” and 1-3/8” respectively. Make necessary adjustment if necessary. • Carefully remove the test plug (A) from the spout shank (B) •