Peavey 684 - Manuals - manualsarea.com

Page 3 - Feedback Locating System; ENGLISH

XR ™ 684/684+ Powered Sound Reinforcement Mixing Console General Description:Congratulations on your purchase of the XR ™ 684/684+ powered mixer. Within one compact unit, we have packed feature after feature, each displaying the latest technology available. Both the XR 684and the XR 684+ are covered...

Page 5 - CHANNEL 9; CAUTION: DO NOT HOOK THE TAPE IN AND TAPE OUT TO THE INPUT AND

NOTE: Channels 5-9 contain features that differ from the previous channels.Only those features are mentioned below. For information on features not mentioned please refer to the section for Channels 1-4. CHANNELS 5-6 10. LINE: 1/4" balanced TRS input for line level signals. This signal is connec...

Page 6 - EFX Presets; PRESET

17. PRESET: Selects the effect preset from the list below. EFX Presets PRESET NAME TIME/SIZE COLOR/TONE 1 Chamber Time: 150 to 5,000 ms Damping (High Frequency) 2 Plate Time: 100 to 4,000 ms Damping (High Frequency) 3 Room Time: 150 to 5,000 ms Damping (High Frequency) 4 Cathedral Time: 100 to 8,000...

Page 8 - FUSE: This is the main safety fuse for the AC line voltage. Only

30. LEFT/MONO OUTPUT: This 1/4" jack provides an output from the Left Main mix to supply externalamp/speaker combinations. The level of this signal is determined by the Main Level control. When no plug isconnected to the Right Output (#31) then the right signal is mixed with the left, and both c...

Page 9 - XR

9 CHANNELS 1-4 HI-Z INPUT MIC PREAMP PA D T ONE CONTROL LO MID HI +48V PHANT ON LO-Z INPUT CHANNELS 5-6 LINE INPUT MIC PREAMP +48V PHANT ON LO-Z INPUT MONIT OR SEND CHANNEL GAIN EFX LEVEL T ONE CONTROL CHANNEL GAIN EFX LEVEL MONIT OR SEND CHANNELS 7-8 STEREO LINE INPUT LEFT/ MONO RIGHT +48V PHANT ON...

Page 13 - Input Specifications:

XR ™ 684 SPECIFICATIONS : Input Specifications: Function Input Z Input Gains Input Levels Bal/ Connector (ohms) control Min** Nominal* Max UnBal. Min setting Lo-Z 2 k Max w/o pad -60 dBu -30 dBu -11 dBu Bal. XLR: Pin 1 Gnd, (150 ohms) (50 dB) Pin 2 (+), Pin 3 (-) Channel 1-8 Max. w/pad -35 dBu -5 dB...

Page 14 - XR 684 Hum and Noise:

Frequency Response: Mic Input to L - R OutputLine Input to L - R OutputTo Power Amplifier Output 20 Hz — 20 kHz +0 dB/-1 dB20 Hz — 20 kHz +0 dB/-1 dB20 Hz — 20 kHz +0 dB/-1 dB Graphic Equalizer: Filter BandwidthFilter FrequenciesMaximum Boost and Cut 1 octave63, 125, 250, 500 1 k, 2 k, 4 k, 8 k, 16 ...

Page 15 - ohms minimum load for bridge output only; Greater than 26 dB; DDT

15 POWER SECTION(400 SC Module with DDT ™ ) Frequency Response:+0, -1 dB, 20 Hz — 20 kHz @ rated power Rated Power:• 210 watts RMS into 4 ohms, both channels driven • 150 watts RMS into 8 ohms, both channels driven • Bridge out 420 watts into 8 ohms* * 8 ohms minimum load for bridge output only Tota...

Page 16 - PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY

34 PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: July 1, 1998 What This Warranty CoversYour Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. What This Warranty Does Not CoverThe Warranty does not cover: (...

Page 17 - IMPORTANT SAFETY INSTRUCTIONS; All operating instructions should be followed.; SAVE THESE INSTRUCTIONS!

IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed. including the following.1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be retained for future reference. 3. Obey al...