Patton 3087 - Manuals - manualsarea.com

Page 2 - Model 3087 Quick Start Guide; Internal AC powqer supply with detachable power cord; Models with internal AC power supply; WARNING

2 Model 3087 Quick Start Guide 1.0 Power up the Bridge/Router Your ipRocketLink comes with one of the following power supply options: • Internal AC powqer supply with detachable power cord • External AC adapter with detachable power cord 1.1 Models with internal AC power supply 1. Insert the female ...

Page 3 - Configure the IP address; Connect a PC and log in; superuser; Modify the IP address

Model 3087 Quick Start Guide 3 3. Insert the male plug of the AC power cord into an AC power outlet (mains) (100-240 V AC). 1.3 Power-up indication The Power LED blinks as the ipRocketLink is powering up. When the Power LED stops blinking and remains lit, the ipRocketLink is ready for you to configu...

Page 4 - Note; Verify the new address is correct and save it in system memory.; Connect to the local IP network; Ethernet; figure 2; Ethernet Link; Connecting the ipRocketLink to the local IP network; Connect to Ethernet port

4 Model 3087 Quick Start Guide → → → → ip list interfaces <enter> IP Interfaces: ID | Name | IP Address | DHCP | Transport ---|------|----------------|----------|-------------- 1 | ip1 | 192.168.200.10 | disabled | <bridge> ---------------------------------------------- ------ 2. Modify ...

Page 5 - Log onto the GUI web management page; “Modify the IP address”; Model 3087 web management home page; Connect the serial port

Model 3087 Quick Start Guide 5 4.0 Log onto the GUI web management page You will now access the web management graphical user interface (GUI) to configure the ipRocketLink using a standard web browser (such as Netscape or Internet Explorer). 1. At your PC, open a web browser and enter the IP address...

Page 6 - Additional Information

6 Model 3087 Quick Start Guide Connect the serial cable to the ipRocketLink serial port as follows: 1. Attach the male connector of the serial cable to the female serial connector on the 3087 . 2. Attach the other end of the cable to the serial connector on local device’s serial port. Note The 3087’...

Page 7 - B.0 Appendix—Key factor y default parameters; Key factory default parameters.; C.0 Compliance Information; Parameter; Default

Model 3087 Quick Start Guide 7 B.0 Appendix—Key factor y default parameters Key factory default parameters. C.0 Compliance Information C.1 Compliance EMC Compliance: • FCC Part 15, Class A • EN55022, Class A • EN55024 Safety Compliance: • UL 609501-1/CSA C22.2 N0. 60950-1 • IEC/EN 60950-1 • AS/NZS 6...

Page 8 - C.3 EC Declaration of Conformity; ment and the mutual recognition of their conformity.; C.3 “EC Declaration of Conformity”; for English version); Produktbezeichnung; Anerkennung ihrer Konformität.

8 Model 3087 Quick Start Guide C.2 Radio and TV interference (FCC Part 15) This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television recep-tion. Th...

Page 9 - Industry Canada Notice

Model 3087 Quick Start Guide 9 Die unterzeichnete Konformitätserklärung kann heruntergeladen werden von: www.patton.com/ certifications/. 3.5 FCC Part 68 (ACTA) Statement This equipment complies with Part 68 of FCC rules and the requirements adopted by ACTA. On the bottom side of this equipment is a...

Page 10 - Copyright statement; The term

10 Model 3087 Quick Start Guide Copyright statement Copyright © 2006, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks statement The te...