Patton 2113 - Manuals

Patton 2113 – Manual in PDF format online.

Manuals:

Manual

Manual Patton 2113

Summary

Page 2 - CONTENTS

2 CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference............................................................ 3 1.2 CE Declaration of Conformity ....................................................... 3 1.3 Authorize...

Page 3 - be liable for any damages incurred by the use of this; Patton Electronics; Note; Conformity documents of all Patton products can be viewed; RADIO AND TV INTERFERENCE

3 1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 2113 or 2115 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the shipment. This warranty is limited to defects in workmanship or materials, ...

Page 4 - AUTHORIZED EUROPEAN REPRESENTATIVE; . If requested, this number must be provided to the; INDUSTRY CANADA NOTICE

4 The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the above directive is indicated by the CE sign on the device. 1.3 AUTHORIZED EUROPEAN REPRESENTATIVE D R M Green, European Compliance Services Limited.Oakdene House, Oak Road , Watchfield, Swindon,...

Page 6 - EMC; • FCC Part 15, Class A; Safety; Technical support is available from; Packages received without an RMA number will not be

6 1.6 COMPLIANCE EMC • FCC Part 15, Class A • EN55022, Class A • EN55024 Safety • UL 60950-1/CSA C22.2 N0. 60950-1 • IEC/EN60950-1 • AS/NZS 60950-1 PSTN Regulatory • FCC Part 68 • CS03 • TBR12 & 13 • AS/ACIF S016:2001 • AS/ACIF S043:2003 1.7 SERVICE All warranty and non-warranty repairs must be ...

Page 7 - SAFETY WHEN WORKING WITH ELECTRICITY; WARNING

7 Alternate Patton support for Europe, Middle East, and Africa (EMEA) • Telephone support: Standard telephone support is available five days a week—from 8:00 am to 5:00 pm CET ( 0900 to 1800 UTC/GMT )— by calling +41 (0)31 985 25 55 • Fax: +41 (0)31 985 25 26 1.8 SAFETY WHEN WORKING WITH ELECTRICITY...

Page 8 - at; no configuration required; • Data rates up to 2.048 Mbps in 64-kbps intervals

8 2.0 GENERAL INFORMATION Thank you purchasing this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for one year for parts and labor. If questions arise while installing or using this product, contact Technical Support at +1 (301) 975-1007 . 2.1 FEA...

Page 9 - See Figure 1 and Figure 2 for the rear-panel connectors; from

9 3.0 INSTALLATION Because the CopperLink-T T1/E1 Extenders require no configuration, they can be installed quickly. Installation consists of the following: • Connect the power plug (refer to section 3.1, “Connecting Power” on page 10). • Connect the line port (refer to section 3.3, “Connecting the ...

Page 10 - CONNECTING POWER; Connect the female plug of the AC power cord to the AC adaptor; POWER INPUT CONNECTOR; The CopperLink-T T1/E1 Extender comes with an AC power supply.; External AC universal power supply; CAUTION

10 3.1 CONNECTING POWER Your CopperLink-T T1/E1 Extender comes with an external AC adaptor with a detachable power cord. To connect power to the CopperLink-T: 1. Connect the female plug of the AC power cord to the AC adaptor provided. 2. Connect the barrel-type connector of the AC adaptor to the Pow...

Page 12 - Model Number

12 Note The unit marked as 2113/L or 2115/L is configured by default to accept timing from the T1/E1 circuit. The 2113/R or 2115/R unit then recovers this timing from the line in order to ensure synchronization of the T1/E1 circuit over the extenders. Figure 4. The label showing the specific model n...

Page 13 - FRONT PANEL LED STATUS MONITORS; LED

13 4.0 OPERATION Once the CopperLink-T T1/E1 Extenders are properly installed, they should operate transparently. No user settings required. This section describes reading the LED status monitors. 4.1 FRONT PANEL LED STATUS MONITORS Models 2113 and 2115 feature three front-panel LEDs that monitor po...

Page 14 - CONFIGURATION AND DIP SWITCHES; The user; should NOT; change any of the dip switches except; will affect; the operation of; Switch S1-7 defines the shape of the waveform on the T1 or E1 line.; Switch

14 4.2 CONFIGURATION AND DIP SWITCHES The CopperLink-T™ T1/E1 Extenders are Plug ‘n’ Play enabled and do not require any configuration by the user. Note The user should NOT change any of the dip switches except for S1-7 (if necessary). If the user changes the position of any of the dip switches (exc...

Page 15 - APPENDIX A; SPECIFICATIONS; A.2 CIRCUIT INTERFACE; • AC power supply

15 APPENDIX A SPECIFICATIONS A.1 CIRCUIT RATES • Model 2113 - 2.048 Mbps • Model 2115 - 1.544 Mbps A.2 CIRCUIT INTERFACE • E1 (Model 2113) presents G.703/G.704 interface. Either 75 Ohms (unbal- anced) or 120 Ohms (balanced). Pins 1 & 2 are Receive. Pins 4 & 5 are transmit. • T1 (Model 2115) ...

Page 16 - A.8 TRANSMISSION LINE; • Single Twisted Pair; A.11 LINE PHYSICAL CONNECTION

16 A.7 ENVIRONMENTAL • Temperature: 32–122°F (0–50°C) • Relative Humidity: 5–95%, non-condensing • Altitude: 0–15,000 ft (0–4,572 m) A.8 TRANSMISSION LINE • Single Twisted Pair A.9 LINE CODING • TC-PAM (Trellis Coded Pulse Amplitude Modulation) A.10 LINE INTERFACE • Transformer coupled, 2500 VRMS is...

Page 17 - APPENDIX B; This information is provided for informational purposes only.; B.1 SWITCH S1 - FACTORY DEFAULT CONFIGURATION

17 APPENDIX B FACTORY DEFAULT DIP SWITCH CONFIGURATION Note This information is provided for informational purposes only. These settings should not be changed other than by instructions from Patton Support, lest the unit be rendered inoperable. B.1 SWITCH S1 - FACTORY DEFAULT CONFIGURATION B.2 SWITC...

Page 18 - NOTES

18 NOTES _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _...

Page 20 - Patton Electronics Company

20 NOTES _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _...