Patton 1195/4E1 - Manuals - manualsarea.com

Page 2 - WARNING

2 Model 1195/4E1 Quick Start Guide • This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. • Mains Voltage: Line voltages are present when the power cord is con- nected. The mains outlet shall be...

Page 3 - Connecting power; DC Mains version; To connect the AC 220V power:

Model 1195/4E1 Quick Start Guide 3 1.0 Connecting power AC Mains version: Please use the AC main cable (provided) to connect the system to your AC mains power outlet. DC Mains version : Please connect the DC mains cable (provided) to the system. The polarity should not be reversed while connecting. ...

Page 4 - Connecting the optical interface; Note; Do not expose to the naked eye.

4 Model 1195/4E1 Quick Start Guide 1.3 Grounding When the equipment is used with the AC~220V power supply, the 3-core socket must be grounded for protec-tion.The other equipment, e.g. optical terminal, connected with this equipment must also be groundedTo connect the Earth: 2.0 Connecting the optica...

Page 6 - Connecting E1 Links; Definition for E1 Interfaces; Connecting Ethernet Links; Verifying the connection

6 Model 1195/4E1 Quick Start Guide 4.0 Connecting E1 Links Connect E1 line after ensuring that transmission device have been grounded. A Bit Error Rate (BER) test may be conducted on E1 Link using a BERT tester to ensure that the E1 errors are within the permitted limits / threshold. 4.1 Definition ...

Page 7 - An RS-232 COM port cable is provided with the 1195/4E1 system.; Twisted pair cable - solid conductor

Model 1195/4E1 Quick Start Guide 7 6.0 Connecting the RS-232 port Note An RS-232 COM port cable is provided with the 1195/4E1 system. 6.1 RS-232 port cable details End 1 End 2 Type of cable Twisted pair cable - solid conductor Number of pairs 2 Diameter 24 AWG Length 3 meters Connections As per deta...

Page 8 - RS-232 input signal for management; Others

8 Model 1195/4E1 Quick Start Guide 6.2 RS-232 pin definition DB-9 Pin Number Definition RS-232 2 RS-232 input signal for management 3 RS-232 output signal for management 5 GND Others NC

Page 9 - Configuring HyperTerminal; Click on the Start button from the task bar on your PC.

Model 1195/4E1 Quick Start Guide 9 7.0 Configuring HyperTerminal 1. Click on the Start button from the task bar on your PC. 2. Select Programs > Accesories > Communications > HyperTerminal. The following screen will display: 3. Enter a name for the new connection and click OK. The connectio...

Page 10 - that came with your unit.; Bits per second

10 Model 1195/4E1 Quick Start Guide 5. Change the Bits per second option to 19200 and change the flow control option to None.The COM Properties settings should be: 6. Click Apply, then click OK. 7. A new HyperTerminal session screen will display. Press Enter. The system prompt will appear on the scr...

Page 11 - Additional Information; Refer to the; A.0 Customer and Technical Support; with a VoIP SIP client

Model 1195/4E1 Quick Start Guide 11 8.0 Additional Information Refer to the Model 1195/4E1 Getting Started Guide located on the CD-ROM shipped with your device . For detailed information about: • Installing, configuring, operating, and troubleshooting A.0 Customer and Technical Support Toll-Free VoI...

Page 12 - Copyright statement

12 Model 1195/4E1 Quick Start Guide Copyright statement Copyright © 2009, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. In accordance with the ...