Patton 10100 - Manuals - manualsarea.com

Page 2 - SmartNode 10100 Series Quick Start Guide; Limited Power Source; WARNING

2 SmartNode 10100 Series Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter...

Page 3 - Before you Begin; Note; Two DC power cable; • To properly guard against ESD damage and shocks, the wrist strap; CAUTION

SmartNode 10100 Series Quick Start Guide 3 1.0 Before you Begin In the box, you will find: • One SmartNode 10100 • One set of mounting brackets with screws • One DB-9 to RJ-45 adapter • Three CAT5 Ethernet straight cables (male-male), three meters in length • One warranty sheet • One packing slip • ...

Page 4 - Installing the rack hardware; Connect the Ethernet port to your management network.; Connecting to the VoIP Network; Connecting the VoIP ports

4 SmartNode 10100 Series Quick Start Guide 2.0 Installing the rack hardware 1. Connect the Ethernet port to your management network. Figure 1. Installing the SN10100 3.0 Connecting to the VoIP Network 1. Connect a CAT5 Ethernet cable to VoIP0 at the rear of the SN10100. Connect the other end of the ...

Page 5 - Connecting to the PSTN Network; depends on the licenses purchased.; Repeat step 1, using the next available port.; Connecting to the Power source

SmartNode 10100 Series Quick Start Guide 5 4.0 Connecting to the PSTN Network A SN10100 with 8 RJ48C type ports enables the connection to T1/E1 lines. Note T1/E1 ports are activated by software license; the number of active ports depends on the licenses purchased. 1. Start with port 0, located at th...

Page 7 - Connecting to the Control host; . If it is not possible to connect to the; Connecting the Console Serial port; Computer to the Console Serial port; Connecting the Ethernet management interface; on the front of the

SmartNode 10100 Series Quick Start Guide 7 6.0 Connecting to the Control host 1. Connect to the Control host through the Console Serial port (see 6.1 “Connecting the Console Serial port”) OR the Ethernet management interface (see 6.2 “Connecting the Ethernet management interface”).The IP address of ...

Page 8 - Configuring the SmartNode; “Accessing the SmartNode via the Console Serial port”; Accessing the SmartNode via the Console Serial port; None

8 SmartNode 10100 Series Quick Start Guide 2. Login to the SmartNode using the specific credentials included on the “Important Notice” sheet that shipped with your unit. The management port is configured with a static Class C IP address by default. Figure 7. Conneting the management interface 7.0 Co...

Page 9 - Accessing the SmartNode via the Ethernet manage-; Logging into the Web Interface; Connecting to the web ser ver

SmartNode 10100 Series Quick Start Guide 9 7.2 Accessing the SmartNode via the Ethernet manage- ment port Logging into the SmartNode via SSH 1. To physically connect the Ethernet management port, follow the instructions in section 6.2, “Connecting the Ethernet management interface” on page 7. 2. To ...

Page 10 - Additional Information; EMC; A.2 Radio and TV Interference

10 SmartNode 10100 Series Quick Start Guide – Default password: root 9.0 Additional Information Refer to the following manuals—available online at www.patton.com/manuals—for detailed information about installing, configuring and operating the SN10100 models, along with warranty, trademark and compli...

Page 11 - A.3 CE Declaration of Conformity; B.0 Customer and Technical Support; with a VoIP SIP client

SmartNode 10100 Series Quick Start Guide 11 A.3 CE Declaration of Conformity Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other rele-vant provisions of Directive 1999/5/EC. The Declaration of Conformity may be obtained from Patton Electron-ic...

Page 12 - Copyright statement; The term

12 SmartNode 10100 Series Quick Start Guide Copyright statement Copyright © 2013, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks stat...