Page 3 - Summar y Table of Contents
3 Summar y Table of Contents 1 Product Overview .......................................................................................................................................... 14 2 Application Overview ..........................................................................................
Page 4 - Table of Contents
4 Table of Contents Summary Table of Contents ........................................................................................................................... 3 Table of Contents .................................................................................................................
Page 5 - System Management Access
5 OnSite Series Getting Started Guide OnSite System Installation ....................................................................................................................................29 Mounting the Chassis to an EIA/TIA 19-Inch Rack .......................................................
Page 6 - Terms and Acronyms
6 OnSite Series Getting Started Guide Model OS1052 ......................................................................................................................................................60 Trunk Interfaces ..................................................................................
Page 7 - List of Figures
7 List of Figures 1 OnSite Model 1052 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2 OnSite Model 1063 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 8 - List of Tables
8 List of Tables 1 General conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2 Mouse conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 9 - About this guide; Administrator’s Reference Guide; Note; Audience
9 About this guide This guide describes how to install a Patton OnSite Series Model 1052 and1063 Metro-Optical Transport Access Node. For detailed configuration and management instructions, refer to the OnSite 1052 & 1063 Series Administrator’s Reference Guide , which is located on the CD-ROM th...
Page 10 - Structure; before; Precautions; Warnings
10 OnSite Series Getting Started Guide Structure This guide contains the following chapters and appendices: • Chapter 1 describes the OnSite Series Metro-Optical Transport Access Nodes • Chapter 2 describes typical applications for the OS-10 series • Chapter 3 describes instructions for installing t...
Page 11 - Typographical conventions used in this document; General conventions; Convention
11 OnSite Series Getting Started Guide Typographical conventions used in this document This section describes the typographical conventions and terms used in this guide. General conventions The procedures described in this manual use the following text conventions: Mouse conventions The following co...
Page 12 - Safety when using electricity; Power Cable
12 OnSite Series Getting Started Guide Safety when using electricity Follow these guidelines when working on equipment powered by electricity: • Locate the emergency power-off switch in the room in which you are working. Then, if an electrical acci- dent occurs, you can quickly turn off the power. •...
Page 13 - Electrostatic Discharge Damage; The OS-10 system uses a CLASS 1 laser device.
13 OnSite Series Getting Started Guide Electrostatic Discharge Damage Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. It can occur if electronic printed circuit cards are improperly handled and can cause complete or intermittent failures. Always follow these ESD p...
Page 14 - Chapter 1; Product Over view; Chapter contents
14 Chapter 1 Product Over view Chapter contents Introduction ..........................................................................................................................................................15 OnSite Platforms ....................................................................
Page 15 - OnSite Platforms
Introduction 15 OnSite Series Getting Started Guide 1 • Product Overview Introduction The OnSite Series is family of ultra-compact, micro multi-service provisioning platforms (µMSPPs). The sup-ports flexible and economic delivery of time division multiplexing (TDM) and Ethernet-based packet data ser...
Page 16 - Figure 3; SDH Trunks; Management; Expansion Slots
Introduction 16 OnSite Series Getting Started Guide 1 • Product Overview Figure 2. OnSite Model 1063 The OS1052 and OS1063 systems have two expansion slots. The expansion slots support the insertion of the following modules for flexible configuration changes and capacity upgrades: • 21-port E1 • 3-p...
Page 18 - Chapter 2; Application Over view
18 Chapter 2 Application Over view Chapter contents OS1052 Application ..............................................................................................................................................19 OS1063 Application ....................................................................
Page 20 - The base OS1052 system is configured with:
OS1052 Application 20 OnSite Series Getting Started Guide 2 • Application Overview The base OS1052 system is configured with: • 2 STM-1 • 8 E1/T1 • 2 Ethernet • 10/100Base-TX Two expansion module slots allow increasing system capacity beyond the initial base configuration. Additional ports and featu...
Page 22 - The base OS1063 system is configured with:
OS1063 Application 22 OnSite Series Getting Started Guide 2 • Application Overview The base OS1063 system is configured with: • 2 STM-1 • 21 E1/T1 Two expansion module slots allow increasing system capacity beyond the initial base configuration. Additional ports and features only require simple inse...
Page 23 - Chapter 3; Installation Over view
23 Chapter 3 Installation Over view Chapter contents Introduction ..........................................................................................................................................................24 Unpacking and Inspection .......................................................
Page 24 - To check the contents of the shipping cartons, follow these steps:; Site Preparation
Introduction 24 OnSite Series Getting Started Guide 3 • Installation Overview Introduction This chapter provides the procedures for installing the OnSite OS-10 system. Unpacking and Inspection Do not unpack the OS-10 system until you are ready to install it. If the final installation site will not b...
Page 25 - Site Environment; Site Requirements
Site Environment 25 OnSite Series Getting Started Guide 3 • Installation Overview Site Environment The OS-10 system can be mounted in a rack or on a wall. The location of the chassis and layout of your equip-ment rack or wiring room are extremely important for proper system operation. Equipment that...
Page 26 - Distribution rack requirements; Temperature –; Install a reliable air conditioning and ventilation system.; Airflow requirements –; tions when you are installing your chassis:; Humidity –; Table 4; Temperature; Humidity
Planning Your Site 26 OnSite Series Getting Started Guide 3 • Installation Overview • Distribution rack requirements The following sections provide further details for each area. Operating Environment Requirements You need to verify that your site meets all environmental and safety requirements. Dur...
Page 27 - Power Supply Requirements; Distribution Rack Requirements
Planning Your Site 27 OnSite Series Getting Started Guide 3 • Installation Overview Power Supply Requirements To operate your OS-10 equipment safely, follow these requirements: • Ensure that your power supply meets the site power requirements of the equipment to be installed. • Check the power at yo...
Page 28 - Mechanical Recommendations for the Rack; Space Requirements for the Rack
Planning Your Site 28 OnSite Series Getting Started Guide 3 • Installation Overview Mechanical Recommendations for the Rack The following information will help you plan your equipment rack configuration: • Use a rack made of steel or aluminum. • Install equipment in the lower half of the rack first ...
Page 29 - Tools and Equipment for Installation and Maintenance; Number 1 or number 2 Phillips screwdriver; OnSite System Installation; Mounting the Chassis to an EIA/TIA 19-Inch Rack
Tools and Equipment for Installation and Maintenance 29 OnSite Series Getting Started Guide 3 • Installation Overview Tools and Equipment for Installation and Maintenance You need the following tools and equipment to install or upgrade the OS-10 system and its components: • ESD-preventive cord and w...
Page 30 - Mounting the Chassis to an ETSI Rack
OnSite System Installation 30 OnSite Series Getting Started Guide 3 • Installation Overview Note Take care to load the rack so that it is not top heavy. Note Do not cover vents that would restrict airflow. Leave a minimum of a half-rack space above and below the OS-10 system for adequate ven-tilatio...
Page 32 - Mounting the Chassis on the Wall; Install the two L mounting brackets in the orientation shown in
OnSite System Installation 32 OnSite Series Getting Started Guide 3 • Installation Overview Mounting the Chassis on the Wall Note When choosing a wall-mounting location, consider the cable limita-tions and the wall structure. Use the four L brackets provided for rack mounting to mount the chassis on...
Page 33 - Installing the Chassis Ground Connection; For a user-provided ring terminal—as required; The DC option provides reverse input polarity protection.
OnSite System Installation 33 OnSite Series Getting Started Guide 3 • Installation Overview Installing the Chassis Ground Connection The OS-10 system chassis requires a reliable earth ground connection. You must connect the chassis to a reli-able earth ground. The ground wire must be installed in ac...
Page 34 - Table 8; The input voltage tolerance limits for AC power are 100 to 245 VAC.
OnSite System Installation 34 OnSite Series Getting Started Guide 3 • Installation Overview Note The DC-to-DC converter has dual power inputs (A and B power). The system continues to operate normally if either the A or B power input fails. The system uses natural convection for heat dissipation (tha...
Page 35 - Powering On the OS-10 System with AC Power; Connecting DC Power to the OS-10 System; Wiring Procedure for DC Input Power; shows the terminal block for the DC power supply on the OS-10
OnSite System Installation 35 OnSite Series Getting Started Guide 3 • Installation Overview Powering On the OS-10 System with AC Power To power on the OS-10 system using AC power, follow these steps: 1. Connect the AC power cable to the OS-10 system and then to the wall outlet. 2. Turn the power swi...
Page 36 - Remove power from this circuit.; . The choice depends on the
OnSite System Installation 36 OnSite Series Getting Started Guide 3 • Installation Overview Figure 13. Wiring the OS-10 System for DC Power 1. Choose an available circuit from a DC power source and identify both the positive and negative leads for this circuit. Note The DC power source may be a DC c...
Page 38 - Turn on power to the DC circuit.; Checking the OS-10 System Installation
OnSite System Installation 38 OnSite Series Getting Started Guide 3 • Installation Overview 9. Connect the negative lead of the circuit to the “B” power input lead on the OS-10 system terminal block. See wiring 3-B on figure 13 on page 36. Note The terminal block indicates the “B” power lead by the ...
Page 39 - Chapter 4
39 Chapter 4 System Management Access Chapter contents Introduction ..........................................................................................................................................................40 General Overview .............................................................
Page 41 - connector pins for both ports.; Ethernet LAN Management Port; The port supports autonegotiation, which is always enabled.
Ethernet LAN Management Port 41 OnSite Series Getting Started Guide 4 • System Management Access Figure 15 provides a close-up view of the two management ports. The figure includes the location of the RJ-45 connector pins for both ports. Figure 15. Detail of the Management Ports Figure 16 shows the ...
Page 42 - provides the pin assignments for the RJ-45 connector.; Serial Management Port; provides; lists the serial port parameters:
Serial Management Port 42 OnSite Series Getting Started Guide 4 • System Management Access Table 11 provides the pin assignments for the RJ-45 connector. Serial Management Port The physical connector for the RS-232 SERIAL management port is an RJ-45 connector. Table 12 provides the pin assignments f...
Page 43 - Gaining Access to the System; Access through the Serial Port
Gaining Access to the System 43 OnSite Series Getting Started Guide 4 • System Management Access Gaining Access to the System There are two ways of gaining access to the system management functions. One way is through the SERIAL port and the command line interface (CLI). The other way is through the...
Page 44 - Access through the Ethernet LAN Management Port
Gaining Access to the System 44 OnSite Series Getting Started Guide 4 • System Management Access 8. Type the following CLI command to save the IP settings (address, net mask, and default gateway)for the Ethernet LAN management port to the system configuration file, and then press the Enter key: save...
Page 45 - “Web-Based Management Interface”; Web-Based Management Interface; Launching the GUI Application; super
Web-Based Management Interface 45 OnSite Series Getting Started Guide 4 • System Management Access See “Web-Based Management Interface” on page 45 for a description of the Web-based management interface features. Once you gain access to the system through the Ethernet LAN port, you may change the IP...
Page 46 - System Information; page. The OnSight DM screen is divided into three frames, as shown in
Web-Based Management Interface 46 OnSite Series Getting Started Guide 4 • System Management Access After successful completion of the login, the browser displays the OnSight DM splash screen from which you can select the language of your choice (English or Chinese, currently). After language selecti...
Page 47 - Autonomous Alarm Messages
Autonomous Alarm Messages 47 OnSite Series Getting Started Guide 4 • System Management Access Autonomous Alarm Messages You can configure the system to generate autonomous alarm messages that can be received and displayed by an SNMP-based network management system (NMS). By default, the system does ...
Page 49 - Dial tone
Engineering Orderwire (EOW) 49 OnSite Series Getting Started Guide 4 • System Management Access Engineering Orderwire (EOW) If the system is equipped with the factory-installed AUX (auxiliary) board, you can use AUX port 1 (AUX 1) for voice communications between two or more interconnected OnSite OS...
Page 53 - Chapter 5; Contacting Patton for assistance
53 Chapter 5 Contacting Patton for assistance Chapter contents Introduction ..........................................................................................................................................................54 Contact information ..................................................
Page 54 - This chapter contains the following information:; Contact information; Online support—available at; Warranty Service and Returned Merchandise Authorizations (RMAs); Warranty coverage
Introduction 54 OnSite Series Getting Started Guide 5 • Contacting Patton for assistance Introduction This chapter contains the following information: • “Contact information” —describes how to contact Patton technical support for assistance. • “Warranty Service and Returned Merchandise Authorization...
Page 55 - Return for credit policy; Patton Electronics Company
Warranty Service and Returned Merchandise Authorizations (RMAs) 55 OnSite Series Getting Started Guide 5 • Contacting Patton for assistance Return for credit policy • Less than 30 days: No Charge. Your credit will be issued upon receipt and inspection of the equipment. • 30 to 120 days: We will add ...
Page 56 - Appendix A; Compliance information
56 Appendix A Compliance information Chapter contents Compliance ...........................................................................................................................................................57 EMC ............................................................................
Page 57 - Compliance; EMC; Radio and TV Interference
Compliance 57 OnSite Series Getting Started Guide A • Compliance information Compliance EMC • EN 55022 Class A • FCC part 15 Class A Safety • EN 60950 • UL 60950 Radio and TV Interference The OnSite OS-10 Series generates and uses radio frequency energy, and if not installed and used properly-that i...
Page 58 - Declaration of Conformity; CE; The signed Declaration of Conformity can be downloaded at; Authorized European Representative; D R M Green
Declaration of Conformity 58 OnSite Series Getting Started Guide A • Compliance information If trouble is experienced with this equipment, for repair or warranty information, please contact our company. If the equipment is causing harm to the telephone network, the telephone company may request that...
Page 59 - Appendix B; Specifications
59 Appendix B Specifications Chapter contents Model OS1052 ......................................................................................................................................................60 Trunk Interfaces ..........................................................................
Page 60 - Packet Data
Model OS1052 60 OnSite Series Getting Started Guide B • Specifications Model OS1052 Trunk Interfaces STM-1: G.707, G.783 Optics: G.957 S-1.1, L-1.1 and L-1.2 options Client Interfaces E1: G.703, 75-ohm and 120-ohm options T1: G.703, 100-ohm Ethernet 10/100Base-TX: 802.3u Expansion Modules SDH: STM-1...
Page 64 - Appendix C
64 Appendix C Terms and Acronyms Chapter contents Abbreviations .........................................................................................................................................................65
Page 65 - Abbreviation
Abbreviations 65 OnSite Series Getting Started Guide C • Terms and Acronyms Abbreviations Abbreviation Meaning A AIS Alarm Indication Signal AMI Alternate Mark Inversion AU Administrative Unit AUX Auxiliary (port) B BIP Bit Interleaved Parity BBE Background Block Error BER Bit Error Rate BPV Bipolar...
Patton 1058
Manual
Patton 4520 Series
Manual
Patton 9300
Manual
Patton 4050 Series
Manual
Patton 2888
Manual
Patton 10200
Manual
Patton SmartNode 4300
Manual
Patton 5490
Manual
Patton 3088 Series
Manual
Patton 1080ARC
Manual
Patton 4950
Manual
Patton 3101
Manual
Patton 2821
Manual
Patton 2036
Manual
Patton 1058DVRC
Manual
Patton ACC-S02
Manual
Patton 2603
Manual