Page 4 - Table of contents
5 GB/IE Introduction Proper use ...............................................................................Page 7Features and equipment .........................................................Page 8Included items .........................................................................Page 8Tec...
Page 5 - Introduction; Read instruction manual!
6 GB/IE Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Danger to life! Risk of explosion! Risk of fire! Warning - Hot surfaces! V~ Volt (AC) W Watts (Effective power) W...
Page 6 - Please make sure you familiarise yourself fully with the way; Proper use
7 GB/IE Introduction Soldering station PLS 48 A1 Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle it correctly. Please read the operating instructions below. Be careful to keep these a...
Page 8 - Keep your working area clean and well lit.; Electrical safety; To avoid danger to life from electric shock:
9 GB/IE Safety advice Safety advice CAUTION! Failure to observe the instructions and advice given below may result in electric shock, fire and/or serious injury. 1. Workplace safety a) Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents. b) Do not work ...
Page 9 - Safety advice
10 GB/IE Safety advice c) Use a residual current device (RCD) for protection if operating the electrical power tool in a moist envi-ronment is unavoidable. The use of an RCD reduces the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry ...
Page 11 - Always wash your hands immediately after soldering .; Careful handling and use; Electrical
12 GB/IE Safety advice Do not eat, drink or smoke in rooms where soldering is carried out. Otherwise your hands may transfer any adhering traces of lead via food or cigarettes into your body. Always wash your hands immediately after soldering . Do not dispose of soldering waste with the household ru...
Page 12 - To do this follow these steps:
13 GB/IE Safety advice / Before first use Original accessories / attachments Use only the accessories detailed in the operating instructions. The use of attachments or accessories other than those recommended here could lead to you suffering an injury. Before first use Inserting / replacing soldering ...
Page 13 - Switching on and setting the temperature:
14 GB/IE Using the product Using the product Switching on / off and setting the temperature Switching on and setting the temperature: Insert the mains plug into a mains socket and press the ON / OFF switch 2 into position “ I ”. Turn the temperature control 6 to set the temperature you wish to have. ...
Page 14 - Using the product; Overheating protection:; Solder sponge
15 GB/IE Using the product Setting 5 = 500 °C maximum soldering temperature, e.g. for desolder- ing large soldered joints Switching off:Note: After use always replace the soldering pencil 1 into the holder. Press the ON / OFF switch 2 into setting “ 0 ”. If the device is not being used, pull the mai...
Page 16 - Have your device repaired only by; Warranty
17 GB/IE Maintenance and cleaning / Service centre / Warranty Clean the device after you have finished using it. Use a cloth and a little mild detergent for cleaning the device. In no circumstances use sharp objects, or petrol, solvents or clean-ing agents that might attack plastic. Do not allow any ...
Page 17 - Disposal; The packaging is wholly composed of environmentally-
18 GB/IE Warranty / Disposal The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repa...
Page 18 - Applicable harmonized standards
19 GB/IE Disposal / Declaration of conformity / Producer In accordance with European Directive 2002 / 96 / EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical devices must be collected separately and taken for environmentally c...
Page 19 - Declaration of conformity / Producer; Soldering station PLS 48 A1
20 GB/IE Declaration of conformity / Producer Type / Machine designation: Soldering station PLS 48 A1 Date of manufacture (DOM): 08 - 2010Serial number: IAN 54327 Bochum, 31.08.2010 Hans Kompernaß- Managing Director - We reserve the right to make technical modifications in the course of product devel...
Page 20 - Inhaltsverzeichnis
21 DE/AT/CH Einleitung Bestimmungsgemäßer Gebrauch ..........................................Seite 23Ausstattung ..............................................................................Seite 24Lieferumfang ...........................................................................Seite 24Techn...
Page 21 - Bedienungsanleitung lesen!
22 DE/AT/CH Einleitung Einleitung In dieser Bedienungsanleitung / am Gerät werden folgende Piktogramme verwendet: Bedienungsanleitung lesen! Warn- und Sicherheitshinweise beachten! Vorsicht vor elektrischem Schlag! Lebensgefahr! Explosionsgefahr! Brandgefahr! Warnung vor heißen Oberflächen! V~ Volt (...
Page 22 - Machen Sie sich vor der ersten Inbetriebnahme mit den; Bestimmungsgemäßer Gebrauch; Entsorgen Sie Verpackung und Gerät umweltgerecht!
23 DE/AT/CH Einleitung Regelbare Lötstation PLS 48 A1 Einleitung Machen Sie sich vor der ersten Inbetriebnahme mit den Funktionen des Gerätes vertraut und informieren Sie sich über den richtigen Umgang. Lesen Sie die nachfolgende Bedienungsanleitung. Bewahren Sie diese Anleitung auf. Händigen Sie al...
Page 24 - Halten Sie Ihren Arbeitsbereich sauber und gut beleuchtet.; Elektrische Sicherheit; Vermeiden Sie Lebensgefahr durch; Sicherheitshinweise
25 DE/AT/CH Sicherheitshinweise VORSICHT! Fehler bei der Einhaltung der nachstehend aufgeführten Anweisungen können elektrischen Schlag, Brand und / oder schwere Verletzungen verursachen. 1. Arbeitsplatz a) Halten Sie Ihren Arbeitsbereich sauber und gut beleuchtet. Unordnung und unbeleuchtete Arbeit...
Page 26 - Seien Sie stets aufmerksam, achten Sie darauf, was
27 DE/AT/CH Sicherheitshinweise mangels Erfahrung und / oder mangels Wissen be -nutzt zu werden, es sei denn, sie werden durch eine für ihre Sicherheit zuständige Person beaufsichtigt oder erhielten von ihr Anweisungen, wie das Gerät zu benutzen ist. Kinder sollten beaufsichtigt werden, um sicher- z...
Page 27 - Ziehen Sie bei Gefahr sofort den Netzstecker aus der Steckdose.
28 DE/AT/CH Sicherheitshinweise Vermeiden Sie den Kontakt der heißen Lötspitze mit den Kunststoff-teilen der Multifunktionshalterung. Andernfalls kann es zu Beschä-digungen am Gerät kommen. Ziehen Sie bei Gefahr sofort den Netzstecker aus der Steckdose. VORSICHT! VERGIFTUNGSGEFAHR! Halten Sie Dämpfe ...
Page 28 - Sicherheitshinweise / Vor der Inbetriebnahme; sind oder diese Anweisungen nicht gelesen haben.; Vor der Inbetriebnahme; Heizen Sie
29 DE/AT/CH Sicherheitshinweise / Vor der Inbetriebnahme sind oder diese Anweisungen nicht gelesen haben. Elektrowerkzeuge sind gefährlich, wenn sie von unerfahrenen Personen benutzt werden. b) Pflegen Sie das Gerät mit Sorgfalt. Kontrollieren Sie, ob Teile gebrochen oder so beschädigt sind, dass die...
Page 29 - Vor der Inbetriebnahme / Inbetriebnahme; Gehen Sie hierfür wie folgt vor:; Inbetriebnahme; Einschalten und Temperatur einstellen:
30 DE/AT/CH Vor der Inbetriebnahme / Inbetriebnahme Gehen Sie hierfür wie folgt vor: Stecken Sie den Netzstecker in eine Steckdose und drücken Sie den EIN- / AUS-Schalter 2 in die Position „ I “. Drehen Sie den Temperaturregler 6 auf 2 und lassen Sie etwas Lötzinn zu einem dünnen, zusammenhängenden ...
Page 32 - Lassen Sie Ihre Geräte von der; Garantie
33 DE/AT/CH Wartung und Reinigung WARNUNG! VERLETZUNGSGEFAHR! Ziehen Sie immer den Netzstecker aus der Steckdose und lassen Sie das Gerät abkühlen, bevor Sie Arbeiten am Gerät durchführen. Reinigen Sie das Gerät nach Abschluss der Arbeit. Verwenden Sie zur Reinigung des Gehäuses ein Tuch und ggf. ei...
Page 34 - Entsorgung; Die Verpackung besteht ausschließlich aus umweltfreundli-; Konformitätserklärung / Hersteller
35 DE/AT/CH CHKompernaß Service SwitzerlandTel.: 0848 000 525 (max. 0,0807 CHF/Min.) e -mail: [email protected] Entsorgung Die Verpackung besteht ausschließlich aus umweltfreundli- chen Materialien. Sie können in den örtlichen Behältern ent-sorgt werden. Werfen Sie Elektrogeräte nicht in den...