Parkside PLS 30 - Manuals

7 GB/IE/CY Introduction Do not eat! Do not drink! Dispose packaging and appliance in an environmentally-friendly way! Soldering gun with holder Q Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand ho...

8 GB/IE/CY Introduction Q Features and equipment 1 Soldering pencil 2 Soldering tip 3 Clamp screw 4 Helical spring 5 Clips 6 Third hand 7 Multifunctional holder 8 Solder sponge Q Included items 1 Soldering pencil1 Multifunctional holder1 Tin solder, 10 grams2 Soldering tips (1x installed)1 Solder sp...

9 GB/IE/CY Safety advice Safety advice J CAUTION! Failure to observe the instructions and advice given below may result in electric shock, fire and/or serious injury. 1. Workplace safety a) Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents. b) Do not...

10 GB/IE/CY Safety advice b) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. c) Use a residual current device (RCD) for protection if operating the electrical power tool in a moist envi­ronment is unavoidable. The use of an RCD re...

12 GB/IE/CY Safety advice ventilation of your working area. In addition, it is recommended that you wear protective gloves, a face mask and a protective apron. J Do not eat, drink or smoke in rooms where soldering is carried out. Otherwise your hands may transfer any adhering traces of lead via food...

13 GB/IE/CY Safety advice / Before first use Q Original accessories / attachments J Use only the accessories detailed in the operating instructions. The use of attachments or accessories other than those recommended here could lead to you suffering an injury. Q Before first use Q Fitting the helical...

14 GB/IE/CY Operation Q Operation The mains voltage must correspond with that shown on the sander rat-ing plate. Equipment labelled as 230 V may also be used with 220 V. Q Switching on and off Switching on: j Insert the mains plug into a suitable mains socket. Switching off: j Pull the plug out of t...

15 GB/IE/CY Operation / Maintenance and cleaning Q Soldering — The soldering pencil has a rated output of 30 watts and is there- fore ideal for electronics soldering. — The design of the soldering pencil makes it especially suitable for use where access is difficult or for fine soldering work. — To ...

16 GB/IE/CY Maintenance and cleaning / Service centre / Warranty j Clean the device after you have finished using it. j Use a cloth and a little mild detergent for cleaning the device. j In no circumstances use sharp objects, or petrol, solvents or cleaning agents that might attack plastic. j Do not...

17 GB/IE/CY Warranty The warranty covers only material or manufacturing faults, not normal wear or damage to fragile parts such as switches or rechargeable bat-teries. The appliance is intended solely for private, not commercial, use. If this product has been subjected to improper or inappropriate h...

18 GB/IE/CY Disposal Q Disposal The packaging and ancillary packing consist wholly of environmentally friendly materials. They can be disposed of at your local recycling facility. Do not dispose of electrical devices with the household rubbish! In accordance with European Directive 2002 / 96 / EC (c...

19 GB/IE/CY Declaration of conformity / Producer Q Declaration of conformity / Producer We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the following EU directives: EU Low Voltage Directive (2006 / 95 / EC) Electromagnetic Compatibility (2004 ...