Parkside PLP 100 A1 - Manuals

Page 5 - Table of contents

5 GB/IE Table of contents Introduction Proper use .............................................................................. Page 7Description of parts and features ......................................... Page 7Included items .......................................................................

Page 6 - Introduction; Read instruction manual!

6 GB/IE Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe caution and safety notes! Caution – electric shock! Danger to life! Risk of explosion! Risk of ﬁre! Warning - Hot surfaces! V~ Volt (AC) W Watts (Eﬀective power) W...

Page 7 - Please make sure you familiarise yourself fully with the way; Proper use; Soldering tip

7 GB/IE Introduction Soldering gun PLP 100 A1 Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the ﬁrst time and that you understand how to handle it correctly. Please read the operating instructions below. Be careful to keep these advi...

Page 8 - Included items

8 GB/IE Introduction 3 Soldering light 4 ON / OFF switch 5 Handle 6 Mains lead 7 Cutting tip 8 Tin solder 9 Open spanner 10 Solder ﬂux Included items 1 Soldering gun PLP 100 A11 Carry case 2 Soldering tips (1 cutting tip 7 premounted) 1 Open spanner 20 g Tin solder10 g Solder ﬂux1 Operating instruct...

Page 9 - Failure to observe the instructions and advice given; Workplace safety; Keep your working area clean and well lit.; Electrical safety; Keep the device away from rain or moisture.; Safety advice

9 GB/IE Safety advice CAUTION! Failure to observe the instructions and advice given below may result in electric shock, ﬁre and / or serious injury. 1. Workplace safety a) Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents. b) Do not work with the dev...

Page 10 - ronment is unavoidable.

10 GB/IE Safety advice ronment is unavoidable. The use of an RCD reduces the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away...

Page 12 - Electrical; Original accessories / attachments; The use of attachments or accessories other than; Use; and keep it pressed.

12 GB/IE Safety advice / Use 4. Careful handling and use of electrical power tools a) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let any-one use the device if he or she is not familiar with it or has not read the instructions and advice. Elect...

Page 13 - Pause: At least 48 seconds; Replacing a soldering tip

13 GB/IE Switching off: Release the ON / OFF switch 4 . Pause: At least 48 seconds CAUTION! Never heat up the device if it is not ﬁtted with a sol- dering tip. ATTENTION! Never use in continuous operation mode. The ﬂow of electrical current controls the delivery of soldering heat. As soon as the ON ...

Page 14 - Have your device repaired only by qual-; Warranty; Maintenance and cleaning / Service centre / Warranty

14 GB/IE Maintenance and cleaning WARNING! RISK OF INJURY! Before you carry out any work on the device always pull the mains plug out of the mains socket and allow the device to cool. Clean the device after you have ﬁnished using it. Use a cloth and a little mild detergent for cleaning the device. I...

Page 16 - Disposal / Declaration of Conformity / Manufacturer; Disposal; The packaging is wholly composed of environmentally-; Declaration of Conformity / Manufacturer

16 GB/IE Disposal / Declaration of Conformity / Manufacturer Disposal The packaging is wholly composed of environmentally- friendly materials that can be disposed of at a local recycling centre. Do not dispose of electrical devices with the household rubbish! In accordance with European Directive 20...

Page 17 - Applicable harmonized standards

17 GB/IE Declaration of Conformity / Manufacturer Applicable harmonized standards EN 55014-2/A1:2001EN 55014-1:2006EN 60335-2-45/A1:2008EN 60335-1/A13:2008EN 61000-3-2:2006EN 61000-3-3/A2:2005EN 62233:2008 Type / Device description: Soldering gun PLP 100 A1 Date of manufacture (DOM): 12 - 2010Serial...