Oster XVSA - Manuals

Oster XVSA – Manual in PDF format online.

Manuals:

Manual Oster XVSA

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - TO ADJUST THICKNESS OF SLICES; The adjusting nut turns with the shaft and adjust-; SHREDDER PLATE

2 TO INSTALL SHREDDER OR GRATER DISCS Stop the machine. Orient the plate with the cutting edge away from the shaft assembly. Locate the keyhole slots on the plateand slide the wide part of the slots over the studs on the plate holder. When the plate is flush with the holder, rotate it clock-wise to ...

Page 3 - TO REMOVE ATTACHMENT FROM POWER UNIT; Attach the housing of slicer to the attachment; PUSHER PLATE REMOVAL; Raise the Pusher Plate and slide it out of the slot in the door XVSD.; OPERATION

3 TO REMOVE XASP ADJUSTABLE SLICE PLATE ASSEMBLY FROMHOUSING Open the door all the way and raise the locking pin XP1007 (on top ofrear of housing) and the assembly will be free for removal by pullingoutward. TO REMOVE ATTACHMENT FROM POWER UNIT Loosen thumbscrew on power unit until hub is free for r...

Page 4 - MAINTENANCE INSTRUCTIONS; the holes in the housing.; Keep Hands out of Hopper – use a; These plates are sharp and must be

4 5. Close the slicer front door and fasten the latch. 6. Start the machine. Set at a speed to produce the best product (see machine manual) 7. Raise the pusher plate lever. 8. Place the food to be sliced in the hopper and gently press down on the pusher plate lever. Note: Too much pressure crushes ...

Oster Manuals